3 IN 1 Soil Tester Display PH Meter Water PH Moisture Test Meter Moisture Humidity Kit for Garden Plant Flower
$22.26
Color Silver / Color Green /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Type:PH Soil Tester
Product Name:3 in 1 Horticulture Detector
Product color:light green silver
Measuring range:Illumination humidity value PH value
Use:Insert into soil
Scope of use:warm and humid flower garden, garden, greenhouse, etc.
Product size:about 26cm / 10.14inch
Probe length:Approximately 17.5cm / 6.83inch
(1cm=10mm=0.39inch)
Measurement Details in the attached picture.
Package included
1pcs PH Soil Tester
Features
100% brand new and high quality.
It is a water 3-in-1 soil tester, professional in testing soil moisture, PH value and environment sunlight intensity.
Use ergonomics. It is easy and fast for user to use with simple key operation mode and comfortable hand feeling.
No battery needed.
Measure precisely,respond quickly.
Made of good quality materials, rust-proof and durable
Accurate Reading:pH Range:3.5-8ph (3.5-6.5 Acid, 7-8 Alkaline), Moisture Range:1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet), Relative Light:0-2000lux (0-200 Low, 200-500 Low , 500-1000 Nor, 1000-2000 High).After a while, you will get a accurate data.
Using Method
1. Measuring soil pH, as far as possible to probe deeply into the earth and probe the upper portion for about 1 cm.
2. On the table is 2.5-9 numerical, numerical 7 basic is neutral, the smaller the number shows that the greater the acidity, please adjust soil pH value according to plant varieties.
4. Please pay attention that insert electrodes without touching the stone, not too hard, otherwise easy to damage the electrode, clean electrode after use.
Weight | 0.09 kg |
---|
Customers Also Viewed
Excellway 11Pcs Terminal Removal Tool Kit Wiring Connector Pin Release Extractor
$14.16ConnectorsAdd to cart11pcs Terminal Removal Tool Kit Wiring connector Pin Release Extractor PullerBrand:Excellway®Color:BlackMaterial:AluminumFeature1.This kit set is designed to remove car wire terminals without damage.2.Please don’t Pry the terminals with this kit, Just push and pull the terminal pins.Packing Included1x 11pcs/set Wire Terminal Removal Tool
20pcs 0.36 inch DC0V-32V Blue LED Digital Display Voltage Meter Voltmeter Reverse Connection Protection
$67.74Test & Measuring ModuleAdd to cartFeature∵ Super high precision∵ Ultra-low startup voltage, red minimum 2.5V, green minimum 2.7V, blue minimum 3.0V. When the power supply voltage is lower than 3.5V, only the brightness is lowered, but the measurement accuracy is not affected.∵ With reverse connection protection, it will not burn.Measuring range:0.00V-32.0VPower supply range:Red DC2.50-32.0V, green DC2.70-32.0V, blue DC3.00-30.0VHighest input:DC32.0V. Note:If …
10Pcs 100mm OD 12mm 3mm Thick Wall Borosilicate Glass Blowing Tube
$30.36Lab TubesAdd to cartProduct DescriptionHigh quality borosilicate glass, Premium borosilicate tubing, preferred by scientific and artistic glassblowers world-wide. HEAVY wall tubing 10 pieces, 12mm outside diameter with a 3mm wall – all approximately 100mm long. This glass tube bends easily with propane (LPG) and oxygen mix. Brand new, high quality, heat and corrosion resistant. SpecificationName:10Pcs 100mm OD 12mm …
10Pcs 100mm OD 12mm 3mm Thick Wall Borosilicate Glass Blowing TubeRead More
VHM-306 TPA3118 2x30W 12-26V DC Stereo Audio bluetooth 4.2 Digital Power Amplifier Board for Amplifiers D3-001
$16.83Amplifier BoardAdd to cartSpecificationsModel:VHM-306 Audio input:DC12~36V Power amplifier chip:TPA3118 Bluetooth channel:stereo Output Power:30W*2Applicable impedance:4,6,8Ω AUX input:3.5 earphone holder Product Size:70*52*12mm Package Included1 x VHM-306 TPA3118 2x30W Bluetooth 4.2 Digital Amplifier Board
10pcs XD-M131 DC 12V Photosensitive Resistor Module Light Control Switch Photosensitive Relay Module
$49.09Relay ModuleAdd to cartSpecificationProduct model:XD-M131Product Name:photosensitive relay moduleOperating voltage:12VOutput mode:one channel relayOverall size:52 x 31 x 31mmDescription1. This product is mainly used for light detection, brightness detection and control and other occasions, through the potentiometer can be adjusted to detect brightness threshold. With the relay, it can do a variety of brightness detection switch, you can control a …
5pcs 1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial Port
$54.01Display ScreenAdd to cartFeatureResolution:128X160Driver IC:ILI9163/ST7735Module with regulator IC supports 3.2V/5V power supplyWith SD card holder, you can do experiments like digital photo frameThe module reserves the Nokia3310/5110 interface, supports the 1602 interface, and directly plugs in and out.IO for streamlined wiring:(only 3 IOs after optimization)1. RST– directly connected to the microcontroller reset signal terminal, this IO can save2. …
5pcs 1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial PortRead More
Reviews
There are no reviews yet.