Mini Jewelry Gas Mirco Torch Welding Brazing Cutting Tools
$109.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Material:Metal
Color:Multicolors
The highest welding temperature:1700℃
Interchangeable Torch Tip Length:43mm /1.69inch(appr.)
Length:205cm /80.71inch(appr.)
Features
Ideal for jewelry repair and construction, hobbyists, crafts, metal sculpture, glass blowing, and electronics repair and manufacturing. It can weld an unlimited range of materials.
Torch
The torch is designed to meet the requirements of industry for a small, lightweigh torch to weld, braze, heat and solder materials ranging from 3/16 Inch metal to ultra-fine wires. The six tips available provide a wide range of flame sizes allowing the versatility to perform many different tasks. Light weight construction and highly flexible hose provide pinpoint welding with maximum control.
Gases
The product can be used with most comonly available pressurized fuel gases:acetylene, hy-drogen, propanes, propylenes, natural gas or mapp with oxygen. The two smallest tips, sizes 1 and 2, can only be used satisfactorily with acetylene and hy-drogen fuel gases. CAUTION:When using natural gas, a minimum of 1 pound of pressure is required. Higher pressures are necessary for use with melting tips.
Tips
There are six tips available for the torch. SIZE 1, 2 AND 3 ARE FITTED WITHA SYNTHETIC SAPPHIRE to assure accurate gas flow because of the extraordinary small orifice size. There are also two different heating tips available, one for use with all gases and another specially designed for propane or natural gas. Refer to the pressure recommendation chart provided in this booklet for being used.
Repairs/Replacement of Hose
The torch hose is a special material designed to be compatible with the various fuel gases. The maximum length of hose used should not exceed 12 feet.
※EYE PROTECTION
Oxy-fuel flames produce hazardous rays of light(infrared/ultraviolet). An approved filter lens is required for eye protection when operation oxy-fuel equipment. Approved safety glasses are required in conjuncting with a filtered eye protection device.
※PROPER CLOTHING
Hazardous rays of light, molten metal, or sparks can cause severe burns to unprotected parts of the body. Appropriate protective clothing such as gloves, aprons, safety shoes, etc, are required when using oxy-fuel equipment.
WARNING:Keep all clothing and protective equipment free of oil and grease. These substances can ignite and will burn violently in the presence of pure of oxygen.
HOUSEKEEPING AND FIRE PROTECTION
The safety of any work area can be improved by following good housekeeping practices.
1. The work place must have a fireproof floor.
2. Work benches must have fireproof tops.
3. Nearby walls and unprotected flooring should be protected from sparks and hot metal by the use of heat resistant shields or other approved material.
4. An approved fire extinguisher must be kept and maintained (check regularly) in the work area.
5. The work site should be cleared of combustible materials. If such materials cannot be removed, they must be protected with fireproof covers and a fire watch should be established.
Package Included
1 x Mini Gas Torch
5 x Interchangeable Torch Tip
1 x English User Manual
Weight | 0.319 kg |
---|
Customers Also Viewed
10pcs NRF24L01 Wireless Module 24L01 2.4G Wireless Communication Module
$20.36Smart ModuleAdd to cart>>>Manual:Click here to openOverviewThis wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! This module can achieve a good balance between wireless transition performance and cost!You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system!Features– 2Mbit/s, 1Mbit/s, 250Kbit/s, three selectable transmission rate.– MultiCeiver …
10pcs NRF24L01 Wireless Module 24L01 2.4G Wireless Communication ModuleRead More
M5Stack ATOM H-Bridge Driver Kit DRV8876 N-channel H-Bridge Motor Driver ATOM Lite Kit DC Motor Control
$49.33Driver ModuleAdd to cartDescriptionATOM HDriver is a H-bridge motor driver accessory for M5Atom. It integrates the DRV8876 motor driver chip,which supports 9-24V/DC voltage input(The inline DC/DC circuit supplies power to the whole device,the ADC pin G33 is directly connected to the voltage divider circuit and can monitor the power input at any time) The current output is 1.5A, …
Portable Electric Pencil Sharpener Automatic Touch Switch School office Classroom
$24.29Laboratory Thermostatic DevicesAdd to cartFeatures– BLADE HOLDER:Provide a replacement blade holder additionally, rotate top safety cover to replace it, guarantee the durability of the pencil sharpener.– EFFICIENT:suitable for 2 AA batteries(not including), press down pencil to start work and sharpen automatically, work well for colored pencils, lead pencils and only need 3-5 seconds to close finish work. Completing a …
Portable Electric Pencil Sharpener Automatic Touch Switch School office ClassroomRead More
3pcs Red Light 2in1 22mm AC50-500V 0-100A Amp Voltmeter Ammeter Voltage Current Meter with CT Au23
$24.34Electronic Accessories & SuppliesAdd to cartDescription22MM AC50-500V 0-100A Digital LED Voltmeter Voltage Meter Indicator Light Ammeter Ampermeter Current Tester 2 In 1 With CTSpecificationsMaterial:Electrical componentsColor:Red22mm Digital DisplayVoltage Measuring Range:AC 50~500VCurrent Measuring Range:0~100ARated Frequency:50/60HzSize:29x51mmInstallation Diameter:20.3/0.8mmQuantity:1 SetPackage included3 x AC Voltmeter Ammeter 2 in 1 Indicator3 x Current Coil Transformer
5pcs 12 in 1 Transparent USB Tester DC Digital Voltmeter Amperemeter Voltagecurrent Meter Ammeter Detector Power Bank Charger indicator
$48.11Test & Measuring ModuleAdd to cartTechnical parametersVoltage measuring range:3.60V ~ 32.5 V Resolution precision:0.01 V Current measuring range:0.00A ~ 5.00 A Resolution precision:0.01 APower cumulative range:0 ~ 999999 WH Resolution precision:0.001 WhCapacity range:0 ~ 999999 mAH Resolution precision:0.001 AhTemperature:0 → ~ + 80 → Resolution precision:1 →D+ Voltage:0.000V ~ 2.999 V Resolution precision:0.001 VD- Voltage:0.000V ~ 2.999 V Resolution precision:0.001 …
3pcs 4S Single 3.7V 18650 Lithium Battery Capacity indicator Module Percent Power Level Tester LED Display Board
$6.75Test & Measuring ModuleAdd to cartFeatures1. Intelligent power display panel, tap the trigger switch to display, display automatically closed after 3 seconds (Note:if you need to keep the light , direct short-circuit switch)2. Static power consumption 2~3 mA, It’s negligible3. Power indication(The color of the lamp is green)U≈6.6V 25% led indicator is litU≈7V 50% led indicator is litU≈7.5V 75% led …
Reviews
There are no reviews yet.