ESP32-WROVER ESP32 IPEX Antenna 4MB SPI FLASH + 8MB PSRAM WiFi-BT-BLE MCU Wireless Module
$18.35
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Updated New Version ESP32-WROVER-B Module (February 21, 2019)
ESP32-WROVER-B is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. It features a 4 MB external SPI flash and an additional 8 MB SPI Pseudo static RAM (PSRAM).
Overviews
The chip embedded is designed to be scalable and adaptive. There are two CPU cores that can be individually controlled, and the clock frequency is adjustable from 80 MHz to 240 MHz. The user may also power off the CPU and make use of the low-power co-processor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C.
The integration of bluetooth, bluetooth LE and Wi-Fi ensures that a wide range of applications can be targeted,and that the module is future proof:using Wi-Fi allows a large physical range and direct connection to the internet through a Wi-Fi router, while using bluetooth allows the user to conveniently connect to the phone or broadcast low energy beacons for its detection.
The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications. ESP32 supports a data rate of up to 150 Mbps, and 20.5 dBm output power at the antenna to ensure the widest physical range. As such the chip does offer industry-leading specifications and the best performance for electronic integration, range, power consumption,and connectivity.
The operating system chosen for ESP32 is freeRTOS with LwIP; TLS 1.2 with hardware acceleration is built in as well. Secure (encrypted) over the air (OTA) upgrade is also supported, so that developers can continually upgrade their products even after their release.
WIKI:http://www.raspberrypiwiki.com/index.php/ESP32-WROVER_Module
Wrover datasheet:https://www.espressif.com/sites/default/files/documentation/esp32-wrover_datasheet_en.pdf
Categories:Items:Specifications
Certification:RF certification:FCC/CE-RED/SRRC/TELEC
Wi-Fi certification:Wi-Fi Alliance
bluetooth certification:BQB
Green certification:RoHS/REACH
Test:Reliablity:HTOL/HTSL/uHAST/TCT/ESD
Wi-Fi:Protocols:802.11 b/g/n (802.11n up to 150 Mbps)
A-MPDU and A-MSDU aggregation and 0.4 µs guard in-terval support
Frequency range:2.4 GHz ~ 2.5 GHz
bluetooth:Protocols:bluetooth v4.2 BR/EDR and BLE specification
Radio:NZIF receiver with –97 dBm sensitivity
Class-1, class-2 and class-3 transmitter
AFH
Audio:CVSD and SBC
Hardware:Module interfaces:SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, pulse
counter, GPIO, capacitive touch sensor, ADC, DAC
On-chip sensor:Hall sensor
Integrated crystal:40 MHz crystal
Integrated SPI flash:4 MB
Integrated PSRAM:8 MB
Operating voltage/ Power supply:2.3 V ~ 3.6 V
Operating current:Average:80 mA
Minimum current delivered by power supply:500 mA
Recommended operating tem-perature range:–40 °C ~ 85 °C
Package size:(18.00±0.10) mm * (31.40±0.10) mm * (3.30±0.10) mm
Package included
1 x ESP32-WROVER IPEX Antenna Module
Weight | 0.016 kg |
---|
Customers Also Viewed
AMS1117-5.0V 5V DC-DC Step Down Power Supply Module Power Buck Board LDO 800MA
$2.94Power Supply ModuleAdd to cartFeature1. Input:DC 6V – 12V ( input voltage must be higher than the output voltage to 1V or more. )2. Output:5.0V (+-0.05v error ), 800mA ( load current must not exceed 800ma)3. Three pairs of panel design, layout nice ;4. Specially designed two pin mounting holes, can be directly fixed on hole board for extended …
AMS1117-5.0V 5V DC-DC Step Down Power Supply Module Power Buck Board LDO 800MARead More
10A 300W High Power DC-DC Step Down Power Module 24V 19V 12V 5V Adjustable Buck Board Converter
$39.35Power Supply ModuleAdd to cartSpecification1. Input voltage:DC 3.5~30V2. Output voltage:DC 0.8~29V3. Output current:10A (MAX)4. Conversion efficiency:92%5. Blue digital display, the static current is 2-8mA (depends on the tube status)6. Onboard voltmeter:It can display the input voltage and output voltage, pressing the button of bottom short press digital tube to switch. The IN LED light shows the input voltages, while …
60pcs 2W 22KR Metal Film Resistor Resistance 1% 22K ohm Resistor
$7.41Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionFive-color ringResistance:22k OhmAccuracy:+/- 1%Power:2WPackage included60 x 2W 22k Ohm Resistor
5pcs Hall Magnetic induction Sensor Magnetic Detection Magnetic Pole Resolver North and South Pole Detection Module DIY Kit
$16.88DIY Electronic KitsAdd to cartProduct parametersSize:33mm x 22mmOperating voltage:4.5V to 24V DCModule function:South and North poles distinguish, the South Pole is close to the bright blue light, and the North Pole is close to the bright red light.Maximum output load current:25MAOperating temperature range:-40 to 80 degrees Celsius.Detection distance:visually within 7MM, strong magnetic can reach 1.5CM.Interface definitionVCC:Positive power supplyGND:Negative power …
10pcs EQKIT OTL-1 Power Amplifier Circuit DIY Kit High Sensitivity OTL Discrete Component Amplifier Kit
$34.47DIY Electronic KitsAdd to cartDescriptionThis is a kit parts. You should solder it by yourself.This circuit belongs to the OTL circuit teaching model, its maximum power is only 1W, driven by two complementary transistors S8550 and S8050.It can be used for exercise welding techniques, understanding the triode complementary OTL output type and how to adjust the static operating point, …
YEABRICKS DIY LED Lighting Light Kit for Lego 10254 Christmas Holiday Car Building Blocks Lighting Accessories
$42.40DIY Electronic KitsAdd to cartSpecificationPlastic material:ABSPower supply:USBBlock net weight:0.07KGColor:As the picture shownThe product is just a light kit, not included the model!!!FitmentONLY For Lego 10254 Christmas Holiday Car Building Blocks Lighting AccessoriesPackage Included1 x LED Light Kit (Model Not Included)
LILYGO TTGO T5 V1.0 Wifi bluetooth Wireless Module Base ESP-32 ESP32 1.54 inch RBW Display
$45.91Display ScreenAdd to cartOverviewThis is an E-paper display module, resolution with embedded controller, communicating via SPI interface, supports more color display.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.Features· No backlight, keeps displaying last content …
LILYGO TTGO T5 V1.0 Wifi bluetooth Wireless Module Base ESP-32 ESP32 1.54 inch RBW DisplayRead More
Reviews
There are no reviews yet.