20A 12V LED Toggle Switch on/off Rocker Switch LED Light Bar Switch
$24.29
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Toggle Switch On/Off Rocker Switch LED Light Bar For UTVs Boats Can Am Polaris
Feature
1. 20 Amp 12 Volt ON-OFF Rocker Switch.
2. Laser etched with two L.E.D. Lights.
3. Single pole single throw ON-OFF switch.
4. This is the standard size of most switch holes in modern vehicles.
5. Upper light is ON when the switch is pressed UP.
6. Lower LED is independent and can be wired to separate dash light circuit.
7. Both LEDs have separate grounds.
8. No rear barriers between terminals.
9. Lower light Waterproof rating of IP66.
Specification
-Manufacturer Part Number:FTVSW009
-Placement on Vehicle:Front
-Surface Color:Black
-Light Color:White
-Surface size:2inch (50mm) x 1inch (25mm)
-Standard size mounting hole 1.41inch (36mm) x .86inch (22mm).
FITMENT
2011-2017 Can-Am Commander 1000
2011-2015 Can-Am Commander 800
2013-2015 Can-Am Commander Electric
2014-2017 Can-Am Commander Max 1000
2016-2017 Can-Am Commander Max 800R
2013-2017 Can-Am Maverick 1000R
2013-2017 Can-Am Maverick Max 1000R
2012-2017 Can-Am Outlander 1000
2016-2017 Can-Am Outlander 1000R
2007-2014 Can-Am Outlander 400
2010-2016 Polaris Ranger 800
2011-2014 Polaris Ranger 900
2009-2016 Polaris RZR 170
2014-2016 Polaris RZR 4 900
2008-2014 Polaris RZR 800
2014-2016 Polaris RZR 900
2009-2014 Polaris RZR S 800
2014-2016 Polaris RZR XP 1000
2014,2016 Polaris RZR XP 4 1000
2011-2013 Polaris RZR XP 900
2013 Can-Am Maverick 1000
2015 Polaris RZR 4 XP 1000
2012 Polaris RZR 4 XP 900
2009 Polaris RZR S
2016 Polaris RZR S 1000
2011 Polaris RZR SW 800
2016 Polaris RZR XP
2016 Polaris RZR XP 4
2013 Polaris RZR XP 4 900
2011-2013,2016-2017 Can-Am Commander 800R
2010-2011,2013-2014 Polaris RZR 4 800
2012-2013,2015-2016 Polaris RZR 570
UTVs, Boats, Cars, Trucks, Machines, Tractors, Heavy Equipment, Can Am Maverick Commander
Package Included
1x LED Toggle Switch
Weight | 0.026 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.