Flame Flare Detection Module Flame Sensor 12V Relay Board infrared Receiver Module
$7.11
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Usage
Various flames, fire source detection, relay output, can be connected to 220V high current equipment
Features
1. It can detect flame or light source with wavelength in the range of 760 nm to 1100 nm. The flame distance of the lighter is 80 cm. The larger the flame, the farther the test distance is.
2. The detection angle is about 60 degrees, especially sensitive to the flame spectrum
3. The sensitivity is adjustable (blue digital potentiometer adjustment in the figure)
4. The comparator output directly triggers the relay
5. The external dimensions:50x26x19mm, with fixed bolt holes for easy installation
6. The output has a blue terminal block, convenient wiring
Electrical parameters
Supply voltage:12VDC
Current:greater than 150mA
Load:250V 10A AC or 30V 10A DC
Instructions for use
1. The flame sensor is most sensitive to the flame and also responds to the sunlight. It is generally used for flame alarms and other purposes.
2. By adjusting the potentiometer, the intensity of the sensor’s induced flame can be set. When the flame exceeds the set threshold, the relay is closed, the common end is connected to the normally open end, and when the flame is lower than the set threshold, the relay is disconnected. The common end is connected to the normally closed end;
3. The common end, normally open, normally closed three ports are equivalent to a dual control switch, when the relay coil is powered, the common end is open to the normally open end, when there is no electricity, the common end and the normally closed end are turned on;
4. The sensor and the flame should be kept at a certain distance to avoid damage to the sensor at high temperature. The flame distance of the lighter is 80cm. The larger the flame, the farther the test distance is.
Package includes
1 x Flame sensor module
Weight | 0.017 kg |
---|
Customers Also Viewed
High-speed Isolation USB To TTL Serial Module Power Isolation Optocoupler Isolation
$15.30Converter BoardAdd to cartOverviewOptical isolation USB to TTL Serial Module Equipped with CH340T USB to serial chip, achieved the power and TTL signal isolation,High-speed and stability, it could avoid the damage of USB and computer blue screen or other issues while use the USB to TTLserial port module, due to improper operation or other external impact on the …
High-speed Isolation USB To TTL Serial Module Power Isolation Optocoupler IsolationRead More
3pcs 3.5mm Plug Jack Stereo TRRS Headset Audio Socket Breakout Board Extension Module
$4.46Converter BoardAdd to cartFeaturesName:Audio breakout board1. TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards.2. TRRS stands for “Tip, Ring, Ring, Sleeve, Inch which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground.3. Some devices use the extra conductor for a microphone …
3pcs 3.5mm Plug Jack Stereo TRRS Headset Audio Socket Breakout Board Extension ModuleRead More
6.5×55 Laser Bore Sighter Red Dot Sight 6.5mm x 55 Brass Cartridge Boresighter Caliber
$20.24Laser BoresighterAdd to cartCaution:Avoid direct eye exposure to the laser beam. Laser radiation is emitted from the aperture.SpecificationHousing Material:BrassLaser Type:Red LaserLaser Wavelength:635~655mmMax Output PowerPower Supply:3Pcs LR41 Batteries (NOT Included)Battery Installation:Positive side facing outwards. Look at your button cell battery, you will see inch+inch on the flat side commonly, which means positive. And the other slightly rounded side is …
6.5×55 Laser Bore Sighter Red Dot Sight 6.5mm x 55 Brass Cartridge Boresighter CaliberRead More
AD584 Voltage Reference 2.5V/5V/7.5V/10V High Precision Reference Source for Voltmeter Calibration
$32.36RF amplifierAdd to cartSpecificationInput voltage:15VOutput voltage:2.5V/5V/7.5V/10VAccuracy:0.0001Warn floating:15ppm/→Size:5*5cm(not included SMA)Package included1 x AD584 Voltage Reference 2.5V/5V/7.5V/10V High Precision Reference Source
5pcs LilyPad MCP9700 Temperature Sensor Module
$16.04Sensor & Detector ModuleAdd to cartDescriptionDetecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient temperature. Detect physical …
76M-108M 2-channel FM Transmitter Board Stereo Wireless Audio Transmission Transmitter Module
$33.20Other Module BoardAdd to cartDescriptionTwo-channel stereo FM transmitter moduleWorking voltage:DC 3V-16VWorking current:17mASize:49mm*31mmFunction description2-channel FM stereo transmissionPower-off memory functionworking frequency displayInput volume and transmission frequency are adjustablesupport wide voltage supplyworking current, small emission efficiency, high power supply, durableRestore factory settingsultra low back noiseInstructions for use– Key:short press, frequency reduction, 0.1MHz;+ key:Short press, increase the frequency by 0.1MHz, long press, restore …
80x50x20mm Corrosion Resistant Aluminum Split Body Aluminum Box Enclosure Case for Electronic DIY
$14.16Electronic Accessories & SuppliesAdd to cartFeaturesHeavy gauge extruded aluminum construction | Easier for drilling, soldering, screwing, problem fixing.Excellent electromagnetic shielding performance;Front and back panels and fasteners are included.Heavy gauge extruded aluminum construction.Excellent electromagnetic shielding performance.Built-in grooves for holding circuit board.Corrosion resistant, lightweight.Durable in use.Great for electronic projects, power supply units, student projects and amplifiers, etc.SpecificationMaterial:extruded aluminumColor:blackSize:80x50x20mmPackage Included1 x 80x50x20mm Enclosure …
4000Peak Power inverter DC12V To AC220V Power Converter Car USB Charger inverter Modified Sine Wave
$157.94InvertersAdd to cartPower InverterFeature– The power inverter can convert DC12V to AC220.– Overload, over temperature, short-circuit, low voltage, over voltage protection.– Stable performance and precise output voltage.Built-in cooling fan with low noise.– Comes with a car charger and a pair of crocodile clip, convenient to use.– Perfect for television, DVD player and other household appliances.Specifications– Color:Black– Frequency:50+/-3Hz– …
Reviews
There are no reviews yet.