2000W High Power Soft Start Board 30A Dual Temperature Control Switch Delayed Start Board for Amplifier Amp DIY
$38.31
Type #1 / Type #2 / Type #3 / Type #4 / Type #5 / Type #6 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Type(option)
1:Terminal type Songchuan relay
2:Plug-in terminal type Songchuan relay
3:Plug-in terminal Songle relay
4:Terminal Type Songle Relay
5:Terminal type HF-105F-1 Relay
6:Plug-in terminal type HF-105F-1 Relay
Product description
Dual temperature control soft start uses high quality power module to replace traditional transformer, with low energy consumption, high efficiency, ultra stable, low heat, 105-235V wide voltage (for domestic and foreign), and so on!
This product PCB adopts 1.6MM thick double-sided fiberglass board, 2.0 oz copper thickness, tin-spraying process to ensure good passing of high current.
It is suitable for high-power amplifier and post-stage power supply as delay soft start board to avoid high current impact at the moment of booting and better protect your machine.
HF-105F-1 high current 30A power relay, stable and reliable performance, the maximum power can support 2000W.
Features
1. Delay start, the first relay is connected at the moment of power-on, and then the current is limited by the NTC thermistor. After a delay, the main relay is turned on to realize the soft-start function. Suppress the inrush current of the power amplifier, because the power of the class A and high power amplifier transformer is large, the load impedance is extremely low, and the capacity of the power supply filter capacitor is too large, resulting in excessive current of the power amplifier when the power is turned on, which easily damages the rectifier bridge and the damage filter capacitor.
2. 2 way overheat protection, use the attached 75 degree temperature control switch to install on the radiator,
When the temperature of the power amplifier board heat sink exceeds 75 degrees, the board can immediately cut off the power supply, and the power amplifier will not be overheated and burned. Until the temperature of the heat sink drops below 75 degrees, the power amplifier can be turned back on, otherwise the power amplifier can’t be turned on.
3. The power switch uses a tact switch, which is convenient and flexible. To prevent frequent machine damage to the machine.After the soft start is turned on, it takes about 12 seconds to shut down!
4. The input power supply voltage is between AC115V and AC230V.
Product parameters
Working voltage:220V
Maximum load:2000W
Control switch:light touch switch
Relay rated power:30A*2
PCB Size:9.8*8*2.2CM
Hole pitch size:7cm*8.6cm
Package included
1 x Switch Delayed Start Board
Weight | 0.1 kg |
---|
Customers Also Viewed
500pcs 0805 (2012) SMD White LED Chip Surface Mount SMT Beads Ultra Bright Light Emitting Diode LED Lamp Electronics Components
$26.89Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionQuantity:500 pieces Size:2.0 x 1.2 (mm) / 0.08 x 0.05 (inch)Emitting Color:White (6000K-9000K)Luminous Intensity:180-210mcdViewing Angle:120 DegreeForward Voltage / Current:3V-3.2V | 20mAPolarity:Refer to the Arrow on the Reverse SidePackage included500 x 0805 (2012) …
5pcs AC 100-240V to DC 12V 5A 60W Switching Power Supply Module Driver Adapter LED Strip Light
$52.97Power Supply ModuleAdd to cartFeatures1. Good anti-interference performance and high reliability.2. Low operating temperature and long service life.3. Wide input voltage range, (100-240V) in line with global usage standards.4. Good insulation performance and high electric strength.5. Full load high temperature burning machine, 100% aging test.SpecificationsModel:HS-60-12DC output voltage:12VOutput voltage tolerance:±1%Rated output current:5AOutput current range:0 – 5ARipple and noise:100mVp-pLine stability:±0.5%Load stability:±0.5%DC …
4Pcs 5mm Reusable Clear Bent Glass Drinking Straws Water Juice Straws with Cleaning Brush
$22.26Bottles & JarsAdd to cartSpecificationColor:ClearMaterial:High Borosilicate GlassTube Mouth Shape:RoundTemperature Resistance:-20~450℃Total Length:21.5cm / 8.46inchInner Diameter:0.5cmFeatures– Non-toxic environmentally friendly green borosilicate heat-resistant material, safe to use, not stain, will not fade.– Widely used, can drink water, milk, juice, coffee, coke, soda, etc.– Could put it into the microwave for sterilization.Package Included4 x Glass Drinking Straws1 x Cleaning Brush
5Pcs Car Window Sun Visor Screen Car Side Rear Window Screen Sunshade Shield Curtain
$19.83Mesh & Wire ClothAdd to cartDescriptions5Pcs Car Window Sun Visor Screen Car Side Rear Window Screen Sunshade Shield CurtainSpecificationsSizeRear Sun Visor:50 * 100 CmThe Front Side Of The Sun Visor:36 * 44 CmThe Back Side Of The Sun Visor:36 * 44 CmMaterial:3D Photocatalyst MeshWeight:Approx.60 gFeatures– Convenient to use and take down with two suckers.– Can reflect 90% direct sunlight and …
5Pcs Car Window Sun Visor Screen Car Side Rear Window Screen Sunshade Shield CurtainRead More
5Pcs Micro USB TP4056 Charge And Discharge Protection Module Over Current Over Voltage Protection
$9.32Battery Protection ModuleAdd to cartCharacteristicOn-board TP4056 lithium battery charging management chipOn-board micro USB head, can be directly connected with most of the smart phone charger as the input side to the lithium battery chargingReserved IN+ and IN- input port, convenient user DIYOn-board charging status indicatorSupport charge discharge over current protectionChip with constant current and constant pressure, full automatic stopSupports …
Keyes Brick TEMT6000 Light Sensor(Pad hole) Analog Signal Module with Pin Header Version
$6.10Sensor & Detector ModuleAdd to cartDescriptionThis is a commonly used TEMT6000 light sensor which mainly uses TEMT6000X01 components. The component is a highly sensitive visible light sensitive (NPN) transistor. The sensor can magnify the change of the tiny light rays captured about 100 times, and is easily recognized by the microcontroller for AD conversion. Its response to visible light illumination …
Keyes Brick TEMT6000 Light Sensor(Pad hole) Analog Signal Module with Pin Header VersionRead More
100W18V Foldable Portable Monocrystalline Solar Panel with 5V USB Port
$301.75Smart Robot & Solar PanelAdd to cartFeatures– The outermost layer of the product is made of thick and breathable nylon bag. It`s easy to carry and portable coz it`s folable and has a handle, which is suitable for camping, hiking, hiking, and can be used as a backup power source for mobile phones and car batteries.– It`s equipped a USB&DC junction …
100W18V Foldable Portable Monocrystalline Solar Panel with 5V USB PortRead More
GY-213V-HDC1080 High Accuracy Digital Humidity Sensor with Temperature Sensor
$15.30Sensor & Detector ModuleAdd to cartDescriptionThe HDC1080 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The HDC1080 operates over a wide supply range, and is a low cost, low power alternative to competitive solutions in a wide range of common applications. The humidity and temperature sensors are factory calibrated.FeaturesRelative Humidity …
GY-213V-HDC1080 High Accuracy Digital Humidity Sensor with Temperature SensorRead More
Reviews
There are no reviews yet.