Aluminum DIY Mechanical Robot Arm Claw for 6DOF 8 Degrees of Freedom Mechanical Robot Arm
$36.27
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
The 6 dof 8 degrees of freedom mechanical robot arm claw kit () for your reference.
Specifications
– Paw material:hard aluminum
– Paw weight:about 40g (excluding steering gear)
– Paw maximum angular spacing:about 86mm
– Paw overall length:about 83mm (claws closed the longest overall length)
– The overall width of the claw 1:about 150mm (the maximum overall width of the claw when opened)
– Paw overall width 2:about 55mm (claws closed the largest overall width)
– Paw overall thickness:about 54mm (with the largest overall thickness of the steering gear paw)
– Suit for dt3316 servo.
Note
– The color will send randomly.
– Due to different producing batches, product details might be a little different. If you minding the difference, please understand.
Package Included
1 x Mechanical Claw( not included servo)
| Weight | 0.082 kg |
|---|
Related products
5PCS Mini Electronic Tracking Robot Car DIY Kit with Reduction Motor
$81.65Smart Robot & Solar PanelAdd to cartThe assembly stepsStep 1:Welding circuitElectric welding part is simpler, welding sequence according to the principle of component level from low to high, the first welding eight resistance, is important to use multimeter to confirm resistance is correct, D4, D5 R13 R14 can temporarily not welding, integrated circuit chips can temporarily not insertedStep 2:Mechanical assemblyThe red …
5PCS Mini Electronic Tracking Robot Car DIY Kit with Reduction MotorRead More
5Pcs/Pack KittenBot 23×12.2x29mm SG90 9g Mini Servo with 25cm Wire for Smart Robot Car
$29.73Smart Robot & Solar PanelAdd to cartThe servo has three lines defined, respectively– Red Positive:VCC 4.8-7.2V– Brown cathode:GND– Orange signal line:pulse inputParameters1. Product Name:KittenBot 9g Small Servo2. Weight:about 9g3. Size:about 23×12.2x29mm4. No-load operation speed:0.12 seconds/60 degrees (4.8V); 0.10 seconds/60 degrees (6.0V)5. Torque:1.6kg·cm (4.8V)6. Use temperature:-30~+60 degrees Celsius7. Dead zone setting:5 microseconds8. Operating voltage:3.5V~6V9. Attachment:Three kinds of functional rudder angle, fixing screw, …
5Pcs/Pack KittenBot 23×12.2x29mm SG90 9g Mini Servo with 25cm Wire for Smart Robot CarRead More
Yahboom UNO R3 Robot Drive Expansion Board Compatible with Arduino UNO Robot Drive Expansion Board
$40.89Smart Robot & Solar PanelAdd to cartTutorial:https://www.yahboom.net/study/UNO_motor_driverDescriptionThis expansion board is specially designed for the Uno board and can be plugged directly into the Uno board without a cable. Equipped with 4 motor interfaces, 4 servos interface, wifi camera interface, IIC interface, various sensor sockets, etc. It also expand all the pins of Uno board, which is convenient for users to connect …
Customers Also Viewed
3pcs 9V 1A Power Supply Adapter US Plug 2-Flat-Pin for
$19.71Electronic Accessories & SuppliesAdd to cartDescription 2-flat-pin US plug for Works with most devices that use a 9V adaptor and less than 1A of power Specification Color:Black Input:100~240V AC, 50/60Hz Output:9V DC, 1A Connector size:5.5 x 2.1mm Cable length:90cm Dimensions:2.91 x 1.57 x 1.06inch (7.4 x 4 x 2.7cm) Package included 3 x 9V 1A power adapter
Prototype Board 400 Hole Breadboard + 65pcs Breadboard Jump Cable
$10.92Electronic Accessories & SuppliesAdd to cartPrototype Board 400 Hole Breadboard + 65pcs Breadboard Jump CableFeatureThis is the Prototype board Electronic deck + 65pcs Breadboard tie line Wire cable.Ideal for high frequency and low noise circuitsDimension:8.3cm x 5.5cm x1.0cmWire size:Suitable for 20-29 AWG(0.3-0.8mm) wiresJump Cable Wires65Pcs Mixed Color Male to Male Solderless FlexibleBreadboard Jump Cable WiresThis a high quality 65 piece …
Prototype Board 400 Hole Breadboard + 65pcs Breadboard Jump CableRead More
20pcs CH340 3.3V/5.5V USB To TTL Converter Module CH340G STC Download Module Upgrade Brush Board
$35.30Converter BoardAdd to cartFeaturesBuilt-in USB to TTL Transfer chip.Designed to be used for USB to TTL electronic projects.TTL interface output, easy to connect to your MCU.Status LED.Dual 3.3V and 5V Power output, work with 3.3v and 5v target device.Size:55mm x 16mmServer 2008/Win7/Win8 32 bits / 64 bits1. Support WINDOWS 98 / ME / 2000 / XP/Server 2003/VISTA /2. …
140 DC 12V LED PIR Body infrared Auto Motion Sensor Switch on/off Strip
$13.11Electronic Accessories & SuppliesAdd to cartFeatureHigh sensitivity, easy for installing.Gray cable is positive electrode.White cable is negative electrode.Widely used on the Motion-activated lighting, LED strips security system, automatic sensory device and more.The sensor is not waterproof; don’t install it in any place with heavy water and humidity.Specification-Switch mode:PIR sensor-Color:Black+White-Material:Plastic-Size:As the picture shows-Operating voltage:3-12v-Load current:2A-Detecting range:140°-Detecting distance:1~3m-Delay time:15sAttention1. Don’t install in …
140 DC 12V LED PIR Body infrared Auto Motion Sensor Switch on/off StripRead More
Reviews
There are no reviews yet.