inverter Boost High Voltage Generator 15KV High Frequency Transformer Arc Ignition Igniter Coil
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Use
School science experiment, electronic equipment, negative ion generator, small scientific production and so on.
Feature
This circuit works to produce a stable high-frequency arc, the temperature is extremely high, can easily ignite the combustible, so it was called a plasma lighter.
Note
This transformer high voltage winding in the inner layer, is the segment skeleton wound, low voltage winding in the outer layer, please do not mistaken for this transformer is high voltage winding and low voltage winding the same way.
The transformer has two primary winding, one of the main group is coarse copper wire, a group of fine copper wire for the feedback winding. The secondary output is high voltage.
Transformer in a coarse and a thin winding together two copper wire is positive, respectively, the main winding tail and feedback winding head, connect the power supply positive.
Before soldering the transformer, the soldering part of the enameled wire head of the paint need to gently scraping with blade and then soldering, please note.
Precautions for product use
1. After the successful production, the transformer must be sealed with epoxy resin or insulating wax to be used for a long time. The air-borne work in the air will cause the coil to break through damage due to the lack of air insulation.
2. The input voltage of the kit is 3.7v. That is, a section 18650 battery voltage, if you need to increase the input voltage (maximum increase to 12V), you need to increase the feedback resistor resistance (we default send 120 ohm), otherwise the transistor is easy to burn. Feedback resistance increased to 150┯ ~ 1.5K┯ or so, the resistance should be adjusted from large to small, do not too small, otherwise will burn transistor or transformer, and should not be too large, too much will impact the output or make the transistor work in the non-switch state to make the fever is serious hot.
transformer design for the 15KV maximum output, which is 1.5 cm arc, the higher the output voltage is likely to damage the transformer. For reliable long-term continuous work, it is recommended to use insulating wax or epoxy resin to completely seal it, prohibit no-load working when no sealed.
Specification
Input voltage:3.7V-4.2V
Current
Output voltage
Output current
High pressure two-stage ignition distance
Size is about:27 x 16 x 21mm (Manual measurement, please understand the error)
Package includes
1 x High Voltage Generator
Schematic diagram
In order to prevent the output 2-line distance too far, resulting in no-load, you can solder a pin in the output, and put the end of the needle into the arc, is conducive to the discharge arc, lik the following show
After the success of the production, if the output terminal connected to a high-voltage capacitor and three high voltage rectifier composed of voltage doubling circuit, can produce DC high voltage, can produce anion generator, the wiring diagram is as follows:
Weight | 0.018 kg |
---|
Customers Also Viewed
5 Pcs Black Acrylic Wall Mounted Protective Case Support Cooling Fan for Raspberry Pi 4 Model B
$56.17Raspberry Pi & Orange PiAdd to cartDescription– Wall Mounting Available– Red Blue Black Optional– Support Adding Cooling Fan– Compatible With Raspberry Pi 4B– Make of Transparent Acrylic, could check the board status easilyThere is a Protective Film on the board surface, please take it off before using.Package Included5*Black Acrylic Case Kit
USB Rechargeable Automatic Electric Water Pump Dispenser Drinking Water Bottles
$28.34Switch AccessoriesAdd to cartElectric Charging Water Dispenser USB Charging Water Bottle Pump Dispenser Water Pumping DeviceFeatures1. One Button To Water:Just one button, immediately water, convenient and quick2. USB Charging:Using Android USB charging, long battery life3. Free Moving:Miniature and stylish design, can be carried anywhere at any time, light and easy4. Small Volume:Small size, large amount of water, quick …
USB Rechargeable Automatic Electric Water Pump Dispenser Drinking Water BottlesRead More
5Pcs 15cm Duinopeak PCB Ruler Measuring Tool Resistor Capacitor Chip IC SMD Diode Transistor Package
$24.08Electronic Accessories & SuppliesAdd to cartDescriptionThis versatile PCB ruler, it also integrates relevant information for PCB design such as angle gauges, devices, IC pin spacing tables, and more.Electronic enthusiasts in the design process in urgent need of a measurement tool can be set all the necessary functions.In addition to measuring the basic functions of millimeter and inch sizes, it also …
Geekcreit 4 Bits 4-digit Digital Tube LED Display Module Board
$6.55Display ScreenAdd to cartProgram & circuit schematic:>>>http://files.hobbyant.com/2018/09/SKU120072.zip SpecificationSize:42 x 24 x 12 mmTemperature display range:-9 to 60°CTemperature error correction setting feature, set the range:-5 to 5°CWorking voltage:3.3V~5V. (Note:the lower the voltage, the lower the luminance, the lower the power consumption)Package included1 x LED display module board
30x30cm Woven Wire 304 Stainless Steel Filtration Grill Sheet Filter 5 Mesh
$18.35Mesh & Wire ClothAdd to cartDescriptionStainless Steel Woven Wire is widely used in stainless steel mesh screen filter and protectivedecorative, scope throughout the mining, petroleum, chemical, food, medicine, machinerymanufacturing, construction, decoration, electronics, aerospace and other industries.SpecificationMaterial:Stainless steelSize:30x30cmMesh:5Features– Acid and alkali resistance, good corrosion performance; high strength, tensile, toughness and wear resistance, durable;– High temperature oxidation– Normal processing, plastic processing that …
30x30cm Woven Wire 304 Stainless Steel Filtration Grill Sheet Filter 5 MeshRead More
10pcs 6W 2.8V 3V 3.3V to 3.7V DC-DC Step Up Boost Converter for 18650 403040 Li-Po Li-ion Lithium Battery Module
$33.09Power Supply ModuleAdd to cartDescriptionDC DC Boost Converter Module working frequency 1MHZ.Up to 94% Efficiency (usually is 84%-91%)Quiescent current:0.19MA.Operating temperature range:-40~+85 Degrees CelsiusStorage temperature range:-65~+150 Degrees CelsiusSize:13 x 11 x 5.2mm(Ultra small & Ultra-thin) Weight:1g(Ultralight)ProtectionOver current protection(OCP)Over voltage protection(OVP)Short circuit protection(SCP)Over temperature protection(OTP) Pin descriptionVI:Input positive(+)GND:Input and Output negative(GND/-)VO:Output positive(+)Output 3.7VInput voltage:DC 2.6 ~ 4.5V, output:DC 5V±3%Maximum output:5V/1200MA (See …
20Pcs KY-040 Rotary Decoder Encoder Module
$43.69Decoder BoardAdd to cartDescriptionThe rotary encoder is used to measure the speed and with PWM technology can achieve rapid speed devicesWith fixed bolt hole for easy installationGreat for DIY projectSpecificationModel:KY-040Working voltage:5VMaterial:PCB + BrassWeight:10gSize:32 x 19 x 30mmPackage included20 x KY-040 rotary decoder module
40pcs 30cm Male To Male Jumper Cable Dupont Wire
$6.55Electronic Accessories & SuppliesAdd to cartDescription This is 40pcs 30cm male to male color breadboard jumper jump cable wire for 40pcs chromatic color male to male jumper wire High quality and in good working condition Durable and reusable Easy to install and use A popular choice for construction or repair Be used for electronic project and Genuine product Specification Length:30cm …
Reviews
There are no reviews yet.