DIY Audio Plasma Speaker Kit Classic TL494 Single High Power Sound Music Can Restore the True Tone
$110.85
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Product Name:Plasma Speaker
Input:24V DC
Size:106mm*79mm
Audio input:3.5mm for the source device used
Features
-The product emits sound by directly driving the ionized air to vibrate;
-The product can restore the true tone to the maximum extent;
-This is the best choice for DIY enthusiasts, taking you on a magical journey with technology and DIY.
Package Included
1 Set * Plasma Speaker
Working Principle
1. Under normal conditions, most of the molecules of air are neutral and uncharged. However, after high-voltage discharge, it becomes charged particles, which is called dissociation or ionization;
2. The intense ionization process produces arc discharge. The cross-sectional diameter (thickness) of the arc is proportional to the current in the arc, and the thickness is the difference in the degree of air expansion;
3. Controlling the magnitude of the current in the arc by the audio signal produces a corresponding wave, which is the principle of the ion speaker.
Note
1. The product’s tl494 chip is of stable quality and does not have a base;
2. The voltage of this product exceeds 20kv, which has certain dangers. Buyers need to have sufficient risk awareness for high pressure;
3. This product uses arc sound, which is completely different from the speaker of traditional microphone. Please do not compare the sound quality and volume with the amplifier speaker (see the video introduction for the specific effect);
4. If the product is not working, please check if all components are well soldered, the GDT magnetic ring is disconnected,and the component is reversed or hot, etc. If you can’t solve it, please contact customer service;
5. The size might be slightly errored due to manual measurement. Your kindly understanding would be appreciated;
6. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the picture.
Weight | 0.8 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.