ALEKO 433MHz Backlight Wireless Keypad Universal Remote Control Switch for ALEKO Gate Door Access
$111.36
Color. Blue /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Model:KP-01
Color:Black / Blue
MaterialPlastic
Size:85*75*35mm / 3.3x3x1.4inch
Power6VDC 2 CR2032 (230mAh) lithium batteries
Battery life:About 2 years, 10 times a day
Working frequency:433.92 MHz +/-75KH
Emission power:About 1mW
Encoding formatHCS101 standard format
Working temperature:-10~+55 C
Digit number:0 to 8 bits
Launch distance:Open Distance 200 meters; indoor distance 35 meters
Protection grade:IP54
Product description
-This is a dual channel transmitters that are activated only after having entered a Suitable combination.
-The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code is changed at each transmission session.
-The estimated transmission range is 200 m in open space and 35 m indoors
-The units are designed to ensure battery life equivalent to an estimated 2 years of operation considering 10 transmissions/day
Installation
-Before physically installing the it in their mouning position it is good practice to perform a practical test to assess their functionality and effective range.
-Consider that range may be up to 25 or 30% less when battery power is low
positioning
-Apart from the distance from the receiver, the units should not be positioned in the vicinity of or-worsestill-in contact with metal structures, which could otherwise exert a signal shielding effect. Thanks to the enclosure protection rating of IP 54, the digital selectors can be installed outdoors if required.
Audible signal status
-1 short beep
-Keypad tone
-1 long beep
-Modification of combination confirmed (or send the signal after enter the correct password )
-5 short beeps
-Error during combination input or combination edit operation
-2 low beeps
-Battery low warning signal New batteries required
Method of use
-The use of the keypad is based on inchcombinationsinch, i.e. numbers of from 1 to 9 digits that the user is required to key in by means of the keys.Once the combination has been entered the user then presses confirm key3 or 4 to transmit the activation command
to respectively.
-Receiver channel 1 if the user presses3
-Receiver channel 2 if the user presses4
-The command will be transmitted only when a valid combination has been entered ,if an incorrect combination has been entered the selector will emit an error, warning signalwhen the confirom key is pressed
-The combination entered must be exact,if, for example:the correct combination is 0422, the following attempts will be interpreted as errors:422,10422, 04222
-Therefore, if the user inadvertently presses the wrong key,when entering a combination, combination key3 or 4 should be pressed immedliately to generate the error tone,after which the correct combination can be entered starting from the beginning again
-While entering the combination no more than 6 seconds can be allowed to elapse between keystrokes,after which interval the combination must be re-entered starting from the beginning.
-The units are factory programmed with a standard combination to activate channel one and a standar combination for channel two
The factory set combinations are as follows
-1a combination to transmit the code associated with the 3 key
-When the unit is used for the first time this combination is11
-2a combination to transmit the code associated with the 4 key
-When the unit is used for the first time this combination is 22
Weight | 0.263 kg |
---|
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.