SMACO 0.5L Portable Diving Reserve Air Tank Set Hand Pump Oxygen Cylinder Mini Operated Pump
$350.31
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Weight:4011g
Package Case Size:Approx.64*17.2*6cm/25.19*6.77*2.36inch
Diving Oxygen Cylinder
Capacity:0.5L/500ML
Material:Aviation Aluminum
Oxygen Cylinder Weight:1256g
Air capacity:3.0 Cu.Ft / 85 Litters
Max. pressure:3000PSI / 200bar / 20MPa
Number Of Breaths:170 Times
Available Time:5~10min(Depending on the water layer)
Max. dwell time underwater:10mins
Size:Approx.35*11*6cm/13.77*4.33*2.36inch
Manual Inflator Pump
Color:Black+Silver
Pumping Time:7-10min
Size:Approx.61*26.3*3.5cm/24.01*10.35*1.37inch
Features:can use it to inflate the 0.5L mini oxygen bottle directly
Respirator Bag
Material:600D High-Elastic PVC
Color:Fluorescent Green
Size:Approx.35.5 * 4.5 * 7 cm/14.0*1.8*2.8in
Straps Size:Approx.90.5*3.1cm/ 35.62*1.22inch(Adjustable length)
Features:Used to hold oxygen cylinder, easy to carry.
Application
Diving for entertainment,Diving for training
Spare tank diving air
Inflateble Way
1.The Big Oxygen Bottle Inflates It
2.The Electric Inflate Pump Inflates It
3.Manual Hand Pump To Inflate It
Features
– Compact portable lightweight ,easy to carry.
– Breathe underwater diving with total freedom.
– Supports 3 types of inflation.
– Made of aviation aluminum material and meets manufacturing standards of diving equipment.
-Diving storage bag can Folding & washable,Dries quickly,the fabric is breathable.
Warning
Do not use this article before reading and understanding the instructions and notes.
1. This product is suitable for recreational diving within 10m. Do not attempt to use it as an air supply in deep water.
2. This product can be used as a backup air source for recreational diving within 30 meters.
3. This product is suitable for waters above 10℃ Celsius.
4.Inflate the product before use and check for damage or leakage. Never use items that are damaged, leaking or showing signs of performance error.
5. The maximum filling pressure of this product is 3000 PSI or 200bar,And can only fill the compressed air that the human body breathes.Gases with oxygen content greater than 40% cannot be used.
6.Keep the product in a cool, dry place away from direct sunlight.Do not store in a car trunk or high temperature, or put it in fire.
7. After filling the air, the pressure must be released first.
8. When the gauge pointer reaches the red area, please rise to the surface, inflate again to use.
9.Emergency equipment must be used in an emergency. This product does not provide protection in the event of danger.
10. When using for the first time, please practice in shallow water.
Package Included
1 x Oxygen Cylinder
1 x Inflator Pump
1 x Respirator Bag
1 x Package Case
1 x User Manual
Note
– About after-sales issues with accessories:Guests who refund or reissue due to missing accessories need to take a video in advance (open the box) and send it to us.Please understand.
– Due to the light and screen difference, the item’s color maybe slightly different from the pictures. Please understand.
– Please allow 0.5-1 inch difference due to manual.
Weight | 4 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.