5pcs 2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$32.75
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
TY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the latched or non-latched mode. There are 6 input ports for transmission, corresponding to the 6 output ports received, which can be extended to 64 channels. The 6 channels can work independently or at the same time without interference. The module adopts the learning code mode and the module has a single ID number. A remote controller can arbitrarily learn the ID address and data channel of a receiving module. The receiving module has a learning and prohibiting learning function to prevent illegal learning of the same type of remote controller, and the application security level is high. The module is small in size, low in power consumption, and easy to use. The transmitter module only needs to design a button board according to the remote control shell. The receiving module has no peripheral parts, and does not need any programming. The coding chip is very convenient and simple to use, and multiple sets of products can be simultaneously Use without interfering with each other, effectively solve the problem that 315/433M remote control products cannot be launched at the same time.
RX mode conversion function
Latch mode:RX output port is normally 0 level state, press the button once, receive the output high level and latch, press the button again, the receiving output becomes 0 level, the B8 port needs to be connected to GND.
Non-latching mode:Press and hold the transmit button, receive the output high level, release the button, and receive 0 level. The B8 port needs to be connected to VDD.
Pair code and disable code function
TX and RX must be used for the code. RX can only identify the TX with successful code. After the code is successful, the B7 code port must be disconnected (floating) to prohibit other TX pairs, preventing other remote controllers from illegally controlling the code. Your receiving device. The receiving pair code port does not limit the number of pairs of the remote controller (multiple send 1 version) in the allowable code status, allowing several remote control code to be determined by the owner. If the receiving module (RX) is replaced after the code is coded, the original remote control (TX) needs to be re-coded. The remote control can only control its own receiving device. If a remote controller and its receiving device are paired with the code, then learn the other. Receiving the device and learning successfully, the receiving device will no longer receive the information of the remote controller and automatically clear the remote controller. If you need to use this remote control, you need to re-receive the device pair code. The password is a unique 32-bit address that is sent to the other party when the code is paired. Each transmission or reception can only store a unique password. If the code is re-coded, the original password will be cleared.
Package included
5 x TY24D-TX Module
5 x TY24D-RX Module
Weight | 0.02 kg |
---|
Customers Also Viewed
Keyes ESP32-WROOM-32 Module Core Board ESP32 ESP-32 bluetooth and WIFI MCU
$16.19Smart ModuleAdd to cartDescriptionThis keyestudio ESP32 core board is a Mini development board based on the ESP-WROOM-32 module.The board has brought out most I/O ports to pin headers of 2.54mm pitch. These provide an easy way of connecting peripherals according to your own needs.When it comes to developing and debugging with the development board, the both side standard …
Keyes ESP32-WROOM-32 Module Core Board ESP32 ESP-32 bluetooth and WIFI MCURead More
5pcs 3S String 25A 11.1V 12V 14.8V 16.8V 18650 Lithium Battery Overcharge and Over Discharge Protection Board
$23.73Other Module BoardAdd to cartNote1. Lithium battery protection board can not be used for lithium iron phosphate battery, xenon lamp, hand drill battery pack, electric fish battery pack, electric bicycle battery pack, children’s car battery, 550 or more power type motor, 1W fisheye LED lamp.2. For discharge products above 3A, the discharge rate of the battery should be more …
Geekcreit OpenMV3 Cam M7 Smart Camera Image Processing Color Recognition Sensor Module Visual inspection Line
$87.47Sensor & Detector ModuleAdd to cartDescriptionThe OpenMV Cam is a small, low power, microcontroller board which allows you to easily implement applications using machine vision in the real-world. You program the OpenMV Cam in high level Python scripts (courtesy of the MicroPython Operating System) instead of C/C++. This makes it easier to deal with the complex outputs of machine vision …
50pcs 3V 650nM 5mW Line Laser Diode Module
$138.98Module ComponentsAdd to cartDescriptionSpot mode:line(Continuous output)Dimensions:diameter 9mm x length 23mmLaser working life:5000-10000 hours or moreLaser wavelength:650nmOutput power:5mWOperating voltage:DC3VWorking current:16mA ~ 20mAWorking temperature:-36 → ~ 65 →Storage temperature:-36 → ~ 65 →Level:sub-industrial gradeColor:red lightMaterial:brassApplication(1) industrial grade:can be used for equipment, health care, military, Kam pseudo security, stage lighting, tools, U disk, mobile phone, projection teaching flip pen, warm measuring …
3pcs DC-DC 2 in 1 6.5V-40V To 5V Buck Step Down Power Module Volt Meterr Automatic Calibration
$15.63Power Supply ModuleAdd to cartSpecifications1. Ultra wide voltmeter range:DC 4.5-40V2. 5V / 2A output current capacity (when the input voltage is at 6.5~40V, can stabilize to output 5.0V voltage)3. One key (inchoutput enableinch button) switch USB output, one key (“low power Inchbutton) into ultra-low power consumption4. Voltmeter can be self calibration, there will never be inaccurate voltmeter problems!!5. Reverse …
DC5-30V 5A 150W LED Dimming Module PWM DC Motor Speed Controller Digital Display Encoder Cuty Cycle Frequency
$13.76Electronic Accessories & SuppliesAdd to cartDescriptionComes with start and stop buttons, and can be controlled by external switches to meet customers’ various control needsSoft start function of the motor, the current will increase slowly when starting the motor, no impact current, effectively protect the motor and extend the service life of the motorYou can set the duty cycle, the upper …
Reviews
There are no reviews yet.