inverter Boost High Voltage Generator 15KV High Frequency Transformer Arc Ignition Igniter Coil
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Use
School science experiment, electronic equipment, negative ion generator, small scientific production and so on.
Feature
This circuit works to produce a stable high-frequency arc, the temperature is extremely high, can easily ignite the combustible, so it was called a plasma lighter.
Note
This transformer high voltage winding in the inner layer, is the segment skeleton wound, low voltage winding in the outer layer, please do not mistaken for this transformer is high voltage winding and low voltage winding the same way.
The transformer has two primary winding, one of the main group is coarse copper wire, a group of fine copper wire for the feedback winding. The secondary output is high voltage.
Transformer in a coarse and a thin winding together two copper wire is positive, respectively, the main winding tail and feedback winding head, connect the power supply positive.
Before soldering the transformer, the soldering part of the enameled wire head of the paint need to gently scraping with blade and then soldering, please note.
Precautions for product use
1. After the successful production, the transformer must be sealed with epoxy resin or insulating wax to be used for a long time. The air-borne work in the air will cause the coil to break through damage due to the lack of air insulation.
2. The input voltage of the kit is 3.7v. That is, a section 18650 battery voltage, if you need to increase the input voltage (maximum increase to 12V), you need to increase the feedback resistor resistance (we default send 120 ohm), otherwise the transistor is easy to burn. Feedback resistance increased to 150┯ ~ 1.5K┯ or so, the resistance should be adjusted from large to small, do not too small, otherwise will burn transistor or transformer, and should not be too large, too much will impact the output or make the transistor work in the non-switch state to make the fever is serious hot.
transformer design for the 15KV maximum output, which is 1.5 cm arc, the higher the output voltage is likely to damage the transformer. For reliable long-term continuous work, it is recommended to use insulating wax or epoxy resin to completely seal it, prohibit no-load working when no sealed.
Specification
Input voltage:3.7V-4.2V
Current
Output voltage
Output current
High pressure two-stage ignition distance
Size is about:27 x 16 x 21mm (Manual measurement, please understand the error)
Package includes
1 x High Voltage Generator
Schematic diagram
In order to prevent the output 2-line distance too far, resulting in no-load, you can solder a pin in the output, and put the end of the needle into the arc, is conducive to the discharge arc, lik the following show
After the success of the production, if the output terminal connected to a high-voltage capacitor and three high voltage rectifier composed of voltage doubling circuit, can produce DC high voltage, can produce anion generator, the wiring diagram is as follows:
Weight | 0.018 kg |
---|
Customers Also Viewed
5Pcs 8*4 Level indicator Kit SMD Soldering Practice Board Audio Spectrum indicator
$46.40DIY Electronic KitsAdd to cartInstalltion instruction:http://img.staticbg.com/file/products/20180108011808ASD-84S-LED-Audio-spectrum-kit.pdfFeatureModel:ASD-84SWorking voltage:DC5VStandby current:≤ 5mAWorking current:≤35mASignal input method:3.5mm audio cableLED color:0805 red, green, blue, yellowPCB size:64.2mm x 36.5mmPCB mounting hole:3mmPCB mounting hole spacing:58.1 x 30.5mmNote:When installing the LED, please keep the same line in the same color.Button method:Operating mode:Screen display:Function setting Description:Default settingShort press:Fast flash mode:3:Display refresh very fast, very dynamic:2Medium speed mode:2:Display refresh is …
5Pcs 8*4 Level indicator Kit SMD Soldering Practice Board Audio Spectrum indicatorRead More
2Pcs TEC1-12712 40*40MM Semiconductor Refrigeration Chip High Power 12V10A Constant Temperature
$26.23Other Module BoardAdd to cartFeatureChip model:TEC1-12712Dimensions:40*40*3.6mm element pairs 127Wire specification:lead length 100÷5mm RV standard wire single head 5mm tinnedInternal resistance:1.0~1.2┯ (ambient temperature 23÷1→, 1kHZ Ac test)Maximum temperature difference:Tmax(Qc=0) 55→Working current:Imax=12A (at rated voltage start)Rated voltage:DC12V (Vmax:15.5V)Cooling power:Qcmax 72WAssembly pressure:85N/cm2Working environment:temperature range -55→∥83→ (high ambient temperature will directly affect the cooling efficiency)Packaging process:standard 704 silicone rubber seals aroundPackaging standard:foam box …
40khz 35W Ultrasonic Piezoelectric Cleaning Transducer Ultrasonic Plate
$22.26Switch AccessoriesAdd to cartSpecificationsModel:CH-S42-50×2.6Resonant frequency (KHz):40 ± 1Static capacitance (pF):8000 ± 10%Resonance impedance (Ω):≤20ΩDimensions:50 * 2.6mm (diameter * height)Power (W):35wInsulation resistance (2500V DC):≥ 100MΩFeatures1. Low heat. 2. Good thermal stability.3. Frequency and static capacitance strong consistency.4. Resonant impedance is low. 5. The average length of life.6. It can be widely used in a variety of ultrasonic cleaning equipment.7. …
40khz 35W Ultrasonic Piezoelectric Cleaning Transducer Ultrasonic PlateRead More
5pcs KY-004 Electronic Switch Key Module AVR PIC MEGA2560 Breadboard
$5.10Other Module BoardAdd to cartSpecifications 1. Rating:50mA 12VDC. 2. Contact Resistance:50mΩ max. (initial) 3. Insulation Resistance:100MΩ.(minDC 250V) 4. Dielectric Strength:AC250V.(50/60Hz for 1minute) 5. Electrically Life:100,000cycles. 6. Environment Temperature:-25° to +105°. 7. Operating Force:180/230.(±20gf) 8. Seal Temperature:250°-280°. Key switch module and a digital interface, built-in 13 LED build a simple circuit to produce key warning lamp.13 comes with digital interfaces …
5pcs KY-004 Electronic Switch Key Module AVR PIC MEGA2560 BreadboardRead More
ESP32-Aduio-Kit WiFi+ bluetooth Module ESP32 Serial to WiFi Audio Development Board with ESP32-A1S
$34.98Motherboard & Development BoardAdd to cartESP32-A1S:Click here to openInstruction:Click here to openIntroductionESP32-Audio-Kit is a small audio development board based on ESP32-A1S module. Most audio peripherals are distributed on both sides of the development board, supporting TF card, headphone output, two microphone inputs and two speaker outputs. It is convenient for developers to develop quickly. Suitable for home smart devices, smart …
10pcs Smart Electronics CD74HC4067 16-Channel Analog Digital Multiplexer PCB Board Module Geekcreit for Arduino – products that work with official Arduino boards
$15.59Other Module BoardAdd to cartSpecifications1.2V to 6V operation 2.“On Inch resistance:70 Ohms @ 4.5V 3.6ns break-before-make @ 4.5V 4.Wide operating temperature range:-50→ to 125→Features– This is a pcb board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.– This chip is like a rotary switch – it internally routes the common pinto one of 16 channel pins (CHANxx).– It works …
20pcs TK1305A 12V DC Multifunctional Time Delay Relay Module with Optocoupler Isolation
$89.45Relay ModuleAdd to cart>>>Manual:Click here to openFeaturesFunction 1:Trigger once (relay), then trigger once disconnect (disconnector), each time the relay is triggered once, the module has self-locking function.Function 2:Turn on immediately after triggering, and disconnect after the delay time arrives.Function 3:Disconnect immediately after triggering, and turn on after the delay time has elapsed. (Note:the relay will not be turned …
20pcs TK1305A 12V DC Multifunctional Time Delay Relay Module with Optocoupler IsolationRead More
Reviews
There are no reviews yet.