ESP32-CAM WiFi + bluetooth Development Board ESP32 with FT232RL FTDI USB to TTL Serial Converter 40 Pin Jumper
$34.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
[ESP32-CAM Wireless Module]
Description
1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
2. ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
3. Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
4. ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
Features
– Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
– Low-power dual-core 32-bit CPU for application processors
– Up to 240MHz, up to 600 DMIPS
– Built-in 520 KB SRAM, external 4M PSRAM
– Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
– Support OV2640 and OV7670 cameras with built-in flash
– Support for images WiFI upload
-Support TF card
– Support multiple sleep modes
– Embedded Lwip and FreeRTOS
– Support STA/AP/STA+AP working mode
– Support Smart Config/AirKiss One-click distribution network
– Support for serial local upgrade and remote firmware upgrade (FOTA)
– Support secondary development
Note
This product contains the OV2640 Camera Module. If you need to use the OV7670 camera, please purchase it separately.
Product Specifications
Module model:ESP32-CAM
Package:DIP-16
Size:27*40.5*4.5(±0.2)mm
SPI Flash:default 32Mbit
RAM:internal520KB+external 4M PSRAM
bluetooth:bluetooth4.2BR/EDR and BLE standards
Wi-Fi:802.11 b/g/n/e/i
Support interface:UART, SPI, I2C, PWM
Support TF card:Maximum support 4G
IO port:9
Serial port rate:default 115200 bps
Image output format:JPEG (only supported by OV2640), BMP, GRAYSCALE
Spectrum range:2412 ~ 2484MHz
Antenna form:onboard PCB antenna , gain 2dBi
Transmit power:802.11b:17±2 dBm (@11Mbps)
802.11g:14±2 dBm (@54Mbps)
802.11n:13±2 dBm (@MCS7)
Receiving sensitivity:CCK, 1 Mbps:-90dBm
CCK, 11 Mbps:-85dBm
6 Mbps (1/2 BPSK):-88dBm
54 Mbps (3/4 64-QAM):-70dBm
MCS7 (65 Mbps, 72.2 Mbps):-67dBm
Power consumption:Turn off the flash:180mA@5V
Turn on the flash and adjust the brightness to the maximum:310mA@5V
Deep-sleep:The lowest power consumption can reach 6mA@5V
Moderm-sleep:up to 20mA@5V
Light-sleep:up to 6.7mA@5V
Security:WPA/WPA2/WPA2-Enterprise/WPS
Power supply range:5V
Operating temperature:-20 °C ~ 85 °C
Storage environment:-40 °C ~ 90 °C,
ESP32-CAM Picture Output Format Rate
:QQVGA:QVGA:VGA:SVGA
JPEG:6:7:7:8
BMP:9:9:-:-
GRAYSCALE:9:8:-:-
Test environment:camera model:OV2640 XCLK:20MHz, the module transmits pictures to the computer browser by WiFi.
For more files, please:file
[FT232RL Module]
FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse. You can use the modules in this kit to burn the program directly without additional purchase.
[Female to Female Dupont Jumper Wires]
The Jumper wires are made of high-grade copper wire material for safe and durable to use. This set contains 20cm 40pin male to male Jumper Wires, with which you can easier to complete the project.
Package Included
1 x ESP32-CAM Module
1 x Camera Module OV2640 2MP
1 x FT232RL Module
1 x Female to Female Dupont Jumper Wires
Weight | 0.046 kg |
---|
Customers Also Viewed
MK1 Acrylic Remote Ver. Tony DIY Arc Reactor Lamp Kit Remote Control Illuminant LED Flash Light Heart Set
$70.86Engraving Parts & AccessoriesAdd to cartThe diaplay box and the bracket inchPROOF THAT TONY STARK HAS A HEARTinch is sold separately, please click that:ID:1429112The following chart shows different versions of our ARC reactor DIY model lamp, you can choose your favorite ones.ARC Reactor DIY Model Lamp Version:Please refer toMK1 Acrylic Frame Version:ID:1420733MK1 Aluminum Alloy Frame Version:ID:1434480MK2 Acrylic Frame Version:ID:1434467MK2 Stainless …
5pcs DC Motor Driver Board 2 Way DRV8833 Motor Drive Module DC 3-10V
$10.17Driver ModuleAdd to cartParametersSize:18.5 x 16 mmInput voltage:3-10VSingle H bridge output current:1.5A, can drive 2 dc deceleration motors.Built-in overcurrent protection, short circuit protection, undervoltage latching and overheating protection. Sleep mode with low power consumption.Purpose:drive dc motor and 4-wire stepping motor up to 1.5A.InstructionsULT low level is in sleep mode (need to disconnect J2 short welding spot behind the …
5pcs DC Motor Driver Board 2 Way DRV8833 Motor Drive Module DC 3-10VRead More
M5Stack ESP32 Open Source Faces Pocket Computer with Keyboard/Gameboy/Calculator Development Board
$177.66Smart ModuleAdd to cartIntroductionFACES Kit is a feast of functional panels, contains the most commonly used panels and keyboards with MEGA328 processor inside, communication protocol through IIC(0x08) as slave mode. With these 3 different panels, it will be very easy to support keyboard interaction with your M5Core.If you up for some classic video game, PyGamer panel plus M5Core …
10pcs 1S 3.7V 4A li-ion BMS PCM 18650 Battery Protection Board PCB for 18650 lithium Battery Double MOS
$13.12Battery Protection ModuleAdd to cartSpecificationsOvercharge detection voltage:4.25 ± 0.05VOvercharge release voltage:4.23 ± 0.05VOver discharge detection voltage:2.45 ± 0.1VUpper limit continuous current:4AOvercurrent detection current:5ACharging voltage:4.2VProduct Size:35 * 4 * 2.2MMIC components:DW01 + 8205A * 2 The main function:Overcharge protection, over discharge protection, short circuit protection, overcurrent protection.Wiring InstructionsB +:Connected to the battery positive.B-:Connected battery negative.P +:For the battery pack output …
CBB61 3Pcs 1.2UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run Capacitor
$4.04Module ComponentsAdd to cartFeatures1.Use polypropylene film with excellent electrical properties as the medium, and vaporize the metallized layer as the electrode under high vacuum conditions; 2.Use High-quality epoxy resin potting material is filled and sealed; the product has stable capacity, low loss, high pressure resistance, and good self-healing.3.Application:air conditioners, refrigerators, washing machines, electric fans, ovens, etc.SpecificationModel:CBB61Shell Material:ABSLine length:10cmShell …
CBB61 3Pcs 1.2UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run CapacitorRead More
Solar Charge Controller 15A LCD Display Controller Solar Controller for PWM Solar Power Panel Water Pump
$76.94Solar ControllersAdd to cart15A Controller For PWM Solar Panel Water PumpSpecificationMaterial:Acrylonitrile Butadiene Styrene (ABS)Color:BlackSize:14x9x3cmSystem voltage:12N/24V adaptiveUSB output:5V/2ACharging current:15ACharging voltage:13.7VRelease point cutoff voltage:10.7VWorking temperature:-20~+60°CFeaturesLCD displayPWM battery chargingAll necessary protections equippedAdjustable cotrolling parameter of the systemBuild-in industrial micro controllerBuild-in short-circuit protection, open-circuit protection, reverse protection,Over-load protection.Dual mosfet reverse current protection,low heat production.Application:Solar ControllerPackage include1 x solar controller
3pcs 5-30V 10A Wide Voltage Trigger Delay Relay Module Timer Module 2 Trigger Modes
$12.31Relay ModuleAdd to cartDescriptionTime can be adjusted by a potentiometer to meet the use of most of your occasions.With Micro USB 5.0V power supply input, it is very convenient to use.5-30V ultra wide power supply voltage.Two trigger modes:external trigger and onboard buttons trigger.It has a relay suction indicator.Strong anti-interference ability, all kinds of interference under the relay will …
3pcs 5-30V 10A Wide Voltage Trigger Delay Relay Module Timer Module 2 Trigger ModesRead More
Reviews
There are no reviews yet.