Portable USB Rechargeable Battery Charger Fast Charging for AA 18350 18500 18650
$16.19
Type Seven Light Colors with Remote / Type D / Type E / Type F / Type C / Type B /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
There are 6 types of charger to choice:C1, C2, Q1 PLUS, Q2 PLUS, Q4, D4 with LCD
Suitable Battery:1. 3.6V / 3.7V Li-ion (10400/14500/14650/16340(RCR123)/18350/18500/
18490/18650/20700/21700/22650/26650/26700)
2. 1.2V Ni-mh/Nickel-cadmium Battery ( / AAA / AA / A / SC / C / F6)
Type A:C1
Input:5V/2A
Output:5V/0.8A
Charging Current:0.8A
Type B:C2
Input:5V/2A
Output:5V/1.6A(Each Channel:0.8A)
Charging Current:0.8A
Size:105x29x25mm
Type C:Q1 PIUS
Input:5V 2A
Output:4.2V/0.5A 4.2/1A 4.2/2A 1.48V/0.5A(NIMH)
USB Output:5V1A
Type D:Q2 Plus
Input:5V 2A
Output:4.2/1A 4.2/2A 1.48V/0.5A(NIMH)
Charging Current:2A
Type E:Q4
Input:5V 2A
Output:4.2V/2A 4.2V/1A 4.2V/0.5A 1.48V/0.5A
Charging Current:2A
Type F:D4 with LCD
Input:5V 2A
Output:4.2V/2A 4.2V/1A 4.2V/0.5A 1.48V/0.5A
Charging Current:2A
Features
– Made of the quality material, it is durable and wear-resistant.
– Automatic identification and conversion can be used for self-stop charging of AA/AAA rechargeable batteries.
– Current, Vmax detection, full self-stop display, protect the battery.
– 2V fast charging reduces charging time in half.
– Automatic detection of non-rechargeable batteries.
– With LED indicator.LED indicator shows charging progress:25% -50% -75% -100%.
– When the battery is fully charged, the indicator light is always on.
Package included
– 1 x Battery charger
– 1 x USB Charging Cable
Weight | 0.3 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.