Aquarium Filter Automatic Cleaning of Excrement Fish Tank Toilet Suction Device Aquarium forced Fish Sucking
$48.59
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Material:PVC
Size:about 158*88mm/6.22*3.46in
Suitable for fish tank size:600-1000mm
Interface diameter:about 5mm
Features
– Fully automatic,compulsive absorption of fecal filters.
– Fish tank filter barrel aquarium automatic toilet cleaner in polygon geometric art acrylic shape.
– The overflow cover is designed to prevent overflow from the container opening when too much dirt is absorbed.
– The large volume saves time in cleaning the aquarium for ornamental fish manure.
– Easy to operate:Open the air pump in the water to clean the fish tank dirt.
– Oxygen Increasing and Filtering Water Quality:Built-in replaceable filter tank and special strong active biological beads can strengthen the physical filtration effect and provide the space for nitrifying bacteria to strengthen the biological filtration, which can fundamentally improve the water quality stability of the aquarium.
Package Included
1 x Filter Bucket
Note:This product requires 5W or more air pump to drive, this product does not contain air pump.
Problem Solving
1Q:After the product is installed, the filter fan does not working
A:It may be some problem on transporting the fan blade in the middle of the transmission. Therefore, if there is a sharp part, move the fan blade upwards or press it. Look for the correct position and try again. The fan will be a bit slow at first, but it will get faster as the bubble rises.
2Q:This product is not well packaged, the filter beads inside are leaking out
A:This product may leak out of the filter beads because of the problem of reversing the placement in the logistics. When you find out that the filter beads inside are leaking out, please isolate the cover of the net and align it with the bottom net buckle to reinstall it.
3Q:The air pump of this product is too small to move at all, and the air pump is too noisy.
A:It must use a pump of more than 5W. The problem with the large sound of the air pump is that the depth of the water in the aquarium is related. The water in the fish tank is too shallow to suck with noises. So the depth of the water is not too shallow.
Weight | 0.397 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.