ESP32-WROVER ESP32 IPEX Antenna 4MB SPI FLASH + 8MB PSRAM WiFi-BT-BLE MCU Wireless Module
$18.35
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Updated New Version ESP32-WROVER-B Module (February 21, 2019)
ESP32-WROVER-B is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. It features a 4 MB external SPI flash and an additional 8 MB SPI Pseudo static RAM (PSRAM).
Overviews
The chip embedded is designed to be scalable and adaptive. There are two CPU cores that can be individually controlled, and the clock frequency is adjustable from 80 MHz to 240 MHz. The user may also power off the CPU and make use of the low-power co-processor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C.
The integration of bluetooth, bluetooth LE and Wi-Fi ensures that a wide range of applications can be targeted,and that the module is future proof:using Wi-Fi allows a large physical range and direct connection to the internet through a Wi-Fi router, while using bluetooth allows the user to conveniently connect to the phone or broadcast low energy beacons for its detection.
The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications. ESP32 supports a data rate of up to 150 Mbps, and 20.5 dBm output power at the antenna to ensure the widest physical range. As such the chip does offer industry-leading specifications and the best performance for electronic integration, range, power consumption,and connectivity.
The operating system chosen for ESP32 is freeRTOS with LwIP; TLS 1.2 with hardware acceleration is built in as well. Secure (encrypted) over the air (OTA) upgrade is also supported, so that developers can continually upgrade their products even after their release.
WIKI:http://www.raspberrypiwiki.com/index.php/ESP32-WROVER_Module
Wrover datasheet:https://www.espressif.com/sites/default/files/documentation/esp32-wrover_datasheet_en.pdf
Categories:Items:Specifications
Certification:RF certification:FCC/CE-RED/SRRC/TELEC
Wi-Fi certification:Wi-Fi Alliance
bluetooth certification:BQB
Green certification:RoHS/REACH
Test:Reliablity:HTOL/HTSL/uHAST/TCT/ESD
Wi-Fi:Protocols:802.11 b/g/n (802.11n up to 150 Mbps)
A-MPDU and A-MSDU aggregation and 0.4 µs guard in-terval support
Frequency range:2.4 GHz ~ 2.5 GHz
bluetooth:Protocols:bluetooth v4.2 BR/EDR and BLE specification
Radio:NZIF receiver with –97 dBm sensitivity
Class-1, class-2 and class-3 transmitter
AFH
Audio:CVSD and SBC
Hardware:Module interfaces:SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, pulse
counter, GPIO, capacitive touch sensor, ADC, DAC
On-chip sensor:Hall sensor
Integrated crystal:40 MHz crystal
Integrated SPI flash:4 MB
Integrated PSRAM:8 MB
Operating voltage/ Power supply:2.3 V ~ 3.6 V
Operating current:Average:80 mA
Minimum current delivered by power supply:500 mA
Recommended operating tem-perature range:–40 °C ~ 85 °C
Package size:(18.00±0.10) mm * (31.40±0.10) mm * (3.30±0.10) mm
Package included
1 x ESP32-WROVER IPEX Antenna Module
Weight | 0.016 kg |
---|
Customers Also Viewed
M5Stack 5Pcs Grove-T Connector PH2.0 4Pin T Type Grove Header Wire Connector Terminal with 3 Ports Compatible with Grove Demoboard
$19.67Other Module BoardAdd to cartDescriptionCONNEXT-T is a T-shaped hub. Is this remind you the HUB unit They are basically the same thing, just in different shape.This is also used for CONNEXT port expanding.Notice:CONNEXT-T is just a hardware expander, if you are looking for hardware and software(standard protocol) expander like I2C, Single-bus, please check PaHUBor PbHUB. If you connectted two …
3Pcs PWM To Voltage Conversion Module 0-100% PWM To 0-10V Voltage
$32.16Converter BoardAdd to cartDescriptionUsing single chip embedded technology;Peak 4.5v to 10V level, jumper inserted at 5V. This level of signal mainly for conventional industrial control card (such as MACH3 board Card) 5V CPU interface;Easy to operate, can be fine-tuned by potentiometer;Select the PWM signal input level range through short cap;Module is small, easy to carry and use;Module operating …
3Pcs PWM To Voltage Conversion Module 0-100% PWM To 0-10V VoltageRead More
Gophert NPS-1601 32V 5A Adjustable Digital DC Power Supply CPS-3205II Upgraded
$176.16Electrical DC Power SupplyAdd to cartSpecificationsModel:NPS-1601Size:120*180*50mm(L*W*H)Net Weight:0.8KGOperation Voltage Range:198-264Vac/100-144VacOperation Frequency Range:45 – 65HZOutput Voltage Range:0 – 32VOutput Current Range:0 – 5AEfficiency (220Vac/full load):≥ 87% Full Load Input Current (220Vac):≤ 1.4ANo Load Input Current(220V):≤ 80mAVolt Meter Accuracy:≤ 0.1% + 2 digitAmp Meter Accuracy:≤ 0.1% + 3 digitsConstant VoltageLoad Regulation (0-100%):≤ 30mVLine Regulation(198-264Vac/100-144Vac):≤ 5mVRipple & Noise (Peak-Peak):≤ 10mVRipple & Noise (r.m.s):≤ 2mVSet …
Gophert NPS-1601 32V 5A Adjustable Digital DC Power Supply CPS-3205II UpgradedRead More
20pcs 1A DC-DC 3V to 5V Converter Step Up Boost Mobile Power Supply Module
$39.29Power Supply ModuleAdd to cartFeatureSize:20 x 20 x 5mm/0.78 x 0.78 x 0.19(inch) (approx)Module properties:non-isolated boost Rectification:non-synchronous rectification Input voltage:2.5V-6V Output voltage:4V-12V (adjustable) Output current:1000mA (Max) Conversion efficiency:92% (the highest)Switching frequency:1MHzOutput ripple:20mV (max) Load regulation:± 0.5%Voltage regulation:± 2.5%NoteFormula output:VOUT = (R1/R2 +1v) * 0.6VDefault resistance:R1 = 150K R2 = 20K (unit:ohm)By adjusting the voltage of this formula, which is …
20pcs 1A DC-DC 3V to 5V Converter Step Up Boost Mobile Power Supply ModuleRead More
3Pcs TDA7266 Audio Power Amplifier Module
$17.52Amplifier BoardAdd to cartDescription1. The on-board TDA7266 audio power amplifier chip, double track 7W + 7W, suitable for 4-8ohm 5-15W speakers2. The main pin has led chip, convenient external device control, on-board 2 way 5.08(mm) pitch 2P terminal, represent left and right channel output3. The on-board dial potentiometer, can adjust the output volume4. Support DC socket, terminal blocks, …
WIFI Module Serial Port to WIFI TI CC3200 Wireless Transparent Communication industrial Grade Low Power Consumption
$31.83Smart ModuleAdd to cartFeature1. TI’s CC3200 solution:based on the ARM Cortex-M4 core, running at up to 80MHz;2. Ultra-low power consumption:lower power consumption than wifi low-power series, low on-line standby to 3.5mA, deep sleep to 25uA;3. Ultra-small size:18.22*26.65*2.8(mm);4. High-speed UART:baud rate support up to 3M bps (special firmware needs to be upgraded);5. Simplelink:One-click connection to Wi-Fi network;6. Dual serial …
5.5×2.1mm DC Connector Plug with Screw Locking And Metal Panel Mount Socket
$16.19Switch AccessoriesAdd to cartSpecificationsOutside diameter:5.5mmInside diameter:2.1mmShaft length:10mmOverall length:52mmFeatures– Standard DC plug socket– Computer/Tablet/Netbook accessories– Maximum Panel Thickness – 2mm– Diameter of fitting hole – 8mm– Voltage rating – 0-24V DC/3 Amp– Pin layout – 3 pin (pos,neg,switched)– Complete with Washer/Nut– Standard solder tag type– Ideal for projects, repairs etcPackage Included1 x 5.5×2.1mm DC Connector Plug
Reviews
There are no reviews yet.