Photosensitive Resistance Sensor with Relay Module 5V Optical Control Light Tracking Switch Module
$7.17
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Usage
Light detection, brightness detection, potentiometer can be adjusted to detect the brightness of the valve point, with its own relay, can do a variety of brightness detection switch.
Features
1. Using the photoresistor to induce the intensity of light, with its own relay, directly control the load
2. Adjust the sensitivity with the potentiometer. Set the start relay threshold by adjusting the potentiometer. When it is brighter, the module relay pulls in. When the threshold is dark, the relay is disconnected.
3. Working voltage 5V
4. Output form:load directly connected to AC 220V 10A or DC30V 10A
5. With 4 fixing bolt holes for easy installation
6. Small board PCB size:5cm x 2.6cm
7. Using a wide voltage LM393 comparator
Instructions for use
1. The photoresistor module is most sensitive to ambient light and is generally used to detect the brightness of ambient light.
2. When the ambient light exceeds the set threshold, the relay is closed, and the common end is connected to the normally open end. When the ambient light is lower than the set threshold, the relay is disconnected, and the common end is connected to the normally closed end;
3. The common end, normally open, normally closed three ports are equivalent to a dual control switch, when the relay coil is powered, the common end is open to the normally open end, when there is no electricity, the common end and the normally closed end are turned on;
Electrical parameters
Supply voltage:5VDC
Current:greater than 100mA
Load:250V 10A AC or 30V 10A DC
Package includes
1 x Relay Module with Photoresistor
Weight | 0.016 kg |
---|
Customers Also Viewed
433MHz 100M Wireless Transceiver Module Kit Transmitter + Receiver + 2pcs Copper Spring Antenna
$8.73Smart ModuleAdd to cartDescriptionSTX882 ASK Wireless Remote Control Transmitter ModuleSTX882 is a ASK transmitter module with small size, ultra high power, low harmonics. With high stability, it can be achieved at 50mW power when the voltage is 3.6V, it is the maximum transmitter power module under the the same voltage in the market. Data port of the module …
5V 3.3V FT232RL USB Module To Serial 232 Adapter Download Cable
$10.92Other Module BoardAdd to cart5V 3.3V FT232RL USB Module To Serial 232 Adapter Download Cable ForFeature1. With FT232RL chipset, support 3.3V, 5V2. With over current protection, using 500MA self-restore fuse3. RXD/TXD transceiver communication indicator4. Pin definition:DTR,RXD,TX,VCC,CTS,GNDPackage included1 x USB Module
12V/220V 2CH HIFI Audio Stereo Power Amplifier Bass bluetooth FM Radio Car Home
$74.91Solar CollectorsAdd to cartSpecificationsColo:BlackModel:G30Input voltage:AC 220V/ DC12V(in car)Plug:EU plug(sent with an adapter according to your country)bluetooth:SupportRMS power:18W x2Peak power:45W x2Load impedance:4-16ΩSNR:85 dbFM frequency:87.5-108MHzDistoration rate:0.05%Frequency:10Hz-20KHzSize:Approx. 19×12.5×4.5cm/ 7.48×4.92×1.77inchFeatures-Mini HIFI digital bluetooth audio power amplifier.-TF Card, AUX, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-With treble, bass, and volume control, very easy to use.-Low distortion supplies a …
12V/220V 2CH HIFI Audio Stereo Power Amplifier Bass bluetooth FM Radio Car HomeRead More
KY-011 5mm 2 Color Red and Green LED Common Cathode Module Board for Arduno Diy Starter Kit 2-color KY011
$4.36LED BoardAdd to cartSpecificationsColor:Green + RedDiameter:5mmPackage Type:DiffusionVoltage:2.0-2.5vCurrent:10mAViewing angle:150 degreeWavelength:571 +644 nmLuminous intensity (MCD):20-40; 40-80Stent type:long-leggedPackage Included1 x KY-011 Two Color Red and Green LED Module for Arduno
1000Pcs 5 Colors 3mm F3 Ultra Bright Round LED Diode Kit
$19.67Electronic Accessories & SuppliesAdd to cart1000Pcs 5 Colors 3mm F3 Ultra Bright Round LED Diode Kit Red / Green / Blue / White / YellowParameterWorking current:20 (mA)Working voltage:Red:1.9V-2.1V Yellow:1.9V-2.1V Blue:3.0V-3.2V Green:3.0V-3.2V White:3.0V-3.2VMCD:Red:1000-1500 Yellow:700-900 Blue:2000-3000 Green:7000-9000 White:6000-8000Wave length:Red:620-625 Yellow:588-590 Blue:455-465 Green:567-570 White:Color temperature 8000Each colors 200Pcs, total 1000PcsPackage included2 x 500Pcs 5 Colors LED Diode kit
4 Digit LED Display Tube 7 Segments TM1637 50x19mm Blue Clock Display Colon Module
$13.11Display ScreenAdd to cartFeatureThis is a basic 4-digit 7-segment display module.The display features double points in midle. The decimal point per digit not active.Module connecting to digital I/O on 2 pins.For Arduino use library:TM1637.hPackage includes1 x LED Display TubeSketch include inchTM1637.hinch // include the TM1637 libraryTM1637 display(2, 3);// // initialize the library for pins 2, 3void setup()void loop()
DIY LED Light String Kit Part for Lego 10267 House Model Building Gingerbread Flash
$69.97DIY Electronic KitsAdd to cartSpecification1. Name:LED Light Set2. Model:D858093. Material:Plastic4. Power:Less Than 5V5. Fitment:For Lego 10267Note1. LED Light Set Only. Toy is not included.2. Manual installtion. It needs to be assembled by yourself.Package Included10 x 15cm Bit Light(Warm White)1 x 15cm Enhance Bit Light(Warm White)4 x 30cm Flashing Bit Light(Red)4 x 30cm Flashing Bit Light(White)1 x Multi Colour Light …
DIY LED Light String Kit Part for Lego 10267 House Model Building Gingerbread FlashRead More
Reviews
There are no reviews yet.