Category: Relay Module
Showing 17–32 of 713 results
100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay Module
$4.36Relay ModuleAdd to cartFeatures With optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference. Compatible with MCU and control board, 3V or 5V signal High level start, low level stop, PWM speed regulation Widely used to control the start and stop of the motor, solenoid …
100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay ModuleRead More
10pcs 1 Channel 12V Relay Module Relay Low Level Trigger
$15.58Relay ModuleAdd to cartDescription1. The module meets the international security standards, and there are isolation grooves between the control area and the load area.2. It has power supply and relay action instructions, and it can absorb and close brightly and disconnect not brightly.3. When there is a signal at the input end, the common end and the normal …
10pcs 1 Channel 12V Relay Module Relay Low Level TriggerRead More
10pcs 1 Channel 3.3V Low Level Trigger Relay Module Optocoupler Isolation Terminal
$30.09Relay ModuleAdd to cartDescriptionNormally open interface maximum load:AC 250V/10A, DC 30V/10A.SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.Fault-tolerant design, the relay will not move even if the control line is broken.Power indicator (green), relay status indicator (red).The interface is designed humanized, and all the interfaces can be directly connected by wiring terminals, which is very …
10pcs 1 Channel 3.3V Low Level Trigger Relay Module Optocoupler Isolation TerminalRead More
10pcs 1 Channel 5V HID Driverless USB Relay USB Control Switch Computer Control Switch PC intelligent Control Relay Module
$56.13Relay ModuleAdd to cart>>>Manual:Click here to openOverviewThis is USB controlled relay Board with 2 channels. It’s used the HID technology, so no need to install any driver in windows system and you can easy to use. We also provide an application and the C++ develop library that you can easy to integrate this module to your project.The relay …
10pcs 1 Channel 5V Relay Control Module Low Level Trigger Optocoupler Isolation
$21.61Relay ModuleAdd to cartFeatures1. This module meet safety standard, control areas and load area have the isolation groove;2. The double FR – 4 circuit board design, high-end SMT process;3. The relay control;4. it have power and relay operation instructions, and bright, disconnect the dawn;5. Signal input with low level signal, the common and often start conduction;6. Relay can …
10pcs 1 Channel 5V Relay Control Module Low Level Trigger Optocoupler IsolationRead More
10pcs 1 Channel 5v Relay Module High And Low Level Trigger
$23.61Relay ModuleAdd to cartDescriptionMaximum load:AC 250V/10A, DC 30V/10A.The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.Working voltage:5V.Every channel of the module can be set high or low level trigger by jumper.Fault tolerant design, even if the control line is disconnect, the relay will not act.Power indicator (green), 1 relay status indicator (red).The interface design is …
10pcs 1 Channel 5v Relay Module High And Low Level TriggerRead More
10pcs 1 Channel 5V Solid State Relay High Level Trigger DC-AC PCB SSR in 5VDC Out 240V AC 2A
$30.82Relay ModuleAdd to cartSpecificationsInput Power:5V DC (160mA)Static current 0mAWorking current 13.8mALoad current:2ATrigger voltage:5VSize:25*34*25mmPositioning Hole:17.4*28.4mmPackage Included10 x 1 Channel 5V Solid State Relay High Level Trigger
10pcs 1 Channel 5V USB Relay Switch Programmable Computer Control for Smart Home Module
$62.56Relay ModuleAdd to cartTipIt is recommended to use under win7, XP, win10 customer feedback can be used, and some can not, please consider carefully before placing an order.IntroductionThe module adopts HID technology, the quality of foreign trade, no need for any driver, the download data comes with the application, plug, and play. Support WIN7, XP 32-bit, 64-bit system, …
10pcs 1 Channel 5V USB Relay Switch Programmable Computer Control for Smart Home ModuleRead More
10pcs 1 Channel DC 12V Relay Module Solid State High Level Trigger 240V2A
$32.16Relay ModuleAdd to cartSpecificationInput Power Supply:12V DC Load Voltage:AC240V 2AMaximum operating current:13.8mATrigger mode:high levelInput control signal voltage(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interfaceDC +:positive power supply (by relay voltage power supply)DC-:connect power negativeCH:Relay Module signal triggering end (Low level trigger effective)Note:Power must be DC voltage and need …
10pcs 1 Channel DC 12V Relay Module Solid State High Level Trigger 240V2ARead More
10pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2A
$32.16Relay ModuleAdd to cartSpecificationInput Power Supply:12V DC Load Voltage:AC240V 2AMaximum operating current:13.8mATrigger mode:low levelInput control signal voltage(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interfaceDC +:positive power supply (by relay voltage power supply)DC-:connect power negativeCH:Relay Module signal triggering end (Low level trigger effective)Note:Power must be DC voltage and need …
10pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2ARead More
10Pcs 1-Channel 12V H/L Level Optocoupler Relay Module
$25.68Relay ModuleAdd to cart10Pcs 1-Channel 12V H/L Level Trigger Optocoupler Relay Module For Feature 1-channel relay module, with photoelectric isolation High or Low level changeable(by a jumper setting trigger) The module uses genuine quality relay With power and relay action indicator Operating voltage:12V Maximum load:AC 250V / 10A, DC 30V / 10A Size:44 x 24 x 17mm Weight:160g(10pcs) …
10Pcs 1-Channel 12V H/L Level Optocoupler Relay ModuleRead More
10Pcs 100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay Module
$19.95Relay ModuleAdd to cartFeaturesWith optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference.Compatible with MCU and control board, 3V or 5V signalHigh level start, low level stop, PWM speed regulationWidely used to control the start and stop of the motor, solenoid valve and other tributary …
10Pcs 100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay ModuleRead More
10Pcs 12V 2 Channel Relay Module with Optocoupler Support High Low Level Trigger
$45.32Relay ModuleAdd to cartFeatures1. The module uses genuine quality relay, normally open interfaces maximum load:AC 250V/10A, DC 30V/10A2. Using SMD OPTOCOUPLER isolation, driving ability, stable performance; trigger current 5mA3. The module voltage is 5V/9V/12 V/24V are available4. The module can be set to high or low triggered by jumper5. Fault-tolerant design, even if the control line is broken, …
10Pcs 12V 2 Channel Relay Module with Optocoupler Support High Low Level TriggerRead More
10pcs 12V DC 10A Bistable Relay Module for Car Modification Switch one-button Start-stop Self-locking
$44.35Relay ModuleAdd to cartSpecifications1. Power supply 12V;2. Press the button on the board or the external button to let the relay module pull or close. Press the pull button and then press the button to trigger the low level. The relay is in the off state when the power is turned back on;3. The maximum current of the …
10pcs 1CH Channel DC 12V 60-70MA Self-locking Relay Module Trigger Latch Relay Module Bistable
$54.35Relay ModuleAdd to cartDescriptionWorking voltage:DC 6-24VWorking current:60-70MAStandby current:1UALoad current:AC 250V/10A, DC 30V/10ATrigger mode:Low pulse triggerSize:48mm * 16mm * 18.5mm (L * W * H), Very small sizeWeight:14.3 gUSE 1By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on.USE 2By default, the …
10pcs 1CH Channel DC5V 70MA Self-locking Relay Module Trigger Latch Relay Module Bistable
$42.96Relay ModuleAdd to cartDescriptionWorking voltage:DC 5VWorking current:70MAStandby current:1UALoad current:AC 250V / 10A, DC 30V / 10ATrigger mode:Low pulse triggerSize:35mm * 16mm * 18.5mm (L * W * H), Very small size Weight:13.5 gUSE 1By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and …
10pcs 1CH Channel DC5V 70MA Self-locking Relay Module Trigger Latch Relay Module BistableRead More
Customers Also Viewed
10Pcs 5V-30V Wide Voltage Trigger Delay Timer Relay Conduction Relay Module Time Delay Switch
$48.30Relay ModuleAdd to cartDescriptionWide voltage 5V-30VTime can be adjusted via a potentiometer, meeting your most occasionsMicro USB 5.0V power supply with input, easy to use5–30V wide supply voltageExternal triggering and onboard buttons Two triggering methodsWith a relay pull-in indicatorInterference ability, under various interference will not malfunction relay for industrial control.Module features1. Working voltage:Wide voltage any voltage between 5-30V, …
110-220V 150W Foldable Electric Cloth Hanger Travel Heating Dryer Drying Rack
$46.56Switch AccessoriesAdd to cartFeatures1. 3-hours fast drying. Use clothes to form a wind hood, so that the hot air flow gathers inside the clothes and circulates to achieve the purpose of fast drying.2. Dual mode, cold and hot air switching. It will automatic conver to cold air after 3h hot air drying.3. PTC heating, low power consumption, safe …
110-220V 150W Foldable Electric Cloth Hanger Travel Heating Dryer Drying RackRead More
20Pcs 10ml Metal Needle Empty Plastic Bottle Shisha E Cig Liquid Dropper
$19.08Bottles & JarsAdd to cartDescription20Pcs 10ml Metal Needle Empty Plastic Bottle Shisha E Cig Liquid Dropper SpecificationsMaterial:PECapacity:10mlSize:20X77mm / 0.79X3.0 inchNeedle Size:Inner Diameter =0.8mm, Outer Diameter =1.2mm, Length=12mmQuantity:20 pcsFeatures1. 10ml empty plastic bottle with metal needle2. Metal needle design,durable and easy to use3. Ideal for storing E cig liquid,solvents, light oils , eye drops, saline, etc.Package included20 X 10ml Empty …
20Pcs 10ml Metal Needle Empty Plastic Bottle Shisha E Cig Liquid DropperRead More
3Pcs AC-DC 3.5W Isolated AC 110V / 220V To DC 3.3V 1A Switch Power Supply Converter Module
$19.93Power Supply ModuleAdd to cartDescriptionsThe power supply is isolated industrial grade built-in power module with temperature protection, overcurrent and short circuit full protection.FeaturesAC85 – 264V or DC110 – 370V wide voltage inputDC3.3V(+/ -1%) 1A isolated outputInput Current:0.5mA/115VAC 0.25mA/230VACInput surge current:10A (230VAC)Frequency range:47-63HzOperating Temperature:-30 – 70 →Relative humidity:20%- 90%Rated power:3.5WOutput efficiency:61%Module size:5.1*2.3*1.8cmPackage included3 x AC-DC 3.5W Isolated AC 110V / …
3Pcs AC-DC 3.5W Isolated AC 110V / 220V To DC 3.3V 1A Switch Power Supply Converter ModuleRead More
3Pcs XL4015 5A DC-DC Step Down Adjustable Power Supply Module Buck Converter
$16.35Boost & Buck ModuleAdd to cartSpecificationModule highlights:5A high power, high efficiency and low ripple with power indicatorModule Properties:non-isolated buck module (BUCK)Input voltage:8-36V (input please try not to exceed 38V)Output voltage:1.25-32V continuously adjustableOutput Current:0-5AOutput Power:75WOperating temperature:-40 to +85 degreesOperating frequency:180KHzConversion efficiency:up to 96%Load regulation:S (I) ≤0.8% (input 24V, output 12V, load varies from 1 ~ 4.5A measured)Voltage Regulation:S (u) ≤0.8% (output …
3Pcs XL4015 5A DC-DC Step Down Adjustable Power Supply Module Buck ConverterRead More