thermoelectric Generator SP1848-27145 40*40MM High thermal Conductivity for industrial Equipment Heat Energy Conversion Power
$6.84
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
The output power in thermoelectric performance test
Temperature difference/→
Resistance
20
30
40
50
60
80
2
0.0459
0.099
0.1866
0.2548
0.4507
0.5999
3
0.0508
0.1033
0.2067
0.2808
0.4988
0.681
5
0.0441
0.1033
0.2028
0.2737
0.4836
0.6811
7
0.0386
0.0916
0.1846
0.2607
0.4528
0.6474
Output power under variable load
Temperature difference/→
Resistance
0.5
1
1.5
2
2.5
3
20
0.0227
0.0342
0.0405
0.0459
0.0455
0.0508
30
0.0499
0.0756
0.0895
0.099
0.104
0.1033
40
0.0916
0.1417
0.169
0.1866
0.201
0.2067
Temperature difference/→
Resistance
5
6
7
8
9
10
20
0.0441
0.042
0.0386
0.04
0.0356
0.0369
30
0.1033
0.103
0.0916
0.0872
0.0819
0.0846
40
0.2028
0.1962
0.1846
0.1683
0.1621
0.1526
Output power under variable load conditions
Cold end/→
Hot end/→
10
20
30
40
30
0.078192
40
0.178462
0.089086
50
0.32891
0.18813
0.064986
0.023112
60
0.500059
0.326759
0.157332
0.081107
70
0.738641
0.508002
0.298401
0.186028
80
1.007529
0.724403
0.493534
0.308973
90
1.32805
0.993603
0.7091
0.476235
100
1.64804
1.312761
0.97671
0.692804
110
2.102329
1.624719
1.247846
0.958769
120
2.517268
1.954394
1.599027
1.22758
130
2.992686
2.32714
1.947085
1.550767
140
3.417593
2.726115
2.297209
1.984817
Note
The experimental data in this group uses a matching resistance of 4.21 ohms to achieve maximum output power.
The side with words is cooling, and the side without words is heat dissipation.
SP1848-27145 parameters are as follows
Temperature difference of 20 degrees:open circuit voltage 0.97V, generating current:225MA
Temperature difference of 40 degrees:open circuit voltage 1.8V, generating current:368MA
Temperature difference of 60 degrees:open circuit voltage 2.4V, generating current:469MA
Temperature difference of 80 degrees:open circuit voltage 3.6V, generating current:558MA
Temperature difference of 100 degrees:open circuit voltage 4.8V, generating current:669MA
The above values are for reference only. There will be loss of current when wiring and booster board in actual use.
Because this product is one piece and a ceramic body, it transfers heat very quickly. The temperature difference between the cold and hot ends needs to be studied and controlled.
Thermoelectric parameters
Thermoelectromotive force (a):>190≠┢V/→
Conductivity (┮):850∥1250┯-1.cm-1
Thermal conductivity (K):15∥16≠10-3-W/→cm
Merit value (Z):2.5∥3.0≠10-3W/→
Package includes
1 x Thermoelectric chip
Weight | 0.021 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.