ESP32-CAM WiFi + bluetooth Development Board ESP32 with FT232RL FTDI USB to TTL Serial Converter 40 Pin Jumper
$34.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
[ESP32-CAM Wireless Module]
Description
1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
2. ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
3. Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
4. ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
Features
– Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
– Low-power dual-core 32-bit CPU for application processors
– Up to 240MHz, up to 600 DMIPS
– Built-in 520 KB SRAM, external 4M PSRAM
– Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
– Support OV2640 and OV7670 cameras with built-in flash
– Support for images WiFI upload
-Support TF card
– Support multiple sleep modes
– Embedded Lwip and FreeRTOS
– Support STA/AP/STA+AP working mode
– Support Smart Config/AirKiss One-click distribution network
– Support for serial local upgrade and remote firmware upgrade (FOTA)
– Support secondary development
Note
This product contains the OV2640 Camera Module. If you need to use the OV7670 camera, please purchase it separately.
Product Specifications
Module model:ESP32-CAM
Package:DIP-16
Size:27*40.5*4.5(±0.2)mm
SPI Flash:default 32Mbit
RAM:internal520KB+external 4M PSRAM
bluetooth:bluetooth4.2BR/EDR and BLE standards
Wi-Fi:802.11 b/g/n/e/i
Support interface:UART, SPI, I2C, PWM
Support TF card:Maximum support 4G
IO port:9
Serial port rate:default 115200 bps
Image output format:JPEG (only supported by OV2640), BMP, GRAYSCALE
Spectrum range:2412 ~ 2484MHz
Antenna form:onboard PCB antenna , gain 2dBi
Transmit power:802.11b:17±2 dBm (@11Mbps)
802.11g:14±2 dBm (@54Mbps)
802.11n:13±2 dBm (@MCS7)
Receiving sensitivity:CCK, 1 Mbps:-90dBm
CCK, 11 Mbps:-85dBm
6 Mbps (1/2 BPSK):-88dBm
54 Mbps (3/4 64-QAM):-70dBm
MCS7 (65 Mbps, 72.2 Mbps):-67dBm
Power consumption:Turn off the flash:180mA@5V
Turn on the flash and adjust the brightness to the maximum:310mA@5V
Deep-sleep:The lowest power consumption can reach 6mA@5V
Moderm-sleep:up to 20mA@5V
Light-sleep:up to 6.7mA@5V
Security:WPA/WPA2/WPA2-Enterprise/WPS
Power supply range:5V
Operating temperature:-20 °C ~ 85 °C
Storage environment:-40 °C ~ 90 °C,
ESP32-CAM Picture Output Format Rate
:QQVGA:QVGA:VGA:SVGA
JPEG:6:7:7:8
BMP:9:9:-:-
GRAYSCALE:9:8:-:-
Test environment:camera model:OV2640 XCLK:20MHz, the module transmits pictures to the computer browser by WiFi.
For more files, please:file
[FT232RL Module]
FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse. You can use the modules in this kit to burn the program directly without additional purchase.
[Female to Female Dupont Jumper Wires]
The Jumper wires are made of high-grade copper wire material for safe and durable to use. This set contains 20cm 40pin male to male Jumper Wires, with which you can easier to complete the project.
Package Included
1 x ESP32-CAM Module
1 x Camera Module OV2640 2MP
1 x FT232RL Module
1 x Female to Female Dupont Jumper Wires
Weight | 0.046 kg |
---|
Customers Also Viewed
Geekwrom HD 3.5 inch TFT Display Shield 800×480 for Raspberry Pi 3B 2B + Acrylic Matching Case Kit
$121.30Raspberry Pi & Orange PiAdd to cartGeekwrom HD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2B + Acrylic Matching Case KitHD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2BFeatures– Demensions:85mm*56.5mm;– Resolution:800 x 480, 3.5 inch;– 267ppi High PPI display screen;– 11ms High Response Time(more than 60 fps);– 160° Wide Viewing Angle;– 900:1 High Contrast Ratio;– …
intelligent Screen Solar Pure Sine Wave Power inverter 1200W-6000W DC To AC 110V 120V Converter
$121.49InvertersAdd to cartWatt 1200W Voltage 12V Type Single digital display / Watt 2200W Voltage 12V Type Single digital display / Watt 3000W Voltage 12V Type Single digital display / Watt 3000W Voltage 24V Type Single digital display / Watt 3000W Voltage 48V Type Single digital displ
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable Heater
$48.59Solar CollectorsAdd to cartDescriptionMaterial:Stainless SteelColor:SilverPlug:US PlugVoltage:220-240V 50HzWattage:500WTemperature range:16-32°CCable Length:120cm/47.24inch(appr.)Heating Rod Length:41cm/16.14inch(appr.)FeaturesMade of stainless steel material, anti-rust, useful and durable.Double insulation & waterproof.Keep the water temperature steady.Suitable for aquarium:500L (for reference only).Simple adjustment and easy to read temperature indicator.Easy to install with 2 strong suckers (mounting distance of 2 suckers is about 9.5cm).Adjustment knob allows you to adjust the …
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable HeaterRead More
5pcs JoyStick Module Shield 2.54mm 5 pin Biaxial Buttons Rocker for PS2 Joystick Game Controller Sensor
$14.30Other Module BoardAdd to cartFeaturejoystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads.Phillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. This module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so, when pressed with the direction of the arrow, …
4Pcs Geekcreit Ultrasonic Module HC-SR04 Distance Measuring Ranging Transducers Sensor DC 5V 2-450cm
$9.83Sensor & Detector ModuleAdd to cartDescriptionWorking Voltage:5V(DC)Static Current:Less than 2mA.Output Signal:Electric frequency signal, high level 5V, low level 0V.Sensor Angle:Not more than 15 degrees.Detection Distance:2cm-450cm.High Precision:Up to 0.3cmInput Trigger Signal:10us TTL impulseSignal:output TTL PWL signalMode of connectionVCCtrig(T)ech0(R)GNDUse MethodSupply module with 5V, the output will be 5V while obstacle in range, or 0V if not.The out pin of this module is …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham Radio
$50.29RF amplifierAdd to cartApplicationBroadband RF power amplifier for all types of wireless applications, FM shortwave radios remote control toys, digital radio, etc., enter 1 milliwatt (0DBM) maximum output of 3 watts, 15V voltage supply, broadband work 1MHZ to 700MHZ can be work. As a result of well-designed, low end that can reach 35DBM (3W), at 500M, the output …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham RadioRead More
Reviews
There are no reviews yet.