5pcs 2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$32.75
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
TY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the latched or non-latched mode. There are 6 input ports for transmission, corresponding to the 6 output ports received, which can be extended to 64 channels. The 6 channels can work independently or at the same time without interference. The module adopts the learning code mode and the module has a single ID number. A remote controller can arbitrarily learn the ID address and data channel of a receiving module. The receiving module has a learning and prohibiting learning function to prevent illegal learning of the same type of remote controller, and the application security level is high. The module is small in size, low in power consumption, and easy to use. The transmitter module only needs to design a button board according to the remote control shell. The receiving module has no peripheral parts, and does not need any programming. The coding chip is very convenient and simple to use, and multiple sets of products can be simultaneously Use without interfering with each other, effectively solve the problem that 315/433M remote control products cannot be launched at the same time.
RX mode conversion function
Latch mode:RX output port is normally 0 level state, press the button once, receive the output high level and latch, press the button again, the receiving output becomes 0 level, the B8 port needs to be connected to GND.
Non-latching mode:Press and hold the transmit button, receive the output high level, release the button, and receive 0 level. The B8 port needs to be connected to VDD.
Pair code and disable code function
TX and RX must be used for the code. RX can only identify the TX with successful code. After the code is successful, the B7 code port must be disconnected (floating) to prohibit other TX pairs, preventing other remote controllers from illegally controlling the code. Your receiving device. The receiving pair code port does not limit the number of pairs of the remote controller (multiple send 1 version) in the allowable code status, allowing several remote control code to be determined by the owner. If the receiving module (RX) is replaced after the code is coded, the original remote control (TX) needs to be re-coded. The remote control can only control its own receiving device. If a remote controller and its receiving device are paired with the code, then learn the other. Receiving the device and learning successfully, the receiving device will no longer receive the information of the remote controller and automatically clear the remote controller. If you need to use this remote control, you need to re-receive the device pair code. The password is a unique 32-bit address that is sent to the other party when the code is paired. Each transmission or reception can only store a unique password. If the code is re-coded, the original password will be cleared.
Package included
5 x TY24D-TX Module
5 x TY24D-RX Module
Weight | 0.02 kg |
---|
Customers Also Viewed
5pcs XH-M172 intermittent Working Module 0-999 Minutes Timing Working Module Output Switch Control Board
$41.46Power Supply ModuleAdd to cartFeatureProduct Name:Intermittent working moduleProduct model:XH-M172Input voltage:DC12VOutput type:relay output 10AService life:more than 100,000 timesWorking temperature:-30~60 degreesSetting range:1-999 minutesProduct size:53 x 35 x 16mmPackage includes5 x Intermittent working module
3 Axis GRBL USB Driver offline Controller Control Module LCD Screen SD Card for CNC 1610 2418 3018 Wood Router Laser Engraving Machine
$38.46Engraving Parts & AccessoriesAdd to cartDescriptionThis offline controller is designed for the use of Mini CNC router 1610/2418/3018 and even with more advanced function of tool set, limit switch supportive, Laser supportive; Offline and Bluetooth supportive.SpecificationFirmware:GRBL 08, 09, 1.1and so onInput Voltage:DC 7V- 36VApplicable CNC Router:3 Axis CNC router 1610; 2418; 3018Features1. Support GRBL and benbox firmware.Support CNC 3-axis laser …
Single Chip Microcomputer DC Motor Control Module L6201 Driver Module
$14.49Other Module BoardAdd to cartDescription The dc motor drive module is the L6201 chip drive module.L6201 is full control bridge drive chip ,which adopting multi sourcing technology BCD (Bipolar, CMOS, DMOS) to control motor. This chip can integrate independent DMOS field-effect transistors with CMOS and diodes on a single chip.L6201 can realize the optimization of logic circuits and power …
Single Chip Microcomputer DC Motor Control Module L6201 Driver ModuleRead More
ESP32S ESP32 0.5A Micro USB Charger Board 18650 Battery Charging Shield without Battery
$10.92Expansion Board & ShieldAdd to cartSpecifications Input port:Micro USB USB output type:Type-A 0.5A current charging 1 switch control USB output Input Voltage:5~8V Output:3V & 1A (x3)and 5V & 4A (x3) LED indicate:Green means full,Red means charging Size:9.8×2.9cm Note Be careful of inch+inch and inch-inch, You should follow the direction of inch+inchinch-inch on the PCB.If you put wrong direction, charging chip …
ESP32S ESP32 0.5A Micro USB Charger Board 18650 Battery Charging Shield without BatteryRead More
Red Laser Dot Sight Scope 20mm Picatinny Rail with 25mm Flashlight Ring Mount Clamp Holder
$26.31Laser SightAdd to cartNotice (Please read this first)1. This item runs on 3pcs AG13 / LR44 Batteries which are Not Included. You need to buy them at your Local Shop. Hope you consider it before order.2. Besides, The laser light image shown here is for reference only. In actual use, the laser light beam is INVISIBLE and it …
Red Laser Dot Sight Scope 20mm Picatinny Rail with 25mm Flashlight Ring Mount Clamp HolderRead More
Reviews
There are no reviews yet.