10pcs 2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$61.84
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
TY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the latched or non-latched mode. There are 6 input ports for transmission, corresponding to the 6 output ports received, which can be extended to 64 channels. The 6 channels can work independently or at the same time without interference. The module adopts the learning code mode and the module has a single ID number. A remote controller can arbitrarily learn the ID address and data channel of a receiving module. The receiving module has a learning and prohibiting learning function to prevent illegal learning of the same type of remote controller, and the application security level is high. The module is small in size, low in power consumption, and easy to use. The transmitter module only needs to design a button board according to the remote control shell. The receiving module has no peripheral parts, and does not need any programming. The coding chip is very convenient and simple to use, and multiple sets of products can be simultaneously Use without interfering with each other, effectively solve the problem that 315/433M remote control products cannot be launched at the same time.
RX mode conversion function
Latch mode:RX output port is normally 0 level state, press the button once, receive the output high level and latch, press the button again, the receiving output becomes 0 level, the B8 port needs to be connected to GND.
Non-latching mode:Press and hold the transmit button, receive the output high level, release the button, and receive 0 level. The B8 port needs to be connected to VDD.
Pair code and disable code function
TX and RX must be used for the code. RX can only identify the TX with successful code. After the code is successful, the B7 code port must be disconnected (floating) to prohibit other TX pairs, preventing other remote controllers from illegally controlling the code. Your receiving device. The receiving pair code port does not limit the number of pairs of the remote controller (multiple send 1 version) in the allowable code status, allowing several remote control code to be determined by the owner. If the receiving module (RX) is replaced after the code is coded, the original remote control (TX) needs to be re-coded. The remote control can only control its own receiving device. If a remote controller and its receiving device are paired with the code, then learn the other. Receiving the device and learning successfully, the receiving device will no longer receive the information of the remote controller and automatically clear the remote controller. If you need to use this remote control, you need to re-receive the device pair code. The password is a unique 32-bit address that is sent to the other party when the code is paired. Each transmission or reception can only store a unique password. If the code is re-coded, the original password will be cleared.
Package included
10 x TY24D-TX Module
10 x TY24D-RX Module
Weight | 0.04 kg |
---|
Customers Also Viewed
20pcs ADC CMOS CD74HC4067 16CH Channel Analog Digital Multiplexer Module Board Sensor Controller
$34.67Sensor & Detector ModuleAdd to cartDescription1. This is a board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can’t be higher …
10pcs Geekcreit Colorful 3D Mini SMD PCB Stereo Christmas Tree DIY Music Kit
$45.51DIY Electronic KitsAdd to cartDescriptionThis is a simple mini Christmas tree DIY kit. Three different PCBs are combined into a 3D stereo Christmas tree model. A variety of different colors can be selected. It can be powered by a button battery and can be free from the power supply. Built-in 7 LED gradient modes plus 7 different Christmas melody.Manual:Click …
10pcs Geekcreit Colorful 3D Mini SMD PCB Stereo Christmas Tree DIY Music KitRead More
1 Copper Sheet + 2 Aluminum Sheets Heatsink Kit with Black Glue for Raspberry Pi 4B
$9.10Raspberry Pi & Orange PiAdd to cartDescriptionsThe colorful set is 1 copper sheet and 2 aluminum sheets. They are designed for Raspberry Pi 4B for heat dissipation.Package Included1 x Copper Sheet2 x Aluminum Sheets
pyWiFi- ESP8266 Development Board Micro-Python IoT Wireless WiFi Learning Kit
$90.96Motherboard & Development BoardAdd to cartpyBase Boardpyboard interface:support pyboard, pyWiFi-ESP32, pypyWiFi-ESP82662.54mm pin header:lead out all interfaces of pyboardButton * 2:RST and USR buttons are brought outPotentiometer:ADC inputPassive buzzer:DAC outputButton battery holder:Install CR1220 button batteryServo interface:servo interface * 1- * 4 (external isolation circuit is required to connect the servo)OLED interface:4P / 0.96inch / I2C / OLED Display1.77 Inch LCD interface:suitable …
pyWiFi- ESP8266 Development Board Micro-Python IoT Wireless WiFi Learning KitRead More
3pcs 433MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver Board
$29.79Smart ModuleAdd to cartFeatureProduct Name:Wireless 3000m Transmitter ModuleProduct type ZAB-3000 (without coding)Dimensions:45mm*17mm*6.2mmWorking voltage:DC 9V ~12VWorking current:200~220mAOperating frequency:433MHzTransmit power:>10mwLaunch distance:2000-3000 metersRadiated power:1.5 WModulation method:ASKQuiescent current:0uARated parameter:Symbol:ValueDC supply voltage:VDD-VSS:5VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°C:PIN:Description1:ANT:RF signal input pin, this pin should be connected to the antenna2:VSS:Positive power supply3/4:GND:Negative power supply5:DATA:Data signal output, compatible with CMOS levelsPackage includes3 x Wireless 3000m …
3pcs 433MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver BoardRead More
10Pcs DHT11 Digital Temperature Humidity Sensor Module for
$25.06Electronic Accessories & SuppliesAdd to cart10Pcs DHT11 Digital Temperature Humidity Sensor Module For Description DHT series numeric humiture sensor Humidity measuring range:20%-90%RH(0-50°Ctemperature compensation) Temperature measuring range:0 to +50°C Humidity measurement accuracy:±5.0%RH Temperature measurement accuracy:±2.0°C Response time Low power consumption Size:about 2.3cm x 1.2cm x 0.5cm Applications HVAC Testing and inspection equipment Automotive Data logger Consumer goods Automatic control Weather station …
10Pcs DHT11 Digital Temperature Humidity Sensor Module forRead More
Reviews
There are no reviews yet.