ESP32-CAM WiFi + bluetooth Development Board ESP32 with FT232RL FTDI USB to TTL Serial Converter 40 Pin Jumper
$34.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
[ESP32-CAM Wireless Module]
Description
1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
2. ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
3. Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
4. ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
Features
– Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
– Low-power dual-core 32-bit CPU for application processors
– Up to 240MHz, up to 600 DMIPS
– Built-in 520 KB SRAM, external 4M PSRAM
– Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
– Support OV2640 and OV7670 cameras with built-in flash
– Support for images WiFI upload
-Support TF card
– Support multiple sleep modes
– Embedded Lwip and FreeRTOS
– Support STA/AP/STA+AP working mode
– Support Smart Config/AirKiss One-click distribution network
– Support for serial local upgrade and remote firmware upgrade (FOTA)
– Support secondary development
Note
This product contains the OV2640 Camera Module. If you need to use the OV7670 camera, please purchase it separately.
Product Specifications
Module model:ESP32-CAM
Package:DIP-16
Size:27*40.5*4.5(±0.2)mm
SPI Flash:default 32Mbit
RAM:internal520KB+external 4M PSRAM
bluetooth:bluetooth4.2BR/EDR and BLE standards
Wi-Fi:802.11 b/g/n/e/i
Support interface:UART, SPI, I2C, PWM
Support TF card:Maximum support 4G
IO port:9
Serial port rate:default 115200 bps
Image output format:JPEG (only supported by OV2640), BMP, GRAYSCALE
Spectrum range:2412 ~ 2484MHz
Antenna form:onboard PCB antenna , gain 2dBi
Transmit power:802.11b:17±2 dBm (@11Mbps)
802.11g:14±2 dBm (@54Mbps)
802.11n:13±2 dBm (@MCS7)
Receiving sensitivity:CCK, 1 Mbps:-90dBm
CCK, 11 Mbps:-85dBm
6 Mbps (1/2 BPSK):-88dBm
54 Mbps (3/4 64-QAM):-70dBm
MCS7 (65 Mbps, 72.2 Mbps):-67dBm
Power consumption:Turn off the flash:180mA@5V
Turn on the flash and adjust the brightness to the maximum:310mA@5V
Deep-sleep:The lowest power consumption can reach 6mA@5V
Moderm-sleep:up to 20mA@5V
Light-sleep:up to 6.7mA@5V
Security:WPA/WPA2/WPA2-Enterprise/WPS
Power supply range:5V
Operating temperature:-20 °C ~ 85 °C
Storage environment:-40 °C ~ 90 °C,
ESP32-CAM Picture Output Format Rate
:QQVGA:QVGA:VGA:SVGA
JPEG:6:7:7:8
BMP:9:9:-:-
GRAYSCALE:9:8:-:-
Test environment:camera model:OV2640 XCLK:20MHz, the module transmits pictures to the computer browser by WiFi.
For more files, please:file
[FT232RL Module]
FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse. You can use the modules in this kit to burn the program directly without additional purchase.
[Female to Female Dupont Jumper Wires]
The Jumper wires are made of high-grade copper wire material for safe and durable to use. This set contains 20cm 40pin male to male Jumper Wires, with which you can easier to complete the project.
Package Included
1 x ESP32-CAM Module
1 x Camera Module OV2640 2MP
1 x FT232RL Module
1 x Female to Female Dupont Jumper Wires
Weight | 0.046 kg |
---|
Customers Also Viewed
10pcs 433MHZ ASK Wireless Transmission Module TX11 High Power Module infinite Emission Circuit Board
$19.40Smart ModuleAdd to cartFeatures(1) The transmission power is large, and the transmission power is greater than 30 mW;(2) Wide operating voltage, 2.5V-9V;(3) Operating frequency:433.92 MHz(4) Using SAW frequency stabilization (+-75KHZ), the working frequency is stable;(5) With the RXB8 receiving module, the distance can reach 800 meters;(6) Static power consumption Low emission is current consumption:10mA, there is basically no …
SZWENGAO WG8-40S1210 8-40V to 12V 10A Automatic Buck Boost Power Converter Car Voltage Regulator Step Down Step Up Module
$39.35Boost & Buck ModuleAdd to cartFeatures*Designed according to CE/RoHS*100% full power, high stability output*100% full load aging test*Imported components*Imported high-quality thermal silica gel potting, waterproof, dustproof and shockproof* Die-cast aluminum alloy shell, small size, simple installation*Internal protection functions such as over current, low voltage, over temperature, short circuit, reverse connection, etc.*Wide voltage input, high conversion efficiency of 88-90%*Long service life …
10Pcs Wemos DS18B20 Module for D1 Mini DS18B20 Temperature Measurement Sensor Module
$36.17Sensor & Detector ModuleAdd to cartFeatures1. Supporting the D1 MINI2. The Ar-duino compatible, using A-rduino IDE for programming3. 11 the XI/O pins4. 1 XADC pin (0-3.3V)5. Support the OTA onlinePackage included10 x DS18B20 Module20 x Long female pin20 x Short female pin20 x Normal pin
ASK Wireless Receiving Module with Decoding EV1527 Encoding Transmitter
$10.92Smart ModuleAdd to cartFeaturesThe latest anti-lost code self-recovery function solves the trouble of losing code.The latest anti-interference software is involved to prevent accidental startWidely compatible, PT2262, PT2260, EV1527, PT2240, etc.Ultra-wide pulse width range:105 to 515 oscillating resistorsIn jog mode:support combination codeSelf-locking mode:support combination codeIn the interlock mode:4 independent open and close, the combination code is closedYou can learn …
ASK Wireless Receiving Module with Decoding EV1527 Encoding TransmitterRead More
50W 18V Monocrystaline Al-Alloy at back Solar Panel Dual 12V/5V DC USB Charger for Car RV Boat
$88.07Smart Robot & Solar PanelAdd to cartFeatures– EVA+PET at front panel and Al-Alloy at back, light-weight but durable.– USB and DC output interface for more purpose.– Equipped with 12V DC5.5×2.1 & 5V USB output interface.– Dedicated for 12V battery and 5V device charging. – High output 3000mAh USB, can full-charge an iX in 1.5h in max power.– Mono-crystalline solar Cell with …
Reviews
There are no reviews yet.