Category: Glassware & Labware
Showing 1–16 of 66 results
-
Glassware Kit (66)
1000mL 24/29 Glass Vacuum Distillation Extraction Distilling Apparatus Kit Lab Glassware Set
$190.58Glassware KitAdd to cartSpecificationGlassware:Size:QuantityPlastic Clip:24/29:4Vacuum Take-off Adapter:105° Bend, 24/29:1Vigreux Distilling Column with arm:24/29:1Celsius Thermometer:24/29:1Round Bottom Flask,Single Neck, 1000ml, 24/29:1Round Bottom Flask,Single Neck, 500ml, 24/29:1Liebig Distillation Column:200mm, 24/29:1Rubber Bleed Hose:2m, ID 6mm, OD 9mm:1Feature-1000ml vacuum distillation extract kit with 24/29 joint.– Perfect for school,factory,science lab vacuum distillation and extract usage.Package included1 x 1000ml Glass Distillation Apparatus Kit
1000ml 24/40 Distillation Apparatus Vacuum Distill Kit Vigreux Column with Arm
$93.14Glassware KitAdd to cart1000ml, 24/40, Distillation Apparatus, Vacuum Distill Kit, Vigreux Column With ArmPackage Included:GlasswareMark5 XPlastic clip for 24/40 joint24/401 XVacuum Take-off adapter,24/40105° Bend1 XThermometer Adapter With Screw24/40 joint1 XVigreux Distilling Column with Arm24/401 XRound bottom flask,single neck,24/40,1000ml1000ml1 XRound bottom flask,single neck,24/40,500ml500ml1 XLiebig Distillation Column24/40 200mm1 X2M Rubber HoseID6mm OD9mm1 XCelsius thermometer300mm
1000mL 24/40 Distillation Glass Apparatus Vacuum Distill Kit Vigreux Column Laboratory Glassware Kit
$153.89Glassware KitAdd to cartFeatures1000ml, 24/40, Distillation Apparatus, Vacuum Distill Kit, Vigreux Column with ArmPackage IncludedGlassware:Specification:QuantityRound Bottom Flask:Single Neck, 24/40,1000mL:1Round Bottom Flask:Single Neck, 24/40, 500mL:1Vigreux Distilling Column with Arm:24/40:1Liebig Distillation Column:24/40, 200mm:1Vacuum Take-Off Adapter:24/40, 105°Bend:1Rubber Hose:ID6mm, OD9mm:1Celsius Thermometer:300mm:1Thermometer Adapter with Screw:24/40 Joint:1Plastic Clip for 24/40 Joint:24/40:5
1000ml Glass Sand Core Vacuum Filtration Apparatus Liquid Solvent Filter Unit Device Flask Funnel Clamp Kit
$196.41Glassware KitAdd to cartDescriptionsGlass sand core vacuum filter device for chemical analysis, sanitary inspection, environmental monitoring, biological products, product industry, scientific research, etc., for filtering particles and bacteria.Such as oilfield water injection, analysis of suspended solids concentration, membrane filtration coefficient, particle diameter and sterility test, culture bacteria sterilization filtration.The sterilization and filtration of heat-sensitive drugs can achieve the …
100g/0.1g Table Balance Scale Mechanical Scale with Weights School Physics Teaching Tool
$64.79Glassware KitAdd to cartSpecificationMax Capacity:100gDivision:0.1gRuler Scale:5gTray Diameter:80mmDimension (L*W*H):210x80x135mmFeatures– 100 gram table balance scale set comes with 5 weights:5g, 10g, 20g (2X), 50g.– Before use, take away the black trig loop under the balance pan, put the index to 0, and adjust indicator to the middle line.– Also can balance the scale by adjusting the balance nut on both …
100g/0.1g Table Balance Scale Mechanical Scale with Weights School Physics Teaching ToolRead More
100mL Empty Plastic Sample Reagent Liquid Storage Bottle Graduated Small Mouth Laboratory Container
$6.06Glassware KitAdd to cartSpecificationMaterial:PE Plastic Color:White Translucent Capacity:100mLMouth Inner Diameter:13mmOverall Size:96x45mmFeatures– Durable, washable and reusable plastic products. – No harmful chemicals and very safe to use. – Screw sealing, good sealing performance with gasket, don’t be worry the contents will be spilling out. – Used for many applications include industrial, laboratory, personal and hobbies.– Small and convenient, easy …
100ml Plastic Measuring Cylinder Laboratory Test Liquid Alcohol Distiller
$10.11Glassware KitAdd to cartDescription100ml Plastic Measuring Cylinder Laboratory Test Liquid Alcohol Distiller, is ideal formeasuring Small and Large amounts of liquid.SpecificationColor:TransparentMaterial:PlasticCapacity:100MLWeight:54gSize:224*65mmFeature1. Plastic graduated cylinder for laboratory test.2. Ideal for measuring Small and Large amounts of liquid.3. Wide rim and a tapered pour spout for easy filling and pouring.4. The wide hexagon shaped base provides stability and makes the …
100ml Plastic Measuring Cylinder Laboratory Test Liquid Alcohol DistillerRead More
100pcs Foam Cleaning Swabs industrial Dust-Free Cotton Swab Sponge Stick Dustproof Rods
$26.31Glassware KitAdd to cartSpecificationType:Cotton SwabMaterial:PP + SpongeSwab Head Length:17mmTotal Length:160mm Weight:Approx. 120gQuantity:100PcsFeatures1.High quality foam cleaning swabs anti-static foam swabs for cleaning printer, computer, optical instrument camera lens, and all solvent printhead.2.Good aspiration, decontamination ability.3.High-quality absorbent cotton head and plastic rods are environmental-friendly and durable.4.Anti-corrosion, anti-static, no chippings, suitable for electronic products.Package Included100pcs Flattened Tipped Foam Cleaning Sponge Swabs
10Pcs 150mm OD 10mm 2.2mm Thick Wall Borosilicate Glass Blowing Tube
$30.36Glassware KitAdd to cartProduct DescriptionHigh quality borosilicate glass, Premium borosilicate tubing, preferred by scientific and artistic glassblowers world-wide. HEAVY wall tubing 10 pieces, 10mm outside diameter with a 2.2mm wall – all approximately 150mm long. This glass tube bends easily with propane (LPG) and oxygen mix. Brand new, high quality, heat and corrosion resistant. SpecificationName:10Pcs 150mm OD 10mm …
10Pcs 150mm OD 10mm 2.2mm Thick Wall Borosilicate Glass Blowing TubeRead More
10Pcs 150mm OD 11mm 2.2mm Thick Wall Borosilicate Glass Blowing Tube
$32.39Glassware KitAdd to cartProduct DescriptionHigh quality borosilicate glass, Premium borosilicate tubing, preferred by scientific and artistic glassblowers world-wide. HEAVY wall tubing 10 pieces, 11mm outside diameter with a 2.2mm wall – all approximately 150mm long. This glass tube bends easily with propane (LPG) and oxygen mix. Brand new, high quality, heat and corrosion resistant. SpecificationName:10Pcs 150mm OD 11mm …
10Pcs 150mm OD 11mm 2.2mm Thick Wall Borosilicate Glass Blowing TubeRead More
10Pcs 200mm Glass Stirring Mixing Rod Stirrer Mixer Sticks Rods Laboratory Experiment Glassware
$26.31Glassware KitAdd to cartSpecificationName:Glass Stirring RodMaterial:GlassColor:TransparentLength:200mm / 9.8inchDiameter:5~6mm / 0.2inchFeatures– Used in chemical experiments, a glassy slender rod-shaped simple agitator, also called a glass rod, is used to accelerate dissolution, promote mutual dissolution, drain, draw liquid, and stir in an evaporating dish to prevent splashing due to uneven heating. Especially in the middle school experiments, it is an …
10Pcs 200mm OD 7mm 1.5mm Thick Wall Borosilicate Glass Blowing Tube
$24.29Glassware KitAdd to cartSpecificationsName:10Pcs 200mm OD 7mm 1.5mm Thick Wall Borosilicate Glass Blowing Tube Material:Borosilicate GlassColor:TransparentLength:200mm/7.87inchOuter Diameter:7mm/0.28inchThick Wall:1.5mmApplicable:Apply to home, school, factory, laboratory and so on.Features– Resistant to high temperature and corrosion.– High quality Borosilicate Glass Blowing Tubes OD 7mm,100mm Length– Fire polished in both sides.– This glass tube bends easily with propane (LPG) and oxygen mix.Package Included10 …
10Pcs 200mm OD 7mm 1.5mm Thick Wall Borosilicate Glass Blowing TubeRead More
10Pcs 250mm OD 10mm 2.2mm Thick Wall Borosilicate Glass Blowing Tube
$31.59Glassware KitAdd to cartProduct DescriptionHigh quality borosilicate glass, Premium borosilicate tubing, preferred by scientific and artistic glassblowers world-wide. HEAVY wall tubing 10 pieces, 10mm outside diameter with a 2.2mm wall – all approximately 250mm long. This glass tube bends easily with propane (LPG) and oxygen mix. Brand new, high quality, heat and corrosion resistant. SpecificationName:10Pcs 250mm OD 10mm …
10Pcs 250mm OD 10mm 2.2mm Thick Wall Borosilicate Glass Blowing TubeRead More
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More