Category: Relay Module
Showing 17–32 of 713 results
100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay Module
$4.36Relay ModuleAdd to cartFeatures With optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference. Compatible with MCU and control board, 3V or 5V signal High level start, low level stop, PWM speed regulation Widely used to control the start and stop of the motor, solenoid …
100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay ModuleRead More
10pcs 1 Channel 12V Relay Module Relay Low Level Trigger
$15.58Relay ModuleAdd to cartDescription1. The module meets the international security standards, and there are isolation grooves between the control area and the load area.2. It has power supply and relay action instructions, and it can absorb and close brightly and disconnect not brightly.3. When there is a signal at the input end, the common end and the normal …
10pcs 1 Channel 12V Relay Module Relay Low Level TriggerRead More
10pcs 1 Channel 3.3V Low Level Trigger Relay Module Optocoupler Isolation Terminal
$30.09Relay ModuleAdd to cartDescriptionNormally open interface maximum load:AC 250V/10A, DC 30V/10A.SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.Fault-tolerant design, the relay will not move even if the control line is broken.Power indicator (green), relay status indicator (red).The interface is designed humanized, and all the interfaces can be directly connected by wiring terminals, which is very …
10pcs 1 Channel 3.3V Low Level Trigger Relay Module Optocoupler Isolation TerminalRead More
10pcs 1 Channel 5V HID Driverless USB Relay USB Control Switch Computer Control Switch PC intelligent Control Relay Module
$56.13Relay ModuleAdd to cart>>>Manual:Click here to openOverviewThis is USB controlled relay Board with 2 channels. It’s used the HID technology, so no need to install any driver in windows system and you can easy to use. We also provide an application and the C++ develop library that you can easy to integrate this module to your project.The relay …
10pcs 1 Channel 5V Relay Control Module Low Level Trigger Optocoupler Isolation
$21.61Relay ModuleAdd to cartFeatures1. This module meet safety standard, control areas and load area have the isolation groove;2. The double FR – 4 circuit board design, high-end SMT process;3. The relay control;4. it have power and relay operation instructions, and bright, disconnect the dawn;5. Signal input with low level signal, the common and often start conduction;6. Relay can …
10pcs 1 Channel 5V Relay Control Module Low Level Trigger Optocoupler IsolationRead More
10pcs 1 Channel 5v Relay Module High And Low Level Trigger
$23.61Relay ModuleAdd to cartDescriptionMaximum load:AC 250V/10A, DC 30V/10A.The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.Working voltage:5V.Every channel of the module can be set high or low level trigger by jumper.Fault tolerant design, even if the control line is disconnect, the relay will not act.Power indicator (green), 1 relay status indicator (red).The interface design is …
10pcs 1 Channel 5v Relay Module High And Low Level TriggerRead More
10pcs 1 Channel 5V Solid State Relay High Level Trigger DC-AC PCB SSR in 5VDC Out 240V AC 2A
$30.82Relay ModuleAdd to cartSpecificationsInput Power:5V DC (160mA)Static current 0mAWorking current 13.8mALoad current:2ATrigger voltage:5VSize:25*34*25mmPositioning Hole:17.4*28.4mmPackage Included10 x 1 Channel 5V Solid State Relay High Level Trigger
10pcs 1 Channel 5V USB Relay Switch Programmable Computer Control for Smart Home Module
$62.56Relay ModuleAdd to cartTipIt is recommended to use under win7, XP, win10 customer feedback can be used, and some can not, please consider carefully before placing an order.IntroductionThe module adopts HID technology, the quality of foreign trade, no need for any driver, the download data comes with the application, plug, and play. Support WIN7, XP 32-bit, 64-bit system, …
10pcs 1 Channel 5V USB Relay Switch Programmable Computer Control for Smart Home ModuleRead More
10pcs 1 Channel DC 12V Relay Module Solid State High Level Trigger 240V2A
$32.16Relay ModuleAdd to cartSpecificationInput Power Supply:12V DC Load Voltage:AC240V 2AMaximum operating current:13.8mATrigger mode:high levelInput control signal voltage(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interfaceDC +:positive power supply (by relay voltage power supply)DC-:connect power negativeCH:Relay Module signal triggering end (Low level trigger effective)Note:Power must be DC voltage and need …
10pcs 1 Channel DC 12V Relay Module Solid State High Level Trigger 240V2ARead More
10pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2A
$32.16Relay ModuleAdd to cartSpecificationInput Power Supply:12V DC Load Voltage:AC240V 2AMaximum operating current:13.8mATrigger mode:low levelInput control signal voltage(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interfaceDC +:positive power supply (by relay voltage power supply)DC-:connect power negativeCH:Relay Module signal triggering end (Low level trigger effective)Note:Power must be DC voltage and need …
10pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2ARead More
10Pcs 1-Channel 12V H/L Level Optocoupler Relay Module
$25.68Relay ModuleAdd to cart10Pcs 1-Channel 12V H/L Level Trigger Optocoupler Relay Module For Feature 1-channel relay module, with photoelectric isolation High or Low level changeable(by a jumper setting trigger) The module uses genuine quality relay With power and relay action indicator Operating voltage:12V Maximum load:AC 250V / 10A, DC 30V / 10A Size:44 x 24 x 17mm Weight:160g(10pcs) …
10Pcs 1-Channel 12V H/L Level Optocoupler Relay ModuleRead More
10Pcs 100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay Module
$19.95Relay ModuleAdd to cartFeaturesWith optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference.Compatible with MCU and control board, 3V or 5V signalHigh level start, low level stop, PWM speed regulationWidely used to control the start and stop of the motor, solenoid valve and other tributary …
10Pcs 100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay ModuleRead More
10Pcs 12V 2 Channel Relay Module with Optocoupler Support High Low Level Trigger
$45.32Relay ModuleAdd to cartFeatures1. The module uses genuine quality relay, normally open interfaces maximum load:AC 250V/10A, DC 30V/10A2. Using SMD OPTOCOUPLER isolation, driving ability, stable performance; trigger current 5mA3. The module voltage is 5V/9V/12 V/24V are available4. The module can be set to high or low triggered by jumper5. Fault-tolerant design, even if the control line is broken, …
10Pcs 12V 2 Channel Relay Module with Optocoupler Support High Low Level TriggerRead More
10pcs 12V DC 10A Bistable Relay Module for Car Modification Switch one-button Start-stop Self-locking
$44.35Relay ModuleAdd to cartSpecifications1. Power supply 12V;2. Press the button on the board or the external button to let the relay module pull or close. Press the pull button and then press the button to trigger the low level. The relay is in the off state when the power is turned back on;3. The maximum current of the …
10pcs 1CH Channel DC 12V 60-70MA Self-locking Relay Module Trigger Latch Relay Module Bistable
$54.35Relay ModuleAdd to cartDescriptionWorking voltage:DC 6-24VWorking current:60-70MAStandby current:1UALoad current:AC 250V/10A, DC 30V/10ATrigger mode:Low pulse triggerSize:48mm * 16mm * 18.5mm (L * W * H), Very small sizeWeight:14.3 gUSE 1By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on.USE 2By default, the …
10pcs 1CH Channel DC5V 70MA Self-locking Relay Module Trigger Latch Relay Module Bistable
$42.96Relay ModuleAdd to cartDescriptionWorking voltage:DC 5VWorking current:70MAStandby current:1UALoad current:AC 250V / 10A, DC 30V / 10ATrigger mode:Low pulse triggerSize:35mm * 16mm * 18.5mm (L * W * H), Very small size Weight:13.5 gUSE 1By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and …
10pcs 1CH Channel DC5V 70MA Self-locking Relay Module Trigger Latch Relay Module BistableRead More
Customers Also Viewed
5PCS Cake Stand Set for Wedding Decorations White Table Kit Decorating Party Suppliers for Fondant Dessert Metal Cupcake Stand
$159.44Lab Clamp & StandAdd to cart5Pcs Metal Cupcake Stand Cake Dessert Wedding Event Party Display Tower Plate Features※ Ideal cake stand, widely used for personal birthday party, birthday, celebrations, banquets, marriage, graduation ceremony. ※ Used to display merchandise, play a very good decorative effect.※ This is also perfect for afternoon tea session. ※ High quality raw iron material, rejecting waste …
Robotdyn Digital Tilt Sensor Module Tilt Switch Angle
$8.73Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeatureDigital tilt sensor, have simple function, if the sensor are not placed on a strict flat surface, the little steel ball in the green tube will slip to one end of it, …
Robotdyn Digital Tilt Sensor Module Tilt Switch AngleRead More
20pcs LM317 DC-DC 1.5A 1.2-37V Adjustable Power Supply Board DC Converter Buck Step Down Module
$41.11Boost & Buck ModuleAdd to cartSpecificationsOutput Current:1.5A (minimum), 2.2A (typical value)Input-output voltage difference (VI-VO):40Vdc (max)Adjustable output voltage range:1.2 – 37VWorking temperature:-55 ° C to + 150 ° CCurrent output:1.5AVoltage Input:4.2 – 40 VOperating temperature:0 ° C – 125 ° CCharacteristic frequency:100 (MHz)Module size:35.6 (mm) x 16.8 (mm)Output mode:VOUT output positive, GND output negativePackage included20 x LM317 DC-DC 1.5A 1.2-37V adjustable …
4-way Switch Module Ewelink Phone Remote Control Small Voice DIY SCM Development Modified Board
$13.11Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Power supply descriptionThis module uses 5V DC power supply, usable with USB power supply equipment such as mobile phone charger, charging treasure, computer and so on.Enter descriptionIt can be connected with four …
MPR121-Breakout-v12 Proximity Capacitive Touch Sensor Controller Keyboard Development Board
$8.73Sensor & Detector ModuleAdd to cartDescriptionThis is a breakout board for Freescale’s MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface.The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be …
MPR121-Breakout-v12 Proximity Capacitive Touch Sensor Controller Keyboard Development BoardRead More
DG7512 75V 12A High Current Ideal Diode Solar Energy Anti-backflow Charging Anti-backflow Protection Low Resistance
$7.64Electronic Accessories & SuppliesAdd to cartSpecificationModule name:DG7512 anti-backflow ideal diodeWorking voltage:DC5-75VWorking current:12A (MAX) (without heat dissipation for a long time working within 10A,Can be used in parallel to increase operating current)Static operating current:0.7mAInput reverse connection protection:None (do not reverse the positive and negative poles, otherwise the chip will be burned)Working temperature:-40→~125→Connection method:welding outputModule size:25 *14*3.8mmPackage included1 x High Current Ideal …
HBV-1610 2MP Auto Focus Micro Mini USB2.0 Camera Module with Flash Light
$28.42Other Module BoardAdd to cartSpecificationsModel No.:HBV-1610Model Size:86.11mm ≠ 21mm ≠ 5.03mm÷0.2MMTemperature (Operation):-30C to 70CTemperature (Stable Image):0C to 50CAssembly technique:SMT (ROSH)Focus:AutoObject distance:30CM-infinityResolution:600LW/PH (Center)PCB printing ink:Blackinterface:USB 2.0Power supply:USB bus powersupply voltage:DC 5V÷5%Maximum Power consumption:730 mWOperating system request:Win XP/win 7,8 / vista /android 4.0/ mac /Linuxwith uvc Sensor:GT2005 (1/5” )Seneor Package:CSP,Bare DieMaximum resolution:1600*1200Sensitivity:33000mv /(lux-sec)Pixel Size:1.75m x 1.75┢m Maximum Image Transfer Rate:MJPEG 640×480 …
HBV-1610 2MP Auto Focus Micro Mini USB2.0 Camera Module with Flash LightRead More