T200 Aluminum Alloy Metal Chassis Tank Smart Robot Car Kit for Arduino – products that work with official Arduino boards
$162.40
Type Seven Light Colors with Remote / Type K10 Pro / Type C / Type 2 gaten / Type E / Type F /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
There are six kinds for your choice
A:Gold Chassis
B:Gold Chassis + Espduino kit
C:Gold Chassis + NodeMcu Lua kit
D:Silver Chassis
E:Silver Chassis + Espduino kit
F:Silver Chassis + NodeMcu Lua kit
Features
Elegant appearance
1) Reserve the space for 9g, MM95, MM96R gear;
2) Reserve for the installation holes for UNO R3 and NodeMCU development board kit;
3) Reserve the space for robotic manipulator;
4) Design the LED light for the dark moving and brighten the light;
5) Add the 25mm and 37mm motor frame, can change the 4WD smart car;
Aluminum alloy
1) The metal chassis is generated by aluminum alloy;
2) The bearing wheels and the driving wheels are metal;
3) The bearing wheel piece is connected by the stainless steel and two bearings, which can let the bearing wheel is rotate freely with small frictions.
Solid structure
1) The chassis can bearing the weight is about below 5kg; we test the 2.3kg;
2) All the chassis are metal, excluding the track (plastic).
Powerful force
1) It is very powerful;
2) with Hall sensor and feedback;
Quickly,stability, flexibility;
Strong power;
Specifications
Type:T200 Smart Robot Car
Material:aluminum alloy
Color:golden yellow/silver.
Wheel:metal
Track:plastic
Product size:about 300*220*55mm (length * width * height)
Motor Parameters
Name:25mm gear motor
Output speed:150±10%rpm
No_load current:200mA (Max)
Stall current:4500mA(max)
Stall torque:9.5kgNaN
Rated speed:100±10%rpm
Rated torque:3000gNaN
Rated current:1200mA (Max)
Noise:56dB
Working voltage:9V
Outside Shaft Length:14.5mm
Shaft End Play:0.05-0.50mm
Screw Size:M3.0
Diameter Of Shaft phi 4mm, D3.5
Encoder:2pulses/circle
Working voltage for sensor:3-5V
The motor paramter can be seen at http://www.smart.com/25mm-9v-dc-reduced-gear-motor-for-robot_p94537.html
Note
Track can be connected by any length with a needle.
Package included
1 x Chassis
2 x Driving wheels
6 x Bearing wheels
2 x Track (can be changed the length)
2 xDC motor
2 x LED light
Weight | 1.4 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.