Category: Relay Module
Showing 17–32 of 713 results
100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay Module
$4.36Relay ModuleAdd to cartFeatures With optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference. Compatible with MCU and control board, 3V or 5V signal High level start, low level stop, PWM speed regulation Widely used to control the start and stop of the motor, solenoid …
100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay ModuleRead More
10pcs 1 Channel 12V Relay Module Relay Low Level Trigger
$15.58Relay ModuleAdd to cartDescription1. The module meets the international security standards, and there are isolation grooves between the control area and the load area.2. It has power supply and relay action instructions, and it can absorb and close brightly and disconnect not brightly.3. When there is a signal at the input end, the common end and the normal …
10pcs 1 Channel 12V Relay Module Relay Low Level TriggerRead More
10pcs 1 Channel 3.3V Low Level Trigger Relay Module Optocoupler Isolation Terminal
$30.09Relay ModuleAdd to cartDescriptionNormally open interface maximum load:AC 250V/10A, DC 30V/10A.SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.Fault-tolerant design, the relay will not move even if the control line is broken.Power indicator (green), relay status indicator (red).The interface is designed humanized, and all the interfaces can be directly connected by wiring terminals, which is very …
10pcs 1 Channel 3.3V Low Level Trigger Relay Module Optocoupler Isolation TerminalRead More
10pcs 1 Channel 5V HID Driverless USB Relay USB Control Switch Computer Control Switch PC intelligent Control Relay Module
$56.13Relay ModuleAdd to cart>>>Manual:Click here to openOverviewThis is USB controlled relay Board with 2 channels. It’s used the HID technology, so no need to install any driver in windows system and you can easy to use. We also provide an application and the C++ develop library that you can easy to integrate this module to your project.The relay …
10pcs 1 Channel 5V Relay Control Module Low Level Trigger Optocoupler Isolation
$21.61Relay ModuleAdd to cartFeatures1. This module meet safety standard, control areas and load area have the isolation groove;2. The double FR – 4 circuit board design, high-end SMT process;3. The relay control;4. it have power and relay operation instructions, and bright, disconnect the dawn;5. Signal input with low level signal, the common and often start conduction;6. Relay can …
10pcs 1 Channel 5V Relay Control Module Low Level Trigger Optocoupler IsolationRead More
10pcs 1 Channel 5v Relay Module High And Low Level Trigger
$23.61Relay ModuleAdd to cartDescriptionMaximum load:AC 250V/10A, DC 30V/10A.The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.Working voltage:5V.Every channel of the module can be set high or low level trigger by jumper.Fault tolerant design, even if the control line is disconnect, the relay will not act.Power indicator (green), 1 relay status indicator (red).The interface design is …
10pcs 1 Channel 5v Relay Module High And Low Level TriggerRead More
10pcs 1 Channel 5V Solid State Relay High Level Trigger DC-AC PCB SSR in 5VDC Out 240V AC 2A
$30.82Relay ModuleAdd to cartSpecificationsInput Power:5V DC (160mA)Static current 0mAWorking current 13.8mALoad current:2ATrigger voltage:5VSize:25*34*25mmPositioning Hole:17.4*28.4mmPackage Included10 x 1 Channel 5V Solid State Relay High Level Trigger
10pcs 1 Channel 5V USB Relay Switch Programmable Computer Control for Smart Home Module
$62.56Relay ModuleAdd to cartTipIt is recommended to use under win7, XP, win10 customer feedback can be used, and some can not, please consider carefully before placing an order.IntroductionThe module adopts HID technology, the quality of foreign trade, no need for any driver, the download data comes with the application, plug, and play. Support WIN7, XP 32-bit, 64-bit system, …
10pcs 1 Channel 5V USB Relay Switch Programmable Computer Control for Smart Home ModuleRead More
10pcs 1 Channel DC 12V Relay Module Solid State High Level Trigger 240V2A
$32.16Relay ModuleAdd to cartSpecificationInput Power Supply:12V DC Load Voltage:AC240V 2AMaximum operating current:13.8mATrigger mode:high levelInput control signal voltage(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interfaceDC +:positive power supply (by relay voltage power supply)DC-:connect power negativeCH:Relay Module signal triggering end (Low level trigger effective)Note:Power must be DC voltage and need …
10pcs 1 Channel DC 12V Relay Module Solid State High Level Trigger 240V2ARead More
10pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2A
$32.16Relay ModuleAdd to cartSpecificationInput Power Supply:12V DC Load Voltage:AC240V 2AMaximum operating current:13.8mATrigger mode:low levelInput control signal voltage(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interfaceDC +:positive power supply (by relay voltage power supply)DC-:connect power negativeCH:Relay Module signal triggering end (Low level trigger effective)Note:Power must be DC voltage and need …
10pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2ARead More
10Pcs 1-Channel 12V H/L Level Optocoupler Relay Module
$25.68Relay ModuleAdd to cart10Pcs 1-Channel 12V H/L Level Trigger Optocoupler Relay Module For Feature 1-channel relay module, with photoelectric isolation High or Low level changeable(by a jumper setting trigger) The module uses genuine quality relay With power and relay action indicator Operating voltage:12V Maximum load:AC 250V / 10A, DC 30V / 10A Size:44 x 24 x 17mm Weight:160g(10pcs) …
10Pcs 1-Channel 12V H/L Level Optocoupler Relay ModuleRead More
10Pcs 100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay Module
$19.95Relay ModuleAdd to cartFeaturesWith optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference.Compatible with MCU and control board, 3V or 5V signalHigh level start, low level stop, PWM speed regulationWidely used to control the start and stop of the motor, solenoid valve and other tributary …
10Pcs 100V 9.4A FR120N Isolated MOSFET MOS Tube FET Relay ModuleRead More
10Pcs 12V 2 Channel Relay Module with Optocoupler Support High Low Level Trigger
$45.32Relay ModuleAdd to cartFeatures1. The module uses genuine quality relay, normally open interfaces maximum load:AC 250V/10A, DC 30V/10A2. Using SMD OPTOCOUPLER isolation, driving ability, stable performance; trigger current 5mA3. The module voltage is 5V/9V/12 V/24V are available4. The module can be set to high or low triggered by jumper5. Fault-tolerant design, even if the control line is broken, …
10Pcs 12V 2 Channel Relay Module with Optocoupler Support High Low Level TriggerRead More
10pcs 12V DC 10A Bistable Relay Module for Car Modification Switch one-button Start-stop Self-locking
$44.35Relay ModuleAdd to cartSpecifications1. Power supply 12V;2. Press the button on the board or the external button to let the relay module pull or close. Press the pull button and then press the button to trigger the low level. The relay is in the off state when the power is turned back on;3. The maximum current of the …
10pcs 1CH Channel DC 12V 60-70MA Self-locking Relay Module Trigger Latch Relay Module Bistable
$54.35Relay ModuleAdd to cartDescriptionWorking voltage:DC 6-24VWorking current:60-70MAStandby current:1UALoad current:AC 250V/10A, DC 30V/10ATrigger mode:Low pulse triggerSize:48mm * 16mm * 18.5mm (L * W * H), Very small sizeWeight:14.3 gUSE 1By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on.USE 2By default, the …
10pcs 1CH Channel DC5V 70MA Self-locking Relay Module Trigger Latch Relay Module Bistable
$42.96Relay ModuleAdd to cartDescriptionWorking voltage:DC 5VWorking current:70MAStandby current:1UALoad current:AC 250V / 10A, DC 30V / 10ATrigger mode:Low pulse triggerSize:35mm * 16mm * 18.5mm (L * W * H), Very small size Weight:13.5 gUSE 1By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and …
10pcs 1CH Channel DC5V 70MA Self-locking Relay Module Trigger Latch Relay Module BistableRead More
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More