inverter Boost High Voltage Generator 15KV High Frequency Transformer Arc Ignition Igniter Coil
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Use
School science experiment, electronic equipment, negative ion generator, small scientific production and so on.
Feature
This circuit works to produce a stable high-frequency arc, the temperature is extremely high, can easily ignite the combustible, so it was called a plasma lighter.
Note
This transformer high voltage winding in the inner layer, is the segment skeleton wound, low voltage winding in the outer layer, please do not mistaken for this transformer is high voltage winding and low voltage winding the same way.
The transformer has two primary winding, one of the main group is coarse copper wire, a group of fine copper wire for the feedback winding. The secondary output is high voltage.
Transformer in a coarse and a thin winding together two copper wire is positive, respectively, the main winding tail and feedback winding head, connect the power supply positive.
Before soldering the transformer, the soldering part of the enameled wire head of the paint need to gently scraping with blade and then soldering, please note.
Precautions for product use
1. After the successful production, the transformer must be sealed with epoxy resin or insulating wax to be used for a long time. The air-borne work in the air will cause the coil to break through damage due to the lack of air insulation.
2. The input voltage of the kit is 3.7v. That is, a section 18650 battery voltage, if you need to increase the input voltage (maximum increase to 12V), you need to increase the feedback resistor resistance (we default send 120 ohm), otherwise the transistor is easy to burn. Feedback resistance increased to 150┯ ~ 1.5K┯ or so, the resistance should be adjusted from large to small, do not too small, otherwise will burn transistor or transformer, and should not be too large, too much will impact the output or make the transistor work in the non-switch state to make the fever is serious hot.
transformer design for the 15KV maximum output, which is 1.5 cm arc, the higher the output voltage is likely to damage the transformer. For reliable long-term continuous work, it is recommended to use insulating wax or epoxy resin to completely seal it, prohibit no-load working when no sealed.
Specification
Input voltage:3.7V-4.2V
Current
Output voltage
Output current
High pressure two-stage ignition distance
Size is about:27 x 16 x 21mm (Manual measurement, please understand the error)
Package includes
1 x High Voltage Generator
Schematic diagram
In order to prevent the output 2-line distance too far, resulting in no-load, you can solder a pin in the output, and put the end of the needle into the arc, is conducive to the discharge arc, lik the following show
After the success of the production, if the output terminal connected to a high-voltage capacitor and three high voltage rectifier composed of voltage doubling circuit, can produce DC high voltage, can produce anion generator, the wiring diagram is as follows:
Weight | 0.018 kg |
---|
Customers Also Viewed
LILYGO TTGO T-Watch SIM800L Bottom Programable PCB Expansion Board for Smart Box Development
$27.49Expansion Board & ShieldAdd to cartFeaturesDevelopment platform:ESP-IDF (native SDK), , Lua, MicroPython, ScratchSupport SIM card mobile communication functionSupport microphoneSupport voiceSupport for scalable module useCode:Click here to openESP32:Characteristic:DescriptionGPIO05:CS:Screen, TFT_CSGPIO18:SCLK:Screen, TFT_SCLKGPIO19:MOSI:Screen, TFT_MOSIGPIO27:DC:Screen, TFT_DCGPIO12:BL:Screen, TFT_BLESP32:Characteristic:DescriptionGPIO33:TX:SIM Card, UART_SIM_TXGPIO34:RX:SIM Card, UART_SIM_RXGPIO14:RST:SIM Card, SIM_RSTGPIO15:PWKEY:SIM Card, SIM_PWKEYGPIO04:BOOST:SIM Card, SIM_BOOST_CTRLPackage includes1 x T-Watch SIM800L PCB backplane1 x AntennaWiring with the T-watch box, for reference only, the T-watch does …
50 Pieces Fountain Pens Holder Wooden Pen Display Case with Antique Color Container 5 Layer
$278.83PhysicsAdd to cartSpecificationsColor:ArchaizeMaterial:Wood Box + Plexiglass CoverSize(L x W x H):about 270*200*245mm[Conversion:1mm=0.03937 inch, 1inch=25.4 mm]Features-Large pen cases, 50 mounted large-capacity, generous and practical design.-Wood box and beige color flannel inside, clear and elegant.-Durable without deformation, glass shatterproof, can be clearly seen.Package Included1 PCS x Wooden Pen Case(Pen not included)Note-Due to different producing batches, product details might be …
50 Pieces Fountain Pens Holder Wooden Pen Display Case with Antique Color Container 5 LayerRead More
220V 700W Powered Portable Electric Air Space Heater Fast Heating thermostat Hot
$58.71Solar CollectorsAdd to cartFeatures-The popular choice for heating bathrooms as well as kitchens.-Overheat protect.-Adjustable thermostat.-Handy carry handle.-Easy to adjust manual controls.-Anti-fire safety protection and are simple to install.Specification-Size:260mm*95mm*160mm-Rated voltage:220V-Colour:White-Rated power:700W-Mode of operation:mechanical-Rated power:700w-Switch type:knob type-Applicable area:21-30m2Package list-1x electric heater
50PCS 5ml Plastic Sample Small Bottle Vial Storage Container Test Tube for Lab
$24.29Bottles & JarsAdd to cartDescription50PCS 5ml Plastic Test Tube Centrifuge Tubes Bottle With Cap For Lab Supplies,Used to plug a flask or testtube for safe keeping. Test Tube. Used to mix, heat, or store substances.SpecificationMaterial:PPContain:5mlWeight:100g(50PCS)Color:TransparentQuantity:50pcsDiameter:14mmHeight:42mmFeatures1.Plastic cryogenic vial.2.Made from PP with good temperature resistance and sealing property.3.Various capacity with clear scale marked,easy to use.4.Self stnading design,no slide when using.5.Smooth side …
50PCS 5ml Plastic Sample Small Bottle Vial Storage Container Test Tube for LabRead More
3pcs 40W DC-AC inverter Power Supply 12V Liter 220V Step Up Transformer Boost Module Support in Parallel
$20.68Power Supply ModuleAdd to cartFeature1. Output DC and AC dual output, can output DC and AC voltage, fully compatible with all kinds of electric appliances2. Without connecting wires, you need to solder the input and output wires yourself.3. Instructions for use:This product can convert the DC power of 8V-13V battery into 220V AC power for household use, and DC …
45Pcs Solar intelligent Watering Timer Automatic Drip Irrigation + 10M Hose + Solar Panel + Copper Filter Nozzle
$109.34Electrical Relay & TimersAdd to cartFeatures> IP67 Waterproof> Indoor or oytdoor use.> Use clean water only.> Automatic water your plants and flowers precisely and at ease.> Reduce water by 70% over traditional sprinklers by focusing water directly to the root.> Flowers, plants, bonsai and potted fruit, for family homes, hotels, clubs, offices and other plants of intelligent care.> Watering the …
10Pcs 3W 5V LED Module Board High Power Module
$26.08LED BoardAdd to cartFeatureColor temperature:Warm White 3000-3200K / white 6000-6500KForward current:700MALuminous flux:White 180-200LM (lumens) , Red 90-100LM (lumens) , Green 80-90LM (lumens)Forward voltage:3.3 – 3.6 VReverse voltage:5VPower:3WViewing angle:180Working temperature:-20 to 60Storage temperature:20 to 60test cod (Click here)Package included10 x LED module
Reviews
There are no reviews yet.