12V 150PSI 20L/min LCD Portable Tyre inflator Cordless Rechargeable Digital Car Tyre Compressor Pump w/ LED Light
$87.06
Color. Silver / Color. Blue / Color. Green / Color. Black /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Tyre Inflator Cordless Portable Compressor Digital Car Tyre Pump, Preset Pressure 12V 150PSI 20L/min Rechargeable Air Pump for Car Bicycle Tires Balls Swimming Rings Toys, with LED Light and LCD Display
Features
[High Capacity Rechargeable Battery]This portable compressor’s certificated lithium-ion battery and USB charging port support quick charging.
[Two Charging Modes] USB2.0 / USB3.0 charging cables and car cigarete lighter plug cables could be used to quickly charge the product.
[Fast Auto-Inflation]The tyre inflator has 4 switchable pressure units (PSI, BAR, KPA, KG/CM2) so that you can preset the tire pressure as you want. The tyre pump would automatically turn off when reaching the preset tire pressure. The inflator has a maximum inflatable pressure of 150PSI.
[Multifunction]With cordless portable design, pump allows to reach all tyres of your bicycles, motorcycles, cars (including SUVs). Also equipped with 3 nozzle adaptors for mattresses/airboat/toys/sports ball/ inflatables.
[Cordless Portable Design]This tyre inflator’s cordless design and compact mini size make it portable and simple to operate with one hand. You only need 4 steps to start inflating. The LCD screen shows the real-time pressure on the side so you could monitor the pressure without bending to see the bottom.
[Night Use]6 LED Highlight COB lights automatically illuminate when inflating. With LED Lights in the bottom and LCD real-time pressure display on the side, you could conveniently use the digital inflator as a tyre pressure gauge and inflator in the dark.
Specification
Battery capacity:2000mAh
Maximum continuous working time:30~40min
Inflation efficiency:20L/min
Max Inflation pressure:150PSI / 10.3BAR / 990KPA / 10.5KG/CM
Pressure units:PSI, BAR, KPA, KG/CM2
Working temperature:- 20°C~ + 70°C
Working Power:60W
Input Voltage:DC 12V (car charger), DC 5 – 15V (USB cable)
Working current:1~5A
Floodlight:80Lumens
Weight:550g
Product size:220x56x46.5mm/8.7×2.2×1.8
Outer air hose length:13cm /5.1 inch
Operation Steps
1.Connect the hose into the bottom tire valve core.
2.Press down the buckle on the air hose to prevent air leaking.
3.Press the button ‘Unit’ to wake up the LCD screen.
4.Press the button ‘+’ and ‘-‘ to preset tire pressure.
5.Press the power button to start inflating, it will stop automatically when the preset pressure is reached.
Package Including
1* Digital display rechargeable pump
1* French conversion valve
1* Plastic gas nozzle
1* Ball needle
1* T Inflatable tube
1* Micro USB cable
Weight | 0.5 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.