Mini Jewelry Gas Mirco Torch Welding Brazing Cutting Tools
$109.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Material:Metal
Color:Multicolors
The highest welding temperature:1700℃
Interchangeable Torch Tip Length:43mm /1.69inch(appr.)
Length:205cm /80.71inch(appr.)
Features
Ideal for jewelry repair and construction, hobbyists, crafts, metal sculpture, glass blowing, and electronics repair and manufacturing. It can weld an unlimited range of materials.
Torch
The torch is designed to meet the requirements of industry for a small, lightweigh torch to weld, braze, heat and solder materials ranging from 3/16 Inch metal to ultra-fine wires. The six tips available provide a wide range of flame sizes allowing the versatility to perform many different tasks. Light weight construction and highly flexible hose provide pinpoint welding with maximum control.
Gases
The product can be used with most comonly available pressurized fuel gases:acetylene, hy-drogen, propanes, propylenes, natural gas or mapp with oxygen. The two smallest tips, sizes 1 and 2, can only be used satisfactorily with acetylene and hy-drogen fuel gases. CAUTION:When using natural gas, a minimum of 1 pound of pressure is required. Higher pressures are necessary for use with melting tips.
Tips
There are six tips available for the torch. SIZE 1, 2 AND 3 ARE FITTED WITHA SYNTHETIC SAPPHIRE to assure accurate gas flow because of the extraordinary small orifice size. There are also two different heating tips available, one for use with all gases and another specially designed for propane or natural gas. Refer to the pressure recommendation chart provided in this booklet for being used.
Repairs/Replacement of Hose
The torch hose is a special material designed to be compatible with the various fuel gases. The maximum length of hose used should not exceed 12 feet.
※EYE PROTECTION
Oxy-fuel flames produce hazardous rays of light(infrared/ultraviolet). An approved filter lens is required for eye protection when operation oxy-fuel equipment. Approved safety glasses are required in conjuncting with a filtered eye protection device.
※PROPER CLOTHING
Hazardous rays of light, molten metal, or sparks can cause severe burns to unprotected parts of the body. Appropriate protective clothing such as gloves, aprons, safety shoes, etc, are required when using oxy-fuel equipment.
WARNING:Keep all clothing and protective equipment free of oil and grease. These substances can ignite and will burn violently in the presence of pure of oxygen.
HOUSEKEEPING AND FIRE PROTECTION
The safety of any work area can be improved by following good housekeeping practices.
1. The work place must have a fireproof floor.
2. Work benches must have fireproof tops.
3. Nearby walls and unprotected flooring should be protected from sparks and hot metal by the use of heat resistant shields or other approved material.
4. An approved fire extinguisher must be kept and maintained (check regularly) in the work area.
5. The work site should be cleared of combustible materials. If such materials cannot be removed, they must be protected with fireproof covers and a fire watch should be established.
Package Included
1 x Mini Gas Torch
5 x Interchangeable Torch Tip
1 x English User Manual
Weight | 0.319 kg |
---|
Customers Also Viewed
5pcs TS-300B Turbidity Sensor Detection Module Water Quality Tester Washing Machine Turbidity Transduce
$43.93Sensor & Detector ModuleAdd to cartPrincipleTurbidity sensor TS-300B measures the turbidity (counter of suspended matter) in the wash water. Based on the optical principle, the sensor uses the light-emitting diode and phototransistor to receive the specific wavelength to measure the opacity or other substances of dirty water. concentration. By using phototransistors and light-emitting diodes, the light emitted by the sensor …
3Pcs USB Fan Speed Controller Module Reducing Noise Multi-stall Adjustment Governor DC 4-12V
$20.74Motor PWM Speed ControllerAdd to cartFeatures– USB Fan Air Conditioner – Strong winds and weak wind adjust freely – Stepless Speed Regulation – Suitable for the very common 5.0V USB fan on the market Regulation PrincipleThe non-adjustable fan is a 5V direct fan motor,while the two-stall fan is the interior has a step-up circuit board,when placed in the second gear,the …
5pcs JDY-08 BLE bluetooth 4.0 Serial Port Wireless Module Low Power Master-slave Support Airsync i Beacon
$45.12Smart ModuleAdd to cartFeaturesJDY-08 transparent transmission module is based on bluetooth 4.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, large transmission power is 0db, large transmission distance is 80 meters, TICC2541 chip design is adopted, and users can modify device name by AT command. , service UUID, transmit power, pairing password and other …
ADC Module ADS1100 for Analog Signal Capture Converter Compatible M5StickC ESP32 Mini IoT Development Board Fi
$14.74Converter BoardAdd to cartnull Description ADC_HAT is another type of C-HAT specifically design for M5StickC controller. Same as ADC unit, this is an ADC converter component for stickc. Packed with an ADC converter chip ADS1100, which is a fully differential, 16-bit, self-calibrating, A/D converter. Extremely easy to design with and configure, the ADS1100 allows you to obtain precise …
5pcs Mini MP1584EN DC-DC BUCK Adjustable Step Down Module 4.5V-28V input 0.8V-20V Output
$8.94Power Supply ModuleAdd to cartSpecificationsModel:MP1584Name:DC-DC step-down moduleInput Voltage:4.5V ~ 28VOutput voltage:0.8V ~ 20VOutput Current:3A (Max)Conversion efficiency:96% (maximum)Output RippleSwitching frequency:1.5MHz (highest) typically 1MHzOperating Temperature:-45°C ~ +85°CSize:22mm * 17mm (L * W )Application areas:DIY mobile power, monitor power supply, power buggies, camera power supply, car power, communications equipment supply,etc.Packge included5 x Step Down Module
LILYGO TTGO T-Koala ESP32 WiFi and bluetooth Module 4MB Development Board Based on ESP32-WROOM-32 Micro USB
$26.23Smart ModuleAdd to cartFeatureEspressif official ESP32-WROOM-32 moduleLatest ESP32 version:REV14MB FLASHLithium battery interface, 500mA maximum charging currentCompatible with , MicroPythonDefault firmware:latest MicroPythoTechnical specificationsMicrocontroller:ESP-32Board power supply:(USB) 5VSupport battery:Lipo Battery 3.7VWorking voltage:3.3VFlash:4 MbytesLength:78 mmWidth:27 mmWeight:7.8 gramsPackage includes1 x ESP32 WiFi&bluetooth Broad2 x Pin
Reviews
There are no reviews yet.