inverter Boost High Voltage Generator 15KV High Frequency Transformer Arc Ignition Igniter Coil
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Use
School science experiment, electronic equipment, negative ion generator, small scientific production and so on.
Feature
This circuit works to produce a stable high-frequency arc, the temperature is extremely high, can easily ignite the combustible, so it was called a plasma lighter.
Note
This transformer high voltage winding in the inner layer, is the segment skeleton wound, low voltage winding in the outer layer, please do not mistaken for this transformer is high voltage winding and low voltage winding the same way.
The transformer has two primary winding, one of the main group is coarse copper wire, a group of fine copper wire for the feedback winding. The secondary output is high voltage.
Transformer in a coarse and a thin winding together two copper wire is positive, respectively, the main winding tail and feedback winding head, connect the power supply positive.
Before soldering the transformer, the soldering part of the enameled wire head of the paint need to gently scraping with blade and then soldering, please note.
Precautions for product use
1. After the successful production, the transformer must be sealed with epoxy resin or insulating wax to be used for a long time. The air-borne work in the air will cause the coil to break through damage due to the lack of air insulation.
2. The input voltage of the kit is 3.7v. That is, a section 18650 battery voltage, if you need to increase the input voltage (maximum increase to 12V), you need to increase the feedback resistor resistance (we default send 120 ohm), otherwise the transistor is easy to burn. Feedback resistance increased to 150┯ ~ 1.5K┯ or so, the resistance should be adjusted from large to small, do not too small, otherwise will burn transistor or transformer, and should not be too large, too much will impact the output or make the transistor work in the non-switch state to make the fever is serious hot.
transformer design for the 15KV maximum output, which is 1.5 cm arc, the higher the output voltage is likely to damage the transformer. For reliable long-term continuous work, it is recommended to use insulating wax or epoxy resin to completely seal it, prohibit no-load working when no sealed.
Specification
Input voltage:3.7V-4.2V
Current
Output voltage
Output current
High pressure two-stage ignition distance
Size is about:27 x 16 x 21mm (Manual measurement, please understand the error)
Package includes
1 x High Voltage Generator
Schematic diagram
In order to prevent the output 2-line distance too far, resulting in no-load, you can solder a pin in the output, and put the end of the needle into the arc, is conducive to the discharge arc, lik the following show
After the success of the production, if the output terminal connected to a high-voltage capacitor and three high voltage rectifier composed of voltage doubling circuit, can produce DC high voltage, can produce anion generator, the wiring diagram is as follows:
Weight | 0.018 kg |
---|
Customers Also Viewed
1L Pressure Washer Snow Foam Lance Jet Car Washer for Driveways Roofs Siding Cars
$72.89Solar CollectorsAdd to cartSpecificationsMaterial:Reinforced Nylon,Brass,PEHD(High Density Polyethylene)Color:WhiteCapacity:1LPressure Range:2000 psi – 5000 psiMax.temperature:60℃Size:about 28 x 20 x 8cmFeatures-High pressure water machine body, brass fitting-Easy to use, Perfect for Driveways, Roofs, Siding, Cars, Trucks, SUVs-Save your time and energy-Rinses clean with no residue-Application:Fit For lavor Jet, accessories of pressure washers, for cleaning the car.Package Included1 x Snow Foam Lance
20pcs 3S Lithium Battery Pack Power indicator Board Electric Vehicle Battery Power
$50.94Other Module BoardAdd to cartInstructionsConnect the positive and negative terminals of the display board and connect them to the positive and negative terminals of the tested battery. The digital display shows the real-time battery power.Power parameters3S lithium battery, full charge 12.6VBattery voltage is greater than N X 3.7V, light 3 grid powerThe battery voltage is less than N X …
20pcs 3S Lithium Battery Pack Power indicator Board Electric Vehicle Battery PowerRead More
24mm Exhaust Silencer & 25mm Filter Exhaust and intake Pipe for Air Diesel Heater Accessories
$74.91Laboratory Heating EquipmentsAdd to cartSpecificationModel number:A74487Product name:Air Diesel Heater AccessoryCondition:NewQuantity:1Exhaust PipeColor:SilverMaterial:Stainless steelLength:60cm (before stretch)Diameter:24mmAir Intake PipeColor:BlackMaterial:Aluminum foilLength:50cm (before stretch)Diameter:25mmPackage Included1 x 24mm Exhaust Silencer1 x 25mm Filter1 x 24mm Exhaust Pipe1 x 25mm Air Intake Pipe4 x 25mm Clamps3 x Screws1 x Bracket
DIY Portable Battery Storage Spot Welding Machine PCB Circuit Board with Charge Control Module Welding Spot Welders Pen
$54.66Other Module BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.OverviewEquipped with 3.7-4.2V 5000mA lithium battery, discharge rate up to 70C, output capacity of about 300A, output through MOS tube, this energy is concentrated at the end of the welding pen, through …
Drip Irrigation Kits Plant Watering Kit with Distribution Tubing Hose Irrigation System Automatic Irrigation Set
$56.69SwitchesAdd to cartSpecificationOUTERDO Drip Irrigation Kits is a widely use Irrigation Set, we can use it in automatic watering flowers, plants, vegetables. It supplies the convenience to use a micro irrigation system which precisely customized watering for each plant. It can save your time, water and money. Easy to use, suitable for beginners to learn home gardening.Feature1. …
10pcs LCD1602 LCD Shell for 1602 Blue/Yellow And I2C 1602 Blue/Yellow Green Backlight LCD Module Case
$33.82Electronic Accessories & SuppliesAdd to cartDescription Screen size:2.5 inches Material:acrylic Application 1602 Blue Backlight LCD Display Module:https://www.hobbyant.com/1Pc-1602-Character-LCD-Display-Module-Blue-Backlight-p-978160.htmlrmmds=search 1602 Yellow Backlight LCD Display Module:https://www.hobbyant.com/1Pc-1602-Character-LCD-Display-Module-Yellow-Backlight-For–p-978155.htmlrmmds=search I2C 1602 Blue Backlight LCD Display Module:https://www.hobbyant.com/IIC-I2C-1602-Blue-Backlight-LCD-Display-Module-For–p-950726.htmlrmmds=search I2C 1602 Yellow Green Backlight LCD Display Module:https://www.hobbyant.com/IICI2C-1602-Yellow-Green-Backlight-LCD-Display-Module-For–p-950728.htmlrmmds=search Package included 10 x LCD1602 LCD shell
Reviews
There are no reviews yet.