Mini Jewelry Gas Mirco Torch Welding Brazing Cutting Tools
$109.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Material:Metal
Color:Multicolors
The highest welding temperature:1700℃
Interchangeable Torch Tip Length:43mm /1.69inch(appr.)
Length:205cm /80.71inch(appr.)
Features
Ideal for jewelry repair and construction, hobbyists, crafts, metal sculpture, glass blowing, and electronics repair and manufacturing. It can weld an unlimited range of materials.
Torch
The torch is designed to meet the requirements of industry for a small, lightweigh torch to weld, braze, heat and solder materials ranging from 3/16 Inch metal to ultra-fine wires. The six tips available provide a wide range of flame sizes allowing the versatility to perform many different tasks. Light weight construction and highly flexible hose provide pinpoint welding with maximum control.
Gases
The product can be used with most comonly available pressurized fuel gases:acetylene, hy-drogen, propanes, propylenes, natural gas or mapp with oxygen. The two smallest tips, sizes 1 and 2, can only be used satisfactorily with acetylene and hy-drogen fuel gases. CAUTION:When using natural gas, a minimum of 1 pound of pressure is required. Higher pressures are necessary for use with melting tips.
Tips
There are six tips available for the torch. SIZE 1, 2 AND 3 ARE FITTED WITHA SYNTHETIC SAPPHIRE to assure accurate gas flow because of the extraordinary small orifice size. There are also two different heating tips available, one for use with all gases and another specially designed for propane or natural gas. Refer to the pressure recommendation chart provided in this booklet for being used.
Repairs/Replacement of Hose
The torch hose is a special material designed to be compatible with the various fuel gases. The maximum length of hose used should not exceed 12 feet.
※EYE PROTECTION
Oxy-fuel flames produce hazardous rays of light(infrared/ultraviolet). An approved filter lens is required for eye protection when operation oxy-fuel equipment. Approved safety glasses are required in conjuncting with a filtered eye protection device.
※PROPER CLOTHING
Hazardous rays of light, molten metal, or sparks can cause severe burns to unprotected parts of the body. Appropriate protective clothing such as gloves, aprons, safety shoes, etc, are required when using oxy-fuel equipment.
WARNING:Keep all clothing and protective equipment free of oil and grease. These substances can ignite and will burn violently in the presence of pure of oxygen.
HOUSEKEEPING AND FIRE PROTECTION
The safety of any work area can be improved by following good housekeeping practices.
1. The work place must have a fireproof floor.
2. Work benches must have fireproof tops.
3. Nearby walls and unprotected flooring should be protected from sparks and hot metal by the use of heat resistant shields or other approved material.
4. An approved fire extinguisher must be kept and maintained (check regularly) in the work area.
5. The work site should be cleared of combustible materials. If such materials cannot be removed, they must be protected with fireproof covers and a fire watch should be established.
Package Included
1 x Mini Gas Torch
5 x Interchangeable Torch Tip
1 x English User Manual
Weight | 0.319 kg |
---|
Customers Also Viewed
300W Digital Amplifier Speaker Protection Board 2.1 Channel Relay Speaker Protection Module Boot Delay DC Protection
$15.30Relay ModuleAdd to cartFeatures1.With delay and DC protection (default 1.8V control, DC sensitivity can be adjusted)2. This common power DC protection board uses an optocoupler. Since the optocoupler has input and output isolation,3. Electrical signal transmission has the characteristics of unidirectionality, so it has good electrical insulation and anti-interference ability.4. Since the input end of the optocoupler belongs …
AB18 2SA1943/2SC5200 High Power 300W + 300W Dual Channel Class A/B Power Amplifier Board for Sound Speaker DIY
$125.17Amplifier BoardAdd to cartProduct description1. Using Japan imported original brand new 2SA1943/2SC52002. Electrolytic capacitor adopts imported electrolysis to ensure strong continuous power support.3. The resistor uses high-precision resistors, and the main circuit uses high-precision resistors with an accuracy of ÷ 1% to ensure a good signal-to-noise ratio for the whole machine.4. The PCB adopts 1.6mm thick double-sided sheet, …
5pcs DMP-L1 WiFi intelligent Lighting Module Built-in ESP ESP8285 WiFi Chip for Smart Home
$28.82Smart ModuleAdd to cartDescriptionThe core processor of DMP-L1 module adopts industrial chip ESP8285. The chip integrates an enhanced version of the Tensilica’s L106 Diamond Series 32-bit core processor in smaller size packages. ESP8285 has a complete Wi-Fi network function, which can be used independently from the controller. Its built-in cache memory greatly provides CPU performance.DMP-L1 module supports standard …
5pcs DMP-L1 WiFi intelligent Lighting Module Built-in ESP ESP8285 WiFi Chip for Smart HomeRead More
Wareshare 5.5 inch AMOLED HDMI Display Capacitive Touch Screen with Tempered Glass Support for NVIDIA Jetson Nano Raspberry Pi
$229.66Display ScreenAdd to cartDocumentsManual:Click here to openDatasheet:Click here to openSoftwarePanasoni SDFormatterWin32DiskImagerPuTTYOverviewThis product is a universal 5.5-inch HDMI display with 1080≠1920 ultra-clear resolution and a capacitive touch panel. Support for Raspberry Pi and various mini PCs, also as a computer monitor.Features5.5inch AMOLED, 1080×1920 resolution.Toughened glass capacitive touch panel.Supports popular mini PCs such as Raspberry Pi, as well as general …
5pcs 20x20x15mm DIY CPU IC Chip Heat Sink Extruded Cooler Aluminum Heat Sink
$4.36Electronic Accessories & SuppliesAdd to cartFeatureAluminum heat sinks for electronics, computers, electrical facilities, play a cooling effectSpecificationMaterials:AluminumSize:20*20*15mm (L*W*H)Color:SilverQty:5pcsPackage includes5 x CPU IC Chip Aluminum Heat Sink
5Pcs Yellow Backlight 1602 Character LCD Display Module
$24.89Display ScreenAdd to cartDescriptionLCD display module with yellow backlightWide viewing angle and high contrastBuilt-in industry standard HD44780 equivalent LCD controllerCommonly used in:copiers, fax machines, laser printers, industrial test equipment,networking equipment such as routers and storage devicesLCM type:CharactersCan display 2-lines X 16-charactersOperate with 5V DCModule dimension:80mm x 36mm x 12mmViewing area size:64.5mm x 16mmPackage included5 X LCD display module
Bathtub Caddy Bamboo Bath Tub Holder Bathroom Tray Glass Book Reading Rack Stand
$106.76FoamAdd to cartSpecificationMaterial:BambooColor:WoodSize:(L)X(W)X(H)105X22X4cm/41.34inchX8.66inchX1.57inch(appr.)Features1. Constructed from durable bamboo and metal supporting frame in excellent craftsmanship for many years use.2. Varnish processing on surface, lightweight and easy to operate.3. Books can be held with metal rack stably for reading when bathing.4. Books, phone, towl, and food can be placed on it for convenient reach.5. Its length is adjustable between …
Bathtub Caddy Bamboo Bath Tub Holder Bathroom Tray Glass Book Reading Rack StandRead More
Reviews
There are no reviews yet.