5Pcs 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater
$125.01
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
This is 1002 HIFI ,If you need other parameters, please click ID to buy.
502C HIFI ID:1582750
502L MINI ID:1652630
1002L MINI ID:1652631
Specifications
Features
– This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.
– TPA3116D2 is a type D amplifier IC launched by TI company, which has very high index parameters.The maximum modulation frequency is 1.2MHZ, and the high power output distortion is less than 0.1%.
– The red and gray ring inductors are specially designed for digital power amplifiers, featuring low loss, high bandwidth and high fidelity.
– The 684 film capacitor is a special capacitor for audio amplifier, which has the characteristics of low loss, high bandwidth and high fidelity.
– With AUX and bluetooth two audio source input mode, two in one.
– Potentiometer adjust volume, easy to control volume, very suitable for DIY speakers.
– Copper DC female head, fence terminal, withstand large current, no heat, no damage to the line, good wiring, not easy to short circuit.
– 5.0 bluetooth version, higher transmission efficiency, longer transmission distance.
Note
The power switch on the board is standby switch, and the machine is in standby state with low power consumption after the switch is turned off. To completely turn off the power or to remove the DC plug on the machine for a long time, it is ok.
Question and Answers
1. How to choose the power source
The board’s power supply is crucia1.The higher the voltage, the greater the current, the more power output, if you only have 12V/1A, this can carry 3-4 inch speakers.If you are above 19V/5A, 8-10 inches is fine.Power supply must be highly valued.If the voltage is too low, the sound will easily cause distortion after amplification. If the current is too low to carry the speaker, the voltage will be pulled down, and the work will be abnormal or the sound quality will be poor.
It is recommended to use 18V19V24V power supply with current above 5A.If you only have 9V12V or 1A 2A power supply, you can also use it with low power. Be careful when using it at the maximum volume, it may cause distortion and affect the sound quality.
2. How to choose the speaker
Common speakers are usually 8 ohms, can not distinguish between positive and negative polarity, the effect is the same, 4 ohms can also be used.If your horn power is small, it may be between 10W and 30W can also be used. The power supply voltage is small to prevent the speaker from burning down after playing loudly. For example, choose the power supply below 15V.If you are a 50w-300w speaker, don’t worry about the speaker burning problem, you can choose a 12-24v power supply, the higher the selected voltage, then the greater the output sound or power.
3. How to choose bluetooth or AUX audio input mode
Power up the power amplifier board, connect to the speaker, rotate the audio knob and the blue indicator light turns on, turn on the phone Settings — bluetooth — search to ‘bt-wuzhi’, and then click connect, after connecting successfully, there will be ding dong prompt sound, at this time for bluetooth mode, play music can, next time on the power will automatically connect back with the phone.
If you want to use AUX audio input, then disconnect the bluetooth connection, there will be an audio prompt, insert the audio cable to play music.IN AUX (LINE IN) mode, the connection bluetooth automatically converts to bluetooth mode.
4. It’s ok if the sound is small, but when the sound becomes larger, the sound will be turbid.
The sound has been distorted. Please replace the adapter with a higher voltage level.
5. It’s ok if the voice is small, but when the voice becomes louder, the sound will slow down.
The power of the input power is insufficient, and the power supply itself is intermittent power failure protection, please replace the power supply with higher power;Or if the power is too large, the power amplifier plate generates serious heat, and the situation of thermal protection occurs. Reduce the power to use or check whether the heat sink fits well to strengthen the heat dissipation.
Package Included
5 x 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier
Weight | 0.66 kg |
---|
Customers Also Viewed
3pcs Geekcreit 3 in 1 AC 60-500V 100A Voltmeter Ammeter HZ Hertz Frequency Meter 22mm Digital Current Voltage Amp Signal Light Green LED Lamp indicator with CT
$30.29Electronic Accessories & SuppliesAdd to cartSpecificationsMaterial:ABS Electrical componentsColor:GreenVoltage Measuring Range:AC 60~500VCurrent Measuring Range:0~100AFrequency Measuring Range:20~75HzPanel Size:31*31mm / 1.22*1.22inInstallation Diameter:20.3mm / 0.8inPackage included3 x AC Voltmeter Ammeter Frequency Meter 3 in 1 Indicator3 x Current Coil Transformer
Waveshare 1.5 inch OLED Module SSD1327 Driver I2C Communication Compatible with Jetson Nano 128×128 General 1.5inch Display Board
$32.48Display ScreenAdd to cartDocumentsManual:Click here to openSchematic:Click here to openDatasheet:Click here to openCode:Click here to openOverviewThis is a general OLED display Module, 1.5inch diagonal, 128×128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface.Features128×128 high resolution16 gray scale, better display effectSupports SPI or I2C interface, configured via onboard resistorComes with development resources and manual …
10Pcs TDA2030A 6-12V AC/DC Single Power Supply Audio Amplifier Board Module
$19.32Power Supply ModuleAdd to cartSpecifications1. Onboard TDA2030A audio power amplifier chip.2. Mono 18W power amplifier circuit design.3. Socket onboard horn .4. The onboard 10 k adjustable resistance, can adjust the volume of the amplification.5. The onboard power light.6. Chip has lead to the main pin, can directly input audio signal.7. Working voltage:6 – 12V.8. Board size:33 x 25 x …
10Pcs TDA2030A 6-12V AC/DC Single Power Supply Audio Amplifier Board ModuleRead More
L60 60A 12V/24V Auto LCD MPPT Solar Battery Charge Controller High Efficiency Solar Tracking System
$247.04Solar ControllersAdd to cartDescriptionThis is a three-time controller into the evening(evening)working time,an interval of rest or pause time,Dawn working time(morning light function),the user can according to their needs,set a different time.A:time(evening working)B:time(Pause working)C:time(dawn working)This is a compatible MPPT charge controller PWM intelligent/efficient/energy saving,he not only has efficient MPPT controller charging function to automatically track the maximum power point,10%-30% …
5pcs W5500 Ethernet Module TCP/IP Protocol Stack SPI interface IOT Shield Geekcreit for Arduino – products that work with official Arduino boards
$54.95Smart ModuleAdd to cartIntroductionThe W5500 is a full-featured TCP/IP embedded Ethernet controller that provides an easier Internet connection solution for embedded systems. The hardware logic gates are used to implement the transport layer and network layer of the TCP/IP protocol stack (eg TCP). , UDP, ICMP, IPv4, ARP, IGMP, PPPoE and other protocols), and integrated data link layer, …
5 Blade Heat Self-Power Stove Fan Wall Mounted Magnetic Fireplace Eco Fan
$131.61Temperature ControllersAdd to cartFeatures1. Longer service life – the entire fan is made of aluminum alloy and will not rust or corrode when heated.Quiet – the only moving part is the blade assembly. You don’t even know the fan there, but you will feel warm!2. No battery or power is required – the stove fan uses the heat …
5 Blade Heat Self-Power Stove Fan Wall Mounted Magnetic Fireplace Eco FanRead More
Reviews
There are no reviews yet.