5pcs 2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$32.75
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
TY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the latched or non-latched mode. There are 6 input ports for transmission, corresponding to the 6 output ports received, which can be extended to 64 channels. The 6 channels can work independently or at the same time without interference. The module adopts the learning code mode and the module has a single ID number. A remote controller can arbitrarily learn the ID address and data channel of a receiving module. The receiving module has a learning and prohibiting learning function to prevent illegal learning of the same type of remote controller, and the application security level is high. The module is small in size, low in power consumption, and easy to use. The transmitter module only needs to design a button board according to the remote control shell. The receiving module has no peripheral parts, and does not need any programming. The coding chip is very convenient and simple to use, and multiple sets of products can be simultaneously Use without interfering with each other, effectively solve the problem that 315/433M remote control products cannot be launched at the same time.
RX mode conversion function
Latch mode:RX output port is normally 0 level state, press the button once, receive the output high level and latch, press the button again, the receiving output becomes 0 level, the B8 port needs to be connected to GND.
Non-latching mode:Press and hold the transmit button, receive the output high level, release the button, and receive 0 level. The B8 port needs to be connected to VDD.
Pair code and disable code function
TX and RX must be used for the code. RX can only identify the TX with successful code. After the code is successful, the B7 code port must be disconnected (floating) to prohibit other TX pairs, preventing other remote controllers from illegally controlling the code. Your receiving device. The receiving pair code port does not limit the number of pairs of the remote controller (multiple send 1 version) in the allowable code status, allowing several remote control code to be determined by the owner. If the receiving module (RX) is replaced after the code is coded, the original remote control (TX) needs to be re-coded. The remote control can only control its own receiving device. If a remote controller and its receiving device are paired with the code, then learn the other. Receiving the device and learning successfully, the receiving device will no longer receive the information of the remote controller and automatically clear the remote controller. If you need to use this remote control, you need to re-receive the device pair code. The password is a unique 32-bit address that is sent to the other party when the code is paired. Each transmission or reception can only store a unique password. If the code is re-coded, the original password will be cleared.
Package included
5 x TY24D-TX Module
5 x TY24D-RX Module
Weight | 0.02 kg |
---|
Customers Also Viewed
3Pcs NodeMcu Lua WIFI internet Things Development Board Based ESP8266 CP2102 Wireless Module
$33.62Smart ModuleAdd to cartDescriptionMaterial:Experimental Board + Mixed AlloyColor:BlackChip Module:CP2102Working Temperature:-40 → ~ +125 →Power Input:4.5V ~ 9V (10VMAX), USB-poweredDrive Type:Dual high-power H-bridge driverCurrent:continuous transmission ≈70mA (200mA MAX)StandbySize:(L)X(W)4.8X2.5cm/1.89inchX0.98inch(appr.)FeaturesA great set of tools to develop ESP8266.ESP8266 has IO Pin.ESP8266 full IO mouth leads directly download without resetting.Open-source, interactive, programmable, low cost, simple, smart, WI-FI enabled.Greatly speed up your IOT application …
3pcs 500W Thyristor Electronic Regulator Accessaries Dimming Speed Regulation with Switch Temperature Adjustment Knob Module
$13.41Motor PWM Speed ControllerAdd to cartSpecificationsPCB board size:3.2CM*3.3CMRated power:P=UI; 500W=220V*2.27AModel:500W dimming governor;Rated power:500W;Suitable for dimming speed control of AC motors, lamps, etc. above 100W and below 500W;NoteThis module is connected to the AC voltage of 220V, so be sure to pay attention to safety when debugging, to prevent the occurrence of electric shock accidents, the store is not responsible for …
2 in 1 Folding Digital LCD Angle Finder Ruler Stainless Steel Ruler 360 Degree Protractor
$42.51Laboratory Thermostatic DevicesAdd to cartSpecificationsMaterial:Stainless Steel + PlasticSize Range:0-300mmMeasuring Range:0-360°Resolution:0.05°Accuracy:±0.3°Repeatability:0.05°Battery:1 * 3V CR2032 Lithium Battery (Built-in)Features ACCURATE & Fast:Calculating angles quickly and accurately, digital display clearly TWO SCALE DISPLAY:Both measure the angle and length, metric and imperial scale 360° MEASUREMENT RANGE:Stable locking function can lock the measurement at any angle INTELLIGENT & SAVE POWER:Automatically shut down after 6 minutes …
2 in 1 Folding Digital LCD Angle Finder Ruler Stainless Steel Ruler 360 Degree ProtractorRead More
WangDaTao TEA5767 Radio DIY Kit FM Digital Radio Electronic DIY Soldering Kit
$43.73DIY Electronic KitsAdd to cartDescriptionCircuit board size:7.7CMX6.1CM;Shell size:8.4cm*7.6CM*5.5CMWorking voltage:DC 5V (positive inside DC seat)Frequency modulation range:87MHZ-108MHZ;FM button:press the button once to 0.1MHZ, long press the FM button to continuously add and subtract;Weight:265GFunction:digital display frequency function, power off memory function, power saving function;Power-off memory function:After turning off the power, power on again to play the radio station before the power-off.Power …
WangDaTao TEA5767 Radio DIY Kit FM Digital Radio Electronic DIY Soldering KitRead More
LILYGO TTGO T-Watch Sensor Development Kit STEM Programming Educational Sensor Module Multiple Function Sensor
$216.66Smart ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.More informationhttps://t-watch-document-en.readthedocs.io/en/latest/introduction/index.htmlhttps://github.com/Xinyuan-LilyGO/TTGO_TWatch_LibraryHardware SpecificationsChipset:ESP32, dual-core MCU, PMU power managementFLASH:QSPI flash 16MB / PSRAM 8MBSRAM:520 kB SRAMButton:power key, IO36Extended function:Reference enhanced version and sensor kitUSB to TTL:CP2104Modular interface:UART, SPI, SDIO, I2C, LED PWM, PWM, …
CCM5D DC 6V-30V 6A DC Motor Speed Controller LED Display PWM Variable Speed Regulator with Shell
$17.48Motor PWM Speed ControllerAdd to cartFeatures• CCM5D DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). • Large 0.56 inch 3-digit LED display numbers allow viewing under the most adverse conditions.• The display range of 3-digit LED display is “000 Inch-“100 Inch. ( For example, displayed “60 Inch, it means that the PWM output …
Clear BorosilicateGlass Pipe Detachable Glass Pipe Bottle Glassware
$73.55Laboratory BottleAdd to cartDescriptionTransparent Detachable Pipe Bottle for Eliminating Unwanted Odors and HarmSpecificationColor:ClearJoint Diameter:14 mmHeight:355 mm/14inchMaterial:High Borosilicate GlassFeatures1. Convenient to carry.2. Attractive appearance.3. Reusable and easy to clean.4. Help eliminate unwanted odors from your finger tips.5. Made from borosilicate glass for the smoking experience.6. Allow you to enjoy the full flavor of your smoke while reducing the tar …
Clear BorosilicateGlass Pipe Detachable Glass Pipe Bottle GlasswareRead More
Reviews
There are no reviews yet.