ESP32-CAM WiFi + bluetooth Development Board ESP32 with FT232RL FTDI USB to TTL Serial Converter 40 Pin Jumper
$34.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
[ESP32-CAM Wireless Module]
Description
1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
2. ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
3. Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
4. ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
Features
– Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
– Low-power dual-core 32-bit CPU for application processors
– Up to 240MHz, up to 600 DMIPS
– Built-in 520 KB SRAM, external 4M PSRAM
– Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
– Support OV2640 and OV7670 cameras with built-in flash
– Support for images WiFI upload
-Support TF card
– Support multiple sleep modes
– Embedded Lwip and FreeRTOS
– Support STA/AP/STA+AP working mode
– Support Smart Config/AirKiss One-click distribution network
– Support for serial local upgrade and remote firmware upgrade (FOTA)
– Support secondary development
Note
This product contains the OV2640 Camera Module. If you need to use the OV7670 camera, please purchase it separately.
Product Specifications
Module model:ESP32-CAM
Package:DIP-16
Size:27*40.5*4.5(±0.2)mm
SPI Flash:default 32Mbit
RAM:internal520KB+external 4M PSRAM
bluetooth:bluetooth4.2BR/EDR and BLE standards
Wi-Fi:802.11 b/g/n/e/i
Support interface:UART, SPI, I2C, PWM
Support TF card:Maximum support 4G
IO port:9
Serial port rate:default 115200 bps
Image output format:JPEG (only supported by OV2640), BMP, GRAYSCALE
Spectrum range:2412 ~ 2484MHz
Antenna form:onboard PCB antenna , gain 2dBi
Transmit power:802.11b:17±2 dBm (@11Mbps)
802.11g:14±2 dBm (@54Mbps)
802.11n:13±2 dBm (@MCS7)
Receiving sensitivity:CCK, 1 Mbps:-90dBm
CCK, 11 Mbps:-85dBm
6 Mbps (1/2 BPSK):-88dBm
54 Mbps (3/4 64-QAM):-70dBm
MCS7 (65 Mbps, 72.2 Mbps):-67dBm
Power consumption:Turn off the flash:180mA@5V
Turn on the flash and adjust the brightness to the maximum:310mA@5V
Deep-sleep:The lowest power consumption can reach 6mA@5V
Moderm-sleep:up to 20mA@5V
Light-sleep:up to 6.7mA@5V
Security:WPA/WPA2/WPA2-Enterprise/WPS
Power supply range:5V
Operating temperature:-20 °C ~ 85 °C
Storage environment:-40 °C ~ 90 °C,
ESP32-CAM Picture Output Format Rate
:QQVGA:QVGA:VGA:SVGA
JPEG:6:7:7:8
BMP:9:9:-:-
GRAYSCALE:9:8:-:-
Test environment:camera model:OV2640 XCLK:20MHz, the module transmits pictures to the computer browser by WiFi.
For more files, please:file
[FT232RL Module]
FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse. You can use the modules in this kit to burn the program directly without additional purchase.
[Female to Female Dupont Jumper Wires]
The Jumper wires are made of high-grade copper wire material for safe and durable to use. This set contains 20cm 40pin male to male Jumper Wires, with which you can easier to complete the project.
Package Included
1 x ESP32-CAM Module
1 x Camera Module OV2640 2MP
1 x FT232RL Module
1 x Female to Female Dupont Jumper Wires
Weight | 0.046 kg |
---|
Customers Also Viewed
High Efficiency AC 0V-220V SCR Voltage Regulator PWM Motor Speed Controller Dual Capacitor with Knob Current Protection
$24.29Solar CollectorsAdd to cartSpecificationProduct Name:4000W AC Voltage RegulatorEfficiency:over 90%SCR Model:BTA41600BWorking Voltage:220V ACSize:85 * 55 * 38 mm / knob iner:6 mmMaximum power:4000W (Resistive Load Limit Power)Suggest power:Less than 2000W (if for long time use)Regulating Voltage:AC 0-220V (from high to low) AC 10-220V (from low to high)Features– Thicker weld pass– Safety, set with fuse– standard 35A 4-bit wiring post– …
30pcs Universal PCB Board 9x15cm 2.54mm Hole Pitch DIY Prototype Paper Printed Circuit Board Panel Single Sided Board
$40.58Electronic Accessories & SuppliesAdd to cartFeaturesPremium one side prototype PCB printed circuit board, universal strip breadboard.All holes are plated through, smooth and clear.Sturdy and easy to use, the plated holes are very solid which makes it very easy to solder components on and they can hold up well and handle reasonable heat levels and dwell times.A good assortment of quality …
AD9834BRUZ Signal Source Module DDS Signal Generator Digital Signal Synthesis AD9834
$40.99Generator ModuleAdd to cartFeatures Complete AD9834 application circuit module. Onboard 3.3V LDO. Onboard 75.0000MHz active clock with internal/external clock source. Onboard output filter (see the schematic for filter parameters). Four-layer FR4 PCB board, ROHS compliant.More document click to download:AD9834BRUZPackage Included1 x AD9834BRUZ Signal Source Module DDS Signal Generator
3pcs DC-DC 8.5-48V To 10-50V 250W Continuous Adjustable High Power Boost Power Module Step Up Board
$39.45Power Supply ModuleAdd to cartSpecificationModule name:250W boost static current moduleModule properties:non-isolation boost module (BOOST)Input voltage:DC 8.5-48VInput current:10A (MAX), if exceeds 8A, please strengthen the heat dissipationStatic working current:10mA (12V up 20V, the higher the output voltage is, the higher the static current will increase)Output voltage:10-50V continuous adjustable if necessary (default output 19V delivery)Output current:10A MAX, if over 6A please …
10PCS 6PCS 6V 100mA 0.6W Polycrystalline Mini Epoxy Photovoltaic Solar Panel
$39.69Smart Robot & Solar PanelAdd to cartOn the use and testing ofProducts can only be in the sun, the nominal peak power is the midday sun, the sun early in the morning one night and not the strong sun is not up to the nominal, buyers pay attention to this point and in the light! inside the room, the solar panels …
10PCS 6PCS 6V 100mA 0.6W Polycrystalline Mini Epoxy Photovoltaic Solar PanelRead More
Diameter 15cm/5.9 inch Portable Air Conditioning Body Exhaust Duct interface Adapter
$30.36Switch AccessoriesAdd to cartSpecificationsColor:WhiteMaterial:ABSDiameter:15cm(5.9 Inch)Features– Applicable to part of mobile air conditioners with a diameter of 15cm. Fits for OLI, Royalstar, etc.– Used for connecting to the exhaust hose, and can be easily installed on the back of the portable air conditioner.– Please confirm if you can use it on your machine to purchase.And be sure to measure …
Diameter 15cm/5.9 inch Portable Air Conditioning Body Exhaust Duct interface AdapterRead More
10pcs DD0503MB DC to DC Converter Module 3.7V 4.2V 4.5V 5V 6V to 3.3V Step Down Module Buck Regulator
$27.65Power Supply ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionInput voltage 3.3-6V, output 3.3V (deviation +-4%)Long time mAximum output current 510mAShort time mAximum output current 710mAConversion efficiency:80-93%DC-DC Buck Step-down module working frequency 1.2MHZ. Operating ambient temperature:-40~+85 Degrees CelsiusSize 10.8x 7.7 x …
Reviews
There are no reviews yet.