2000W High Power Soft Start Board 30A Dual Temperature Control Switch Delayed Start Board for Amplifier Amp DIY
$38.31
Type #1 / Type #2 / Type #3 / Type #4 / Type #5 / Type #6 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Type(option)
1:Terminal type Songchuan relay
2:Plug-in terminal type Songchuan relay
3:Plug-in terminal Songle relay
4:Terminal Type Songle Relay
5:Terminal type HF-105F-1 Relay
6:Plug-in terminal type HF-105F-1 Relay
Product description
Dual temperature control soft start uses high quality power module to replace traditional transformer, with low energy consumption, high efficiency, ultra stable, low heat, 105-235V wide voltage (for domestic and foreign), and so on!
This product PCB adopts 1.6MM thick double-sided fiberglass board, 2.0 oz copper thickness, tin-spraying process to ensure good passing of high current.
It is suitable for high-power amplifier and post-stage power supply as delay soft start board to avoid high current impact at the moment of booting and better protect your machine.
HF-105F-1 high current 30A power relay, stable and reliable performance, the maximum power can support 2000W.
Features
1. Delay start, the first relay is connected at the moment of power-on, and then the current is limited by the NTC thermistor. After a delay, the main relay is turned on to realize the soft-start function. Suppress the inrush current of the power amplifier, because the power of the class A and high power amplifier transformer is large, the load impedance is extremely low, and the capacity of the power supply filter capacitor is too large, resulting in excessive current of the power amplifier when the power is turned on, which easily damages the rectifier bridge and the damage filter capacitor.
2. 2 way overheat protection, use the attached 75 degree temperature control switch to install on the radiator,
When the temperature of the power amplifier board heat sink exceeds 75 degrees, the board can immediately cut off the power supply, and the power amplifier will not be overheated and burned. Until the temperature of the heat sink drops below 75 degrees, the power amplifier can be turned back on, otherwise the power amplifier can’t be turned on.
3. The power switch uses a tact switch, which is convenient and flexible. To prevent frequent machine damage to the machine.After the soft start is turned on, it takes about 12 seconds to shut down!
4. The input power supply voltage is between AC115V and AC230V.
Product parameters
Working voltage:220V
Maximum load:2000W
Control switch:light touch switch
Relay rated power:30A*2
PCB Size:9.8*8*2.2CM
Hole pitch size:7cm*8.6cm
Package included
1 x Switch Delayed Start Board
Weight | 0.1 kg |
---|
Customers Also Viewed
700W 5 Nylon Fiber Blades Wind Turbine Power Generator DC 24V Safe Aerogenerator
$1,101.59Alternative Energy GeneratorsAdd to cartFeaturesStarting wind speed is low, high wind energy utilization, small size, good looks, low operating vibration.User-friendly design:convenient equipment installation, maintenance and repair.Using high-power tracking intelligent microprocessor control, effective regulation of current and voltage.The shell is made of aluminum alloy die-casting, with double bearing carrier, strong anti-typhoon capacity, safe and reliable operation.The wind wheel and blade …
700W 5 Nylon Fiber Blades Wind Turbine Power Generator DC 24V Safe AerogeneratorRead More
10PCS 6PCS 6V 100mA 0.6W Polycrystalline Mini Epoxy Photovoltaic Solar Panel
$39.69Smart Robot & Solar PanelAdd to cartOn the use and testing ofProducts can only be in the sun, the nominal peak power is the midday sun, the sun early in the morning one night and not the strong sun is not up to the nominal, buyers pay attention to this point and in the light! inside the room, the solar panels …
10PCS 6PCS 6V 100mA 0.6W Polycrystalline Mini Epoxy Photovoltaic Solar PanelRead More
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V To 5V DC-DC Boost Converter Module Board
$6.55Power Supply ModuleAdd to cartFeatureInput voltage 0.9-5V; output voltage 5VMaximum output current:480MaStarting voltage 0.8V, output current 7MAInput 1-1.5V, output 5V 40-100MAInput 1.5-2V, output 5V 100-150MAInput 2-3V, output 5V 150-380MAInput more than 3V, output 380-480MAOperating frequency:150KHZTypical conversion efficiency:85%Pin 2.54MM spacingSize:11mm x 10.5mm x 7.5mm (very small)Weight:about 1 gNote1. the input voltage is not greater than the nominal voltage, otherwise it …
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V To 5V DC-DC Boost Converter Module BoardRead More
AC 80-300V 3in1 LCD Time Voltage Frequency Combo Meter for Generator
$25.31Module ComponentsAdd to cartDescriptionAC 80-300V/30-70HZ 3in1 LCD Time Voltage Frequency Combo Meter For GeneratorVoltage and frequency can easily determine accurate display.Equipment long life, with power outage to save the cumulative time, can be stored for up to 20 years.SpecificationResolution:1VDisplay mode:LCDResolution:0.1hzWorking voltage:single phase:AC 80-300VFrequency measurement range:30-70HzWorking conditions temperature:-20 – 70→Working life:More than two yearsApplicationVoltage monitor, Generator Sets, industrial control …
AC 80-300V 3in1 LCD Time Voltage Frequency Combo Meter for GeneratorRead More
LCR-T4 Transparent Plastic Shell Clear Protective Case for Graphical Transistor LCR Tester Multifunctional Transistor Tester
$7.01Module ComponentsAdd to cartFeatureNet weight:93.6gSize:11.3*8.7*1.7cmNote:For LCR-T4 Graphical Transistor LCR Tester only (Product ID:1311439)The Tester is not includes.Package includes1 x LCR-T4 Transparent Plastic Shell kit
Reviews
There are no reviews yet.