Chihiros Doctor 3rd Algae inhibitor Device Aquarium Fish Tank Green Plant Remove
$164.01
Plug UK Plug /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Type:Mesh/Whole set
Color:White
Voltage:110-240V
Plug:UK/EU Plug
Weight:508g
Material:Plastic shell
Input Voltage:DC15V, 2.5A
Max Power:30W
TDS Ran ge:50-500
Package included
1X Whole Set Chihiros Doctor
Features
1.Inhibit green algae and promote plants growth
•Inhibit phytoplankton initial growth and reproduction.
•Activate microelements to promote plants growth
•Pro-motion of plants growth activates photosynthesis to stabilize ecosystem.
2 Kill the crustacean pathogenic bacteria
Automatically kill the pathogenic bacteria in the water in each hour through direct and indirect disinfection, which greatly improves the survival rate of juvenile prawns.
3 Depend on strong sterilization capabilities effectively kill pathogens
•Aeromonas hydrophila Aeromonas inchAeromons hydrophilainch, herpes, fungal, coli forms and other 99.9% kill efficiency results test.
4 Safe because of coexistence with filter bacteria
•As there is no residual toxicity, it is limited to aerobic bacteria.
•Compared to UV sterilizer, Chihiros DOCTOR does not work steadily so regenerating and recovery of filter bacteria is rapid.
5 ALC program is intelligent management algorithm
•Aquarium environment changes according to initial, middle, last stage, sterilizing inten-sity and operation cycle is intelligently designed to change by time series.
•As ALC program can simply choose a mode according to a aquarium capacity, it is very easy to use.
6.The new Chihiros Doctor has integrated 3 application covering usage of aquaticplants, fish and shrimp keeping into only a single Doctor device
Q & A
1.How does the Chihiros Doctor works
—It is designed not work all the time, it works bubble come out about every 30seonds
2.Does it hurt fish
—No influence to fish, shrimp and plant
3.Can it use in marine water
—Only used for fresh water
4.How long do I need to clean the mesh
—The new 3rd generation mesh can keep use for long time without clean, but we suggest exchange a new mesh every 6 months
NOTICE
1. If the product is not working properly, please check if the fish tank water quality TDS is too high (adding disinfectant salt or other substances to the water will cause the TDS to be too high). If it is too high, please replace the tap water in the fish tank.
2. The product host should be waterproof, otherwise it will cause the host to burn out and not work.
Weight | 0.508 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.