ESP32-CAM WiFi + bluetooth Development Board ESP32 with FT232RL FTDI USB to TTL Serial Converter 40 Pin Jumper
$34.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
[ESP32-CAM Wireless Module]
Description
1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
2. ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
3. Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
4. ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
Features
– Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
– Low-power dual-core 32-bit CPU for application processors
– Up to 240MHz, up to 600 DMIPS
– Built-in 520 KB SRAM, external 4M PSRAM
– Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
– Support OV2640 and OV7670 cameras with built-in flash
– Support for images WiFI upload
-Support TF card
– Support multiple sleep modes
– Embedded Lwip and FreeRTOS
– Support STA/AP/STA+AP working mode
– Support Smart Config/AirKiss One-click distribution network
– Support for serial local upgrade and remote firmware upgrade (FOTA)
– Support secondary development
Note
This product contains the OV2640 Camera Module. If you need to use the OV7670 camera, please purchase it separately.
Product Specifications
Module model:ESP32-CAM
Package:DIP-16
Size:27*40.5*4.5(±0.2)mm
SPI Flash:default 32Mbit
RAM:internal520KB+external 4M PSRAM
bluetooth:bluetooth4.2BR/EDR and BLE standards
Wi-Fi:802.11 b/g/n/e/i
Support interface:UART, SPI, I2C, PWM
Support TF card:Maximum support 4G
IO port:9
Serial port rate:default 115200 bps
Image output format:JPEG (only supported by OV2640), BMP, GRAYSCALE
Spectrum range:2412 ~ 2484MHz
Antenna form:onboard PCB antenna , gain 2dBi
Transmit power:802.11b:17±2 dBm (@11Mbps)
802.11g:14±2 dBm (@54Mbps)
802.11n:13±2 dBm (@MCS7)
Receiving sensitivity:CCK, 1 Mbps:-90dBm
CCK, 11 Mbps:-85dBm
6 Mbps (1/2 BPSK):-88dBm
54 Mbps (3/4 64-QAM):-70dBm
MCS7 (65 Mbps, 72.2 Mbps):-67dBm
Power consumption:Turn off the flash:180mA@5V
Turn on the flash and adjust the brightness to the maximum:310mA@5V
Deep-sleep:The lowest power consumption can reach 6mA@5V
Moderm-sleep:up to 20mA@5V
Light-sleep:up to 6.7mA@5V
Security:WPA/WPA2/WPA2-Enterprise/WPS
Power supply range:5V
Operating temperature:-20 °C ~ 85 °C
Storage environment:-40 °C ~ 90 °C,
ESP32-CAM Picture Output Format Rate
:QQVGA:QVGA:VGA:SVGA
JPEG:6:7:7:8
BMP:9:9:-:-
GRAYSCALE:9:8:-:-
Test environment:camera model:OV2640 XCLK:20MHz, the module transmits pictures to the computer browser by WiFi.
For more files, please:file
[FT232RL Module]
FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse. You can use the modules in this kit to burn the program directly without additional purchase.
[Female to Female Dupont Jumper Wires]
The Jumper wires are made of high-grade copper wire material for safe and durable to use. This set contains 20cm 40pin male to male Jumper Wires, with which you can easier to complete the project.
Package Included
1 x ESP32-CAM Module
1 x Camera Module OV2640 2MP
1 x FT232RL Module
1 x Female to Female Dupont Jumper Wires
Weight | 0.046 kg |
---|
Customers Also Viewed
60V 17S 45A Li-ion Lithium Battery Protection Board BMS PCB System
$45.75Battery Protection ModuleAdd to cartNote:The protective plate cannot be used in parallel.SpecificationsContinuous discharging current:45AInstantaneous diacharge current:100ACharging voltage:67.2VCharging current:45AOver-charge detect:4.28±0.05VProtect delay:100msOver-charge release:4.08±0.05VBalanceDetect voltage:4.2±0.025VRelease voltage:4.2±0.05VBalance current:60±5mAOver-discharge:2.55±0.08VOver-discharge detect delay:50mSRelease voltage:2.9±0.1VDetect voltage:150mVDetect delay:15mSCurrent detect:130±10AResistance:≤15mΩWorking current:≤60uASleep current (when over-discharge):≤10uAWorking temperature:-30~80→Size:120 x 60 x 9mm:Details:Specification:Unit:RemarkCharge:Charging voltage:71.4:VRecharging current:45 (max):ADischarge:Continuous discharge current:45 (max):AInstantaneous discharge current:150 (max):AOvercharge protection:Overcharge detection voltage:4. 25 ±0.025:V:Single coreOvercharge protection delay:100:mSOvercharge release voltage:4. 05 …
60V 17S 45A Li-ion Lithium Battery Protection Board BMS PCB SystemRead More
25W 5V Foldable Solar Panel Solar Power Bank Pack with Dual USB Port for Backpack Camping Hiking
$78.68Smart Robot & Solar PanelAdd to cartFeatures∵ High-Efficiency Ponocrystalline Cell, up to 19%.∵ Eco-friendly & durable material.∵ Applied in charging 5V device as a power bank.∵ Portable, foldable and lightweight, with buckle to be fold firmly.∵ Produce continuous stable output even in cloudy day.∵ Suitable for outdoor activities, outdoor working or emergency.ParametersPmax:25WUSB Output Voltage:5VUSB1 Output Current:2000mA USB2 Output Current:1200mAQuantity of Single …
3Pcs Original Hiland DIY Multifunction Transistor Tester Kit for LCR ESR PWM Generator M328
$66.77DIY Electronic KitsAdd to cart3Pcs DIY Multifunction Transistor Tester Kit For LCR ESR Transistor PWM Signal Generator M328FeatureA key measurement operation , auto power off delay . Shutdown current is only 20nA, support battery operation.Automatic detection PNP and NPN type bipolar transistors , N, P -channel MOSFET, JFET FET , diodes , two diodes, thyristors , resistors , capacitors …
3Pcs Original Hiland DIY Multifunction Transistor Tester Kit for LCR ESR PWM Generator M328Read More
5pcs 2 Slots AAA Battery Box Battery Holder Board with Switch for2xAAA Batteries DIY kit Case
$9.36Other Module BoardAdd to cartSpecificationsSupport Model:AAA BatteryShell material:ABS Cable:1007 (150mm)Metal spring:carbon steel nickel plating by NCAA salt spray test, stainless steel spring.Size:53*24*13 mmPackage Included5 x 2 Slots AAA Battery Holder Plastic Case Storage Box
10pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module Converter
$86.01Sensor & Detector ModuleAdd to cartDescriptionThis is a conversion board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different voltage levels to communicate, voltage level translators can be the key to making different parts play nice.The PCA9306 is a dual bidirectional I2C-bus and SMBus voltage-level translator that’s operational on the low side from 1.0 V to …
10pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module ConverterRead More
5pcs Delay Timer Switch Adjustable 0-10sec with NE555 Electrical input 12V 10A
$18.51Relay ModuleAdd to cartDescriptionTiming from Microseconds to HOURSSimple CircuitryPrecision Pulse Generation / Timing,FMAX = 500 KHzUse a single 4 to 16 VDC supplyExcellent temperature stability 0.005% / °CAdjustable Duty CycleCountless Application and Information SourcesChip (NE555) CharacteristicWhen unconnected with the supply power, the state of the module is inchNOinch [ normal open ], CB and COM are conductive. CK …
5pcs Delay Timer Switch Adjustable 0-10sec with NE555 Electrical input 12V 10ARead More
Reviews
There are no reviews yet.