Category: Relay Module
Showing 17–32 of 713 results
100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay Module
$4.36Relay ModuleAdd to cartFeatures With optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference. Compatible with MCU and control board, 3V or 5V signal High level start, low level stop, PWM speed regulation Widely used to control the start and stop of the motor, solenoid …
100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay ModuleRead More
10pcs 1 Channel 12V Relay Module Relay Low Level Trigger
$15.58Relay ModuleAdd to cartDescription1. The module meets the international security standards, and there are isolation grooves between the control area and the load area.2. It has power supply and relay action instructions, and it can absorb and close brightly and disconnect not brightly.3. When there is a signal at the input end, the common end and the normal …
10pcs 1 Channel 12V Relay Module Relay Low Level TriggerRead More
10pcs 1 Channel 3.3V Low Level Trigger Relay Module Optocoupler Isolation Terminal
$30.09Relay ModuleAdd to cartDescriptionNormally open interface maximum load:AC 250V/10A, DC 30V/10A.SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.Fault-tolerant design, the relay will not move even if the control line is broken.Power indicator (green), relay status indicator (red).The interface is designed humanized, and all the interfaces can be directly connected by wiring terminals, which is very …
10pcs 1 Channel 3.3V Low Level Trigger Relay Module Optocoupler Isolation TerminalRead More
10pcs 1 Channel 5V HID Driverless USB Relay USB Control Switch Computer Control Switch PC intelligent Control Relay Module
$56.13Relay ModuleAdd to cart>>>Manual:Click here to openOverviewThis is USB controlled relay Board with 2 channels. It’s used the HID technology, so no need to install any driver in windows system and you can easy to use. We also provide an application and the C++ develop library that you can easy to integrate this module to your project.The relay …
10pcs 1 Channel 5V Relay Control Module Low Level Trigger Optocoupler Isolation
$21.61Relay ModuleAdd to cartFeatures1. This module meet safety standard, control areas and load area have the isolation groove;2. The double FR – 4 circuit board design, high-end SMT process;3. The relay control;4. it have power and relay operation instructions, and bright, disconnect the dawn;5. Signal input with low level signal, the common and often start conduction;6. Relay can …
10pcs 1 Channel 5V Relay Control Module Low Level Trigger Optocoupler IsolationRead More
10pcs 1 Channel 5v Relay Module High And Low Level Trigger
$23.61Relay ModuleAdd to cartDescriptionMaximum load:AC 250V/10A, DC 30V/10A.The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.Working voltage:5V.Every channel of the module can be set high or low level trigger by jumper.Fault tolerant design, even if the control line is disconnect, the relay will not act.Power indicator (green), 1 relay status indicator (red).The interface design is …
10pcs 1 Channel 5v Relay Module High And Low Level TriggerRead More
10pcs 1 Channel 5V Solid State Relay High Level Trigger DC-AC PCB SSR in 5VDC Out 240V AC 2A
$30.82Relay ModuleAdd to cartSpecificationsInput Power:5V DC (160mA)Static current 0mAWorking current 13.8mALoad current:2ATrigger voltage:5VSize:25*34*25mmPositioning Hole:17.4*28.4mmPackage Included10 x 1 Channel 5V Solid State Relay High Level Trigger
10pcs 1 Channel 5V USB Relay Switch Programmable Computer Control for Smart Home Module
$62.56Relay ModuleAdd to cartTipIt is recommended to use under win7, XP, win10 customer feedback can be used, and some can not, please consider carefully before placing an order.IntroductionThe module adopts HID technology, the quality of foreign trade, no need for any driver, the download data comes with the application, plug, and play. Support WIN7, XP 32-bit, 64-bit system, …
10pcs 1 Channel 5V USB Relay Switch Programmable Computer Control for Smart Home ModuleRead More
10pcs 1 Channel DC 12V Relay Module Solid State High Level Trigger 240V2A
$32.16Relay ModuleAdd to cartSpecificationInput Power Supply:12V DC Load Voltage:AC240V 2AMaximum operating current:13.8mATrigger mode:high levelInput control signal voltage(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interfaceDC +:positive power supply (by relay voltage power supply)DC-:connect power negativeCH:Relay Module signal triggering end (Low level trigger effective)Note:Power must be DC voltage and need …
10pcs 1 Channel DC 12V Relay Module Solid State High Level Trigger 240V2ARead More
10pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2A
$32.16Relay ModuleAdd to cartSpecificationInput Power Supply:12V DC Load Voltage:AC240V 2AMaximum operating current:13.8mATrigger mode:low levelInput control signal voltage(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interfaceDC +:positive power supply (by relay voltage power supply)DC-:connect power negativeCH:Relay Module signal triggering end (Low level trigger effective)Note:Power must be DC voltage and need …
10pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2ARead More
10Pcs 1-Channel 12V H/L Level Optocoupler Relay Module
$25.68Relay ModuleAdd to cart10Pcs 1-Channel 12V H/L Level Trigger Optocoupler Relay Module For Feature 1-channel relay module, with photoelectric isolation High or Low level changeable(by a jumper setting trigger) The module uses genuine quality relay With power and relay action indicator Operating voltage:12V Maximum load:AC 250V / 10A, DC 30V / 10A Size:44 x 24 x 17mm Weight:160g(10pcs) …
10Pcs 1-Channel 12V H/L Level Optocoupler Relay ModuleRead More
10Pcs 100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay Module
$19.95Relay ModuleAdd to cartFeaturesWith optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference.Compatible with MCU and control board, 3V or 5V signalHigh level start, low level stop, PWM speed regulationWidely used to control the start and stop of the motor, solenoid valve and other tributary …
10Pcs 100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay ModuleRead More
10Pcs 12V 2 Channel Relay Module with Optocoupler Support High Low Level Trigger
$45.32Relay ModuleAdd to cartFeatures1. The module uses genuine quality relay, normally open interfaces maximum load:AC 250V/10A, DC 30V/10A2. Using SMD OPTOCOUPLER isolation, driving ability, stable performance; trigger current 5mA3. The module voltage is 5V/9V/12 V/24V are available4. The module can be set to high or low triggered by jumper5. Fault-tolerant design, even if the control line is broken, …
10Pcs 12V 2 Channel Relay Module with Optocoupler Support High Low Level TriggerRead More
10pcs 12V DC 10A Bistable Relay Module for Car Modification Switch one-button Start-stop Self-locking
$44.35Relay ModuleAdd to cartSpecifications1. Power supply 12V;2. Press the button on the board or the external button to let the relay module pull or close. Press the pull button and then press the button to trigger the low level. The relay is in the off state when the power is turned back on;3. The maximum current of the …
10pcs 1CH Channel DC 12V 60-70MA Self-locking Relay Module Trigger Latch Relay Module Bistable
$54.35Relay ModuleAdd to cartDescriptionWorking voltage:DC 6-24VWorking current:60-70MAStandby current:1UALoad current:AC 250V/10A, DC 30V/10ATrigger mode:Low pulse triggerSize:48mm * 16mm * 18.5mm (L * W * H), Very small sizeWeight:14.3 gUSE 1By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on.USE 2By default, the …
10pcs 1CH Channel DC5V 70MA Self-locking Relay Module Trigger Latch Relay Module Bistable
$42.96Relay ModuleAdd to cartDescriptionWorking voltage:DC 5VWorking current:70MAStandby current:1UALoad current:AC 250V / 10A, DC 30V / 10ATrigger mode:Low pulse triggerSize:35mm * 16mm * 18.5mm (L * W * H), Very small size Weight:13.5 gUSE 1By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and …
10pcs 1CH Channel DC5V 70MA Self-locking Relay Module Trigger Latch Relay Module BistableRead More
Customers Also Viewed
PLZ 35-4400MHz Simple Spectrum Sweep Frequency Signal Source Power Meter CNC Aluminum Alloy Case
$116.99RF amplifierAdd to cartFeatures1. Signanl generator and spectrum analyzer frequency range:35M-4.4G2. MIN step:1K3. Output power(reference):0dBm@1G4. Frequency accuary(calibration):+-0.1k@1GHz5. Spectrum analyzer max liner input power:-10dBm6. Spectrum analyzer not damage input power:+10dBm7. MiniUSB power:+5V/0.3A8. Interface:USB, SMA@50┯9. Size(L*W*H):88*59*13mm10. Weight:140g11. Support XP/WIN7/WIN10 systemsPackage included1 x Spectrum analyzer 1 x USB cable
3Pcs DC-DC 15A Adjustable Boost Converter Constant Current Power Supply Module Car Charging Transformer LED Driver
$28.42Power Supply ModuleAdd to cartSpecificationModule name:400W boost constant current moduleModule nature:non-isolated boost module (BOOST)Input voltage:DC8.5V-50VInput current:15A (MAX) over 8A or module temperature over 65 degrees, please strengthen heat dissipationStatic working current:about 10mA (measured when 12V rises to 20V, the higher the output voltage, the higher the quiescent current will increase)Output voltage:10-60V continuously adjustable (suitable for applications where the input …
2Pcs 65*27mm Orange+Transparent Color Rubber Wheels for TT Motor Smart Chassis Car
$8.45Smart Robot & Solar PanelAdd to cartSpecifications– Diameter:65mm– Width:27mm– Centre hole:5.3 x 3.66mm (two sides is semicircle)– Material:Rubber(TPE)– Weight:about 50g– Color:Orange– For:TT motor/Smart Chassis Car DIY Part– Quantity:2PcsPackage Included2 x Orange Wheels
100 pcs DC 5V 5mW 650nm 6mm Laser Dot Diode Module Red Copper Head Tube
$44.86Other Module BoardAdd to cartFeaturesWorking life:more than 2000 hoursSpot mode:dot facula, continuous outputLaser wavelength:650nm (red)Copper head diameter:6mmLight powerSupply voltage:5V DCOperating currentOperating temperature:-36→ ~ 65→Power lead length:120mmShell material:brassSingle weight:1gPackage included100 x Laser diode dot
5pcs FXD-82B 12V Battery indicator Board Module Load 4 Digit Electricity indication with LED Lamp
$16.89Other Module BoardAdd to cartSpecificationsOn-board high-precision voltage detection chip and power supply voltage regulator chip onboard 4 power indicator LED lamp, divided into 3 colors display, red, yellow, yellow, green represents 20%, 50%, 80%, 100 (%) of the electricity Three Reserve a battery test interface and two mounting holes on-board high-precision voltage detection chip and power supply voltage regulator …
8FT 2.4m Strong Nylon Mesh Fishing Net Bait Easy Throw Hand Casting 3/4 w/ Sinker
$113.39Mesh & Wire ClothAdd to cartSpecificationName:Fishing NetMaterial:Nylon+GalvanizedColor:brownDiameter:2.4mFeatures1. Strong and durable material.2. Easy to use.3. Help you get more fish.Package Included1 x Fishing Net
1500 Pcs 2pF-0.1F Ceramic Capacitors Kit 30 Types with Component Box
$47.10Electronic Accessories & SuppliesAdd to cartFeatureCapacity:2pF-0.1μFCapacity:Quantity:Capacity:Quantity:Capacity:Quantity2pF:10:75pF:10:2200pF (2.2nF 222):103pF:10:82pF:10:3300pF (3.3nF 332):105pF:10:100pF (101):10:4700pF (4.7nF 472):1010pF:10:150pF (151):10:6800pF (6.8nF 682):1015pF:10:220pF (221):10:10nF (103):1022pF:10:330pF (331):10:15nF (153):1030pF:10:470pF (471):10:22nF (223):1033pF:10:680pF (681):10:47nF (473):1047pF:10:1000pF (1nF 102):10:68nF (683):1068pF:10:1500pF (1.5nF 152):10:100nF (0.1uF 104):10Package includes1500 x Ceramic Capacitors5 x Component Box
3pcs RobotDyn TP4056 Li-Ion Battery Charger Module with Protection Constant Current Constant Voltage
$11.02Power Supply ModuleAdd to cartDimensional drawing:Click here to openFeatureThe USB Li-Ion Battery Charger is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.And the Li-Ion Battery Charger can work within USB and 5V wall adapter. Other features include current monitor, under-voltage lockout, automatic recharge, and two …