2000W High Power Soft Start Board 30A Dual Temperature Control Switch Delayed Start Board for Amplifier Amp DIY
$38.31
Type #1 / Type #2 / Type #3 / Type #4 / Type #5 / Type #6 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Type(option)
1:Terminal type Songchuan relay
2:Plug-in terminal type Songchuan relay
3:Plug-in terminal Songle relay
4:Terminal Type Songle Relay
5:Terminal type HF-105F-1 Relay
6:Plug-in terminal type HF-105F-1 Relay
Product description
Dual temperature control soft start uses high quality power module to replace traditional transformer, with low energy consumption, high efficiency, ultra stable, low heat, 105-235V wide voltage (for domestic and foreign), and so on!
This product PCB adopts 1.6MM thick double-sided fiberglass board, 2.0 oz copper thickness, tin-spraying process to ensure good passing of high current.
It is suitable for high-power amplifier and post-stage power supply as delay soft start board to avoid high current impact at the moment of booting and better protect your machine.
HF-105F-1 high current 30A power relay, stable and reliable performance, the maximum power can support 2000W.
Features
1. Delay start, the first relay is connected at the moment of power-on, and then the current is limited by the NTC thermistor. After a delay, the main relay is turned on to realize the soft-start function. Suppress the inrush current of the power amplifier, because the power of the class A and high power amplifier transformer is large, the load impedance is extremely low, and the capacity of the power supply filter capacitor is too large, resulting in excessive current of the power amplifier when the power is turned on, which easily damages the rectifier bridge and the damage filter capacitor.
2. 2 way overheat protection, use the attached 75 degree temperature control switch to install on the radiator,
When the temperature of the power amplifier board heat sink exceeds 75 degrees, the board can immediately cut off the power supply, and the power amplifier will not be overheated and burned. Until the temperature of the heat sink drops below 75 degrees, the power amplifier can be turned back on, otherwise the power amplifier can’t be turned on.
3. The power switch uses a tact switch, which is convenient and flexible. To prevent frequent machine damage to the machine.After the soft start is turned on, it takes about 12 seconds to shut down!
4. The input power supply voltage is between AC115V and AC230V.
Product parameters
Working voltage:220V
Maximum load:2000W
Control switch:light touch switch
Relay rated power:30A*2
PCB Size:9.8*8*2.2CM
Hole pitch size:7cm*8.6cm
Package included
1 x Switch Delayed Start Board
Weight | 0.1 kg |
---|
Customers Also Viewed
CP2102 USB To TTL/Serial Module Downloader
$10.11Converter BoardAdd to cartCJMCU CP2102 USB To TTL/Serial Module UART STC Downloader For Driver Installation Introduction:http://forum.hobbyant.com/forum-topic-56275.html Description CJMCU-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices. CJMCU-CP2102 works with other USB-UART adapter circuit similar to the driver through …
24x12x1 inch Aluminum Silicate High Temperature insulation Ceramic Fiber Blankets
$56.69FabricsFibers & TextilesAdd to cartDescription24x12x1 Inch Aluminum Silicate High Temperature Insulation Ceramic Fiber BlanketSpecificationMaterial:Aluminum SilicateSize:61x30x2.5cm / 24 x12 x1 inchClassification temperature:1260 ℃Long-term temperature:1100 ° CThermal conductivity:0.03Applications* Furnace, heating equipment, pipelines and other lining or wall lining insulation* Furnace door, lid, roof and other heat sealing* Chemical, electrical, high-rise building insulation fireFeatures* Seismic heat resistance* Low thermal conductivity and low …
24x12x1 inch Aluminum Silicate High Temperature insulation Ceramic Fiber BlanketsRead More
10pcs EQKIT AMP-1 TDA2822M Power Amplifier Amplify Module DIY Kit Electronic Production for Diy Kit Electronic PCB Board Module
$82.12DIY Electronic KitsAdd to cartDescriptionPackage Name:TDA2822M AmplifierKit Model:AMP-1Working voltage:DC4.5-9VPCB size:51*36mmSpeaker Size:50mmSpeaker Power:0.25WAMP-1 amplifier using TDA2822M acts as amplifier chip, this chip is STMicroelectronics (ST) developed dual-channel monolithic power amplifier IC, usually in the pocket cassette player (WALKMAN), tape recorders and multimedia speaker in for the audio amplifier. Has a simple circuit, good sound quality, wide voltage range and other …
5Pcs PS2 Game Joystick Switch Sensor Module
$10.92Sensor & Detector ModuleAdd to cart5Pcs PS2 Game Joystick Module For Description This is PS2 game joystick module for Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin. …
100W Outdoor Sunpower Foldable Solar Panels Cells Waterproof Fast Charger Solar Panel
$97.19Solar PanelAdd to cartFeatures1. High efficiency, fast charging.2. Small size, super thin, waterproof, easy to operate, wide range of application3. Easy to carry, with a handle.4. It is more than 5% higher than ordinary efficiency.5. Solar energy conversion efficiency:25%Specifications–Output voltage:USB5V + DC18V–Output current:20A, 5.5A–Color:Black–Solar panel type:Monocrystalline silicon–Conversion efficiency:>25%–Output interface:USB–Open Size:680mmx305mm/26.7inx12in–Folding size:170mmx305mm/6.7inx12inPackage Included–1X Soalr Panel–2X Carabiner–1X USB cable
Reviews
There are no reviews yet.