1.2v – 12v Battery Capacity Meter Tester for 18650 li-ion/lead-acid Battery
$28.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Power supply voltage:DC4.5-6V (micro USB connector)
Operating Current:less than 70mA
Discharge voltage:1.00V-15.00V 0.01V resolution
Termination voltage range:0.5-11.0V
Supported by current:3.000A 0.001A resolution
Maximum voltage measurement error:1% + 0.02V
Maximum current measurement error:1.5% + – 0.008A
Maximum battery capacity range:9999Ah (1Ah = 1000mAh) greater value by shifting the decimal point to switch, when the display is less than 10Ah X.XXX, as shown above to achieve 10Ah XX.XX, and so on.
Board size:50mmX37mm
Finished Size:50mmX37mmX17mm (length X width X height maximum position size, contains copper foot height)
Features
ZB2L3 battery capacity tester discharge type 1.2-12V external load capacity of the battery and other tests 18650 Tools, single-function, by controlling the load off and get real-time integrated discharge current capacity results.
Maximum support 15V 3A discharged through the discharge voltage and current, itself does not discharge.
Maximum capacity statistics support 9999Ah (9999000mAh).
Automatically identify and develop appropriate battery termination voltage can also be manually adjusted.
Instructions
1. The first test should be fully charged battery.
2. Connect the battery to be tested positive to positive input, a negative input to the negative, can not be reversed (with load reversal may damage the circuit)! Load connected to the output of the positive and negative output, to work through the tester micro USB power supply (not available desktop or laptop USB powered), then the battery voltage.
3. Direct start test need only one press of the inchOKinch button, the tester can automatically develop an appropriate termination voltage of the battery full charge voltage, and will start flashing after the test three times. Need to develop artificial termination voltage only when the battery voltage display state by pressing inch+inch or inch-inch buttons to modify the termination voltage display beginning with P, behind the representative voltage resolution 0.1V, set up after pressing the inchOK inchstart testing.
4. After the start of the test the tester will control the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and battery voltage (V) between the wheel was. When the battery voltage reaches the set cut-off voltage, load control switches off the tester display data stays in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the actual capacity of the battery is discharging capacity, about the press inchOKinch to terminate flashing allows stable data display, press again inchOKinch button to return to the power-on state can just replace the battery test the next section .
Error codes and their meanings
Err1:battery voltage is above 15V
Err2:battery voltage is lower than the termination voltage
Err3:Battery can not afford to load or discharge current line too much resistance
Err4:overcurrent (current exceeds 3.1A)
Package Included
1pcs Battery Capacity Meter Tester
2pcs load resistors
Weight | 0.026 kg |
---|
Customers Also Viewed
ESP8266 Development Kit with Display Screen TFT Show Image Or Word By Nodemcu Board DIY Kit
$32.79Smart ModuleAdd to cartDescriptionThis product kit can be used for some of the functions of the application of things, for example, display temperature and humidity, weather data display.TFT screen informationTFT screen and NodeMCU connection diagramPackage included1 x NodeMCU1 x 1.44 inch TFT screen8 x DuPont line
Band Pass RF Filter Band Pass 1420MHz BPF SMA-K
$93.91RF amplifierAdd to cartFeature1) Operating frequency:1420÷50MHz2) Insertion loss:1.8db3) Out-of-band suppression:40dB@50MHz4) Input impedance:50 ohm5) Output impedance:50 ohms6) Maximum input signal strength:13dbm (20mw)7) Input interface:SMA-K (SMA female)8) Output interface:SMA-K (SMA female)9) Dimensions:35*22*11mm10) Product weight:22gPackage includes1 x Band Pass RF Filter Band Pass 1420MHz BPF
XH-M548 2x120W Power Bluetooth Dual Channel Digital Amplifier Module TPA3116D2 Audio Amplifier Board
$28.42Amplifier BoardAdd to cartDescriptionThis product is a built-in TPA3116D2 chip with the power of 2*120W Bluetooth channel digital power amplifier board.SpecificationsParameterValueChipTPA3116D2Supply voltageDC12-24VOutput power120W*2 Supply currentMore than 3APower ratioMore than 90%Bluetooth moduleBTM835/CRS8635 (4.0 version)Transmission distanceMax 10M( without interfere)Vocal tract number2 channel (High bass control)switching frequency1.2MHzAppearance size98*80*18mmModels that support Bluetooth connectivityAndroid seriesIOS seriesWindows series Bluetooth connection methodTake mobile phone as …
3Pcs J03 LED Digital Time Delay Relay DC 6-30V on off Trigger Delay Timming Timer Switch Micro USB Power Supply 5V 12V
$32.79Relay ModuleAdd to cartFeatures1. Wide voltage power supply (6 ~ 30V), supports microUSB 5.0V power supply, easy to use;2. The interface is clear and simple, powerful, easy to understand, meet almost all your needs;3. The emergency stop function (“STOP’key);With reverse polarity protection, reverse polarity will not burn the product.4. Increase the sleep mode, if this mode is enabled, …
50pcs Scotch Lock Quick Splice 22-18 AWG Wire Connector Red
$8.99Terminal BlocksAdd to cartDescription50pcs Scotch Lock Quick Splice 22-18 AWG Wire Connector RedFeaturesEasy crimping with normal tool.Quick installation without striping wire job.Safety insulator tap.Suitable for Conductors in the rangeConductor CSA (Cross Sectional Area) 0.5 – 1.0mm², AWG (American Wire Gauge) 22 -18.Make Quick Connections without stripping.Easy crimping with normal tool, squeeze down the metal insert with pliers and …
50pcs Scotch Lock Quick Splice 22-18 AWG Wire Connector RedRead More
Excellway PCT-2 50pcs 2Pin Colorful Docking Connector Electrical Connectors Wire Terminal Block Universal Electrical Wire Connector
$54.66ConnectorsAdd to cart50pcs 2Pins Colorful Docking Connector Reusable Spring Terminal Block Electric Cable Wire Connector Main Features Wire connector. No wire loose, the risk of crisp tape, transparent and safe to see. With a test hole, measuring voltage, without removing the tape. Direct plug, insert the wrong can be pulled out, re-connected. Each contact point at the …
RIDEN 7 in 1 33V 10A Multifunction White OLED Digital Electrical Parameter Tester Ammeter
$26.23Power Supply ModuleAdd to cartSupport function:Voltage, Current, Time, Power, Temperature, Capacity, Energy, Run TimeFeatureOLED:WhiteVoltage:33VCurrent:10ANote:The measurement range are for reference match only, please check the value according to the voltage and current.Package includes1 x 33V 10A Electrical Parameter Tester
Reviews
There are no reviews yet.