Mini Jewelry Gas Mirco Torch Welding Brazing Cutting Tools
$109.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Material:Metal
Color:Multicolors
The highest welding temperature:1700℃
Interchangeable Torch Tip Length:43mm /1.69inch(appr.)
Length:205cm /80.71inch(appr.)
Features
Ideal for jewelry repair and construction, hobbyists, crafts, metal sculpture, glass blowing, and electronics repair and manufacturing. It can weld an unlimited range of materials.
Torch
The torch is designed to meet the requirements of industry for a small, lightweigh torch to weld, braze, heat and solder materials ranging from 3/16 Inch metal to ultra-fine wires. The six tips available provide a wide range of flame sizes allowing the versatility to perform many different tasks. Light weight construction and highly flexible hose provide pinpoint welding with maximum control.
Gases
The product can be used with most comonly available pressurized fuel gases:acetylene, hy-drogen, propanes, propylenes, natural gas or mapp with oxygen. The two smallest tips, sizes 1 and 2, can only be used satisfactorily with acetylene and hy-drogen fuel gases. CAUTION:When using natural gas, a minimum of 1 pound of pressure is required. Higher pressures are necessary for use with melting tips.
Tips
There are six tips available for the torch. SIZE 1, 2 AND 3 ARE FITTED WITHA SYNTHETIC SAPPHIRE to assure accurate gas flow because of the extraordinary small orifice size. There are also two different heating tips available, one for use with all gases and another specially designed for propane or natural gas. Refer to the pressure recommendation chart provided in this booklet for being used.
Repairs/Replacement of Hose
The torch hose is a special material designed to be compatible with the various fuel gases. The maximum length of hose used should not exceed 12 feet.
※EYE PROTECTION
Oxy-fuel flames produce hazardous rays of light(infrared/ultraviolet). An approved filter lens is required for eye protection when operation oxy-fuel equipment. Approved safety glasses are required in conjuncting with a filtered eye protection device.
※PROPER CLOTHING
Hazardous rays of light, molten metal, or sparks can cause severe burns to unprotected parts of the body. Appropriate protective clothing such as gloves, aprons, safety shoes, etc, are required when using oxy-fuel equipment.
WARNING:Keep all clothing and protective equipment free of oil and grease. These substances can ignite and will burn violently in the presence of pure of oxygen.
HOUSEKEEPING AND FIRE PROTECTION
The safety of any work area can be improved by following good housekeeping practices.
1. The work place must have a fireproof floor.
2. Work benches must have fireproof tops.
3. Nearby walls and unprotected flooring should be protected from sparks and hot metal by the use of heat resistant shields or other approved material.
4. An approved fire extinguisher must be kept and maintained (check regularly) in the work area.
5. The work site should be cleared of combustible materials. If such materials cannot be removed, they must be protected with fireproof covers and a fire watch should be established.
Package Included
1 x Mini Gas Torch
5 x Interchangeable Torch Tip
1 x English User Manual
Weight | 0.319 kg |
---|
Customers Also Viewed
1000W 220V Electric Non-Stick Cake Pan Pie Maker Iron Machine Baking Snack Maker for Kids
$74.91Solar CollectorsAdd to cartElectric Non-Stick Cake Machine Baking Snack Maker For Kids 1000w 220vSpecificationsMaterial:Aluminium, PlasticColor:YellowVoltage:220vPower:1000wSize:24*20*9.5cmFeatures– The temperature can’t be set, it’s automatic temperature control design.– It’s easy and very convenient to use, just a few minutes.– The lid is active in order to make the cake more fluffy.Package included1 X Cake Machine
100pcs PFM Control DC-DC 0.9V-5V To USB 5V Boost Step Up Power Supply Module
$99.90Boost & Buck ModuleAdd to cartDescriptionMini PFM ControlOn-board input voltage indicatorHigh conversion efficiency, maximum to 96%Any DC voltage input 0.9V ~ 5V, output 5V DC voltage can be stable, with two AA batteries input to the output current of 500-600MA, single AA battery power supply output current about 200MAOn-board USB female, can supply power directly to the USB interfaceSmall dimensionSpecificationInput …
100pcs PFM Control DC-DC 0.9V-5V To USB 5V Boost Step Up Power Supply ModuleRead More
TPA3116 Subwoofer Amplifier Board 2.1 Channel High Power bluetooth 4.2 Audio Amplifiers DC12V-24V 2*50W+100W Amplificador with Shell
$54.90Amplifier BoardAdd to cartProduct description1. This is a DC-powered 12-24V power supply, using TI’s TPA3116D2 high-performance digital power amplifier chip as the core, one to do parallel bridged bass channel power amplification output, one to do left and right channel power amplification output. support 100W (bass channel) + 50W (left channel) + 50W (right channel) three-channel output.2. Support …
EleksMaker EleksLaser-A3 Pro 5500mW Laser Engraving Machine CNC Laser Printer
$1,239.29Laser Engraving MachineAdd to cartNotice1. Now we all supply the new version of EleksMaker A3-5500 as the pictures shown. (New version means the improved appearance of machine, while you can know what the old version looks like via the first video above.)2. The frame joint is upgraded and will be easier to assemble. (Remove corner joints and add rubber …
EleksMaker EleksLaser-A3 Pro 5500mW Laser Engraving Machine CNC Laser PrinterRead More
10pcs DC 3V-5V 20mA Rain Water Level Sensor Module Detection Liquid Surface Depth Height for Geekcreit for Arduino – products that work with official Arduino boards
$7.60Power Supply ModuleAdd to cartDescriptionWater Sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level. Easy to complete water to analog signal conversion and output analog values can be directly read development board of FOR …
3pcs JUWEI 5V 10W 2 Switch USB Aging Discharge Loader 3 Kinds Current Test Load Power Resistor
$13.41Other Module BoardAdd to cartDescriptionRated power:10WVoltage:5VA designed according to the principle of ohm’s law and through the resistor in parallel through a different switch, can produce 3 kinds of resistance of a new USB electronic load resistance discharge, when all the switch opens, is 2.2 ohm/10W, 4.7 ohm/10W, 2 kinds of resistance in parallel at the same time, in …
Reviews
There are no reviews yet.