30pcs 2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$178.88
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
TY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the latched or non-latched mode. There are 6 input ports for transmission, corresponding to the 6 output ports received, which can be extended to 64 channels. The 6 channels can work independently or at the same time without interference. The module adopts the learning code mode and the module has a single ID number. A remote controller can arbitrarily learn the ID address and data channel of a receiving module. The receiving module has a learning and prohibiting learning function to prevent illegal learning of the same type of remote controller, and the application security level is high. The module is small in size, low in power consumption, and easy to use. The transmitter module only needs to design a button board according to the remote control shell. The receiving module has no peripheral parts, and does not need any programming. The coding chip is very convenient and simple to use, and multiple sets of products can be simultaneously Use without interfering with each other, effectively solve the problem that 315/433M remote control products cannot be launched at the same time.
RX mode conversion function
Latch mode:RX output port is normally 0 level state, press the button once, receive the output high level and latch, press the button again, the receiving output becomes 0 level, the B8 port needs to be connected to GND.
Non-latching mode:Press and hold the transmit button, receive the output high level, release the button, and receive 0 level. The B8 port needs to be connected to VDD.
Pair code and disable code function
TX and RX must be used for the code. RX can only identify the TX with successful code. After the code is successful, the B7 code port must be disconnected (floating) to prohibit other TX pairs, preventing other remote controllers from illegally controlling the code. Your receiving device. The receiving pair code port does not limit the number of pairs of the remote controller (multiple send 1 version) in the allowable code status, allowing several remote control code to be determined by the owner. If the receiving module (RX) is replaced after the code is coded, the original remote control (TX) needs to be re-coded. The remote control can only control its own receiving device. If a remote controller and its receiving device are paired with the code, then learn the other. Receiving the device and learning successfully, the receiving device will no longer receive the information of the remote controller and automatically clear the remote controller. If you need to use this remote control, you need to re-receive the device pair code. The password is a unique 32-bit address that is sent to the other party when the code is paired. Each transmission or reception can only store a unique password. If the code is re-coded, the original password will be cleared.
Package included
30 x TY24D-TX Module
30 x TY24D-RX Module
Weight | 0.12 kg |
---|
Customers Also Viewed
6Pcs Pulse Power Supply Plug Connector Pigtail for Polaris Ranger XP1000 & RS1 2018 2019
$30.36ConnectorsAdd to cartSpecificationColor:As the pictures shownQuantity:6 PcsFitmentFor New Polaris Ranger XP 1000 3 SeaterFor Polaris Ranger and Polaris RS1For Polaris Ranger Crew XP 1000 EPS 2018 (Any Machine with Pulse Style Connector)For Polaris Ranger XP 1000 EPS 2018 (Any Machine with Pulse Style Connector)Features– Easy to Install.– Fully sealed and weather proof.– Plugged right in and seals …
6Pcs Pulse Power Supply Plug Connector Pigtail for Polaris Ranger XP1000 & RS1 2018 2019Read More
900pcs PH2.0 2p 3p 4 pin 2.0mm Pitch Terminal Kit / Housing / Pin Header JST Connector Wire Connectors Adaptor PH Kits
$21.69Electronic Accessories & SuppliesAdd to cartDescription2pin = 20 sets = 120pcs3pin = 20 sets = 120pcs4pin = 20 sets = 120pcsPin Connector Terminal:540 pcsTotal:60set(900pcs)Package included3 x 300pcs PH2.0 2p 3p 4 pin 2.0mm Pitch Terminal Kit
PortaPack H1 with TCXO Touch Screen for HackRF one 1MHz-6GHz SDR Receiver and Transfer Board AM FM SSB ADS-B SSTV Ham Radio Transceiver
$223.22Motherboard & Development BoardAdd to cartShell:Product ID:1566465FeatureNote:This version includes TCXO.WIKI:https://github.com/sharebrained/portapack-hackrf/wikiFAQ:Black screenSolution:The program is not burned, please install the program:to openThe PortaPack attaches to your HackRF and adds a touchscreen display, navigation controls, headphone jack, a real-time clock, and a micro SD card slot.Just add a USB battery, and yoursquore ready to explore the radio spectrum wherever you are. The PortaPack …
Yahboom Ultrasonic Module for Microbit Ranging
$15.35Smart Robot & Solar PanelAdd to cartIntroduction of Ultrasonic moduleMore info for you to download1.Working principleThe ultrasonic module is a sensor that uses ultrasonic characteristics to detect the distance. It has two ultrasonic probes for transmitting and receiving ultrasonic waves. The range of measurement is 3-450 cm.3-1 Ultrasonic emission and reception schematic(1) You need to input a high level signal of …
2 Channel Port 180-240V ON/OFF Wireless Digital Remote Control Light Wall Switch 20M
$10.92Smart ModuleAdd to cartFeaturesEasy to operate which can fully turn on or turn off the whole circuit.With the capability of penetrating walls and anti-disturbance.Fast and easy installation, not obstructed by walls, capable of connecting any loadsRemote controller and switch can be used simultaneously for ease and flexibilityEquipped with high load relay,high voltage capacitor and high quality receiver.Apply electrical:Droplight, …
2 Channel Port 180-240V ON/OFF Wireless Digital Remote Control Light Wall Switch 20MRead More
W5500 Ethernet Module LAN Network Module with Logic 3.3V/5V Shield
$22.50Smart ModuleAdd to cartFeatureThe W5500 – Ethernet LAN Network Module can be used to provide your projects with internet connectivity. The W5500 module enables users to have Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10 / 100 Ethernet MAC and PHY embedded. Supports 8 independent sockets simultaneously.The W5500 Ethernet module …
W5500 Ethernet Module LAN Network Module with Logic 3.3V/5V ShieldRead More
2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$3.60Smart ModuleAdd to cartIntroductionNF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.NF-04 can be widely used in various Internet of …
Reviews
There are no reviews yet.