5pcs MC106B Catalytic Combustion Gas Sensor Module for Flammable Gas Leak Alarm Detector Gas Concentration Meter
$32.55
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
>>> Manual:Click here to open
Principle Introduction
The MC106B catalytic combustion gas sensor works according to the principle of catalytic combustion effect. The detection element and the compensation element are paired to form an arm of the bridge. When the flammable gas is encountered, the resistance of the detection element increases and the output voltage of the bridge changes. The gas concentration increases to a proportional increase, and the compensation element functions as a reference and temperature and humidity compensation.
Features
The output voltage of the bridge is linear, the response speed is fast, it has good repeatability and selectivity, the component works stably and reliably, and it has good resistance to hydrogen sulfide and silicone interference.
Applications
It can be used to detect the concentration of flammable gases such as natural gas, liquefied gas, coal gas and alkanes in industrial sites. It can also be applied to flammable gas leak alarms, flammable gas detectors, and gas concentration meters.
Specifications
Product model:MC106B
Product type:Catalytic combustion gas sensor
Working voltage (V):2.5 ÷ 0.1
Working current (mA):150 ÷ 10
Sensitivity (mV):1% methane 15 ∥ 45; 1% propane 25 ∥ 65
Linearity:5%
Measuring range (% LEL):0 ~ 100
Response time (90%):10s
Recovery time (90%):30s
Operating environment:-40 ∥ + 70 →, lower than 95% RH
Storage environment:-20 ∥ + 70 →, lower than 95% RH
Package Included
5 x MC106B Catalytic Combustion Gas Sensor Module
Weight | 0.015 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.