3000W AC220V-250V to DC 48V 62A ZVS Heating Switching Power Supply R48-3000e3 for induction Heater
$201.49
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Tips:This product is the power supply for the communication base station, which should have a communication connection with the chassis. If you do not have a communication connection, the yellow light will flicker, which is a normal phenomenon and does not affect the normal power output.
Feature
High efficiency, reduces power consumption for lower operating costs
Full output power (3kW) up to +45C allows savings on the climate system and operating costs
Wide input voltage range to operate in the most demanding environments
Hot-pluggable facilitates future expansions and easy maintenance
Compliant with global standards deliver quality, performance, and reliability no matter what the application or location demands
Description
The 3000W high-efficiency rectifier ( model R48-3000e3) is designed to convert standard AC supply voltages into stable nominal -48 V DC voltage that is adjustable to application needs.
The R48-3000e3 is a constant power rectifier designed with the latest patented switchmode technology, using DSP (Digital Signaling Processor) functionality for efficient operation.
For a higher load capacity, rectifiers can be connected in parallel, and intelligent control can be added with the help of a separate controller.
AC Input
Input Voltage, Nominal:200 to 250 VAC
Input Voltage, Permitted Variation:85 to 300 VAC
Line Frequency:45 to 65 Hz
Max Input Current:22 A
Power Factor:>0.99 for 50%-100% load
THD (Total Harmonic Distortion):5% for 50%-100% load, 2%no load
DC Output
Output Voltage, Not adjustable:48V DC
Output Power:3000W Maximum
Output Power, Derated for Input Voltage:See diagram
Output Current:62.5A@-48VDC
Output Current Limit Set Point:0 to 62.5A
Peak Efficiency:95.5%
Temperature Derating:Full output power up to +45C at input voltage range of176-264VAC
Controland Monitoring
Rectifier Alarm and Signaling Alarm and status reported via CAN bus to system controller
Visual Indications Green LED:Normal
Operation Yellow LED:Alarm (means no communication connection)
Red LED:Failure
Environmental
Temperature Range, Operating:-40 to 70C,-40 to +158F
Temperature Range, Storage:-40 to +70C, -40 to +158F
Relative Humidity:0 to 95%
Altitude:2000 m, 6560 ft at full power
EMC:ETSI EN300 386:2005, Class B.
:EN55022, Class B
Safety:EN 60950-1; IEC 60950
Mechanics
Dimensions (H x W x D) 41×84.5x330mm/1.61×3.33×13 inches
Weight 1.5kg/3.41lbs
Package includes
1 x Power supply
Weight | 1.861 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.