thermoelectric Generator SP1848-27145 40*40MM High thermal Conductivity for industrial Equipment Heat Energy Conversion Power
$6.84
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
The output power in thermoelectric performance test
Temperature difference/→
Resistance
20
30
40
50
60
80
2
0.0459
0.099
0.1866
0.2548
0.4507
0.5999
3
0.0508
0.1033
0.2067
0.2808
0.4988
0.681
5
0.0441
0.1033
0.2028
0.2737
0.4836
0.6811
7
0.0386
0.0916
0.1846
0.2607
0.4528
0.6474
Output power under variable load
Temperature difference/→
Resistance
0.5
1
1.5
2
2.5
3
20
0.0227
0.0342
0.0405
0.0459
0.0455
0.0508
30
0.0499
0.0756
0.0895
0.099
0.104
0.1033
40
0.0916
0.1417
0.169
0.1866
0.201
0.2067
Temperature difference/→
Resistance
5
6
7
8
9
10
20
0.0441
0.042
0.0386
0.04
0.0356
0.0369
30
0.1033
0.103
0.0916
0.0872
0.0819
0.0846
40
0.2028
0.1962
0.1846
0.1683
0.1621
0.1526
Output power under variable load conditions
Cold end/→
Hot end/→
10
20
30
40
30
0.078192
40
0.178462
0.089086
50
0.32891
0.18813
0.064986
0.023112
60
0.500059
0.326759
0.157332
0.081107
70
0.738641
0.508002
0.298401
0.186028
80
1.007529
0.724403
0.493534
0.308973
90
1.32805
0.993603
0.7091
0.476235
100
1.64804
1.312761
0.97671
0.692804
110
2.102329
1.624719
1.247846
0.958769
120
2.517268
1.954394
1.599027
1.22758
130
2.992686
2.32714
1.947085
1.550767
140
3.417593
2.726115
2.297209
1.984817
Note
The experimental data in this group uses a matching resistance of 4.21 ohms to achieve maximum output power.
The side with words is cooling, and the side without words is heat dissipation.
SP1848-27145 parameters are as follows
Temperature difference of 20 degrees:open circuit voltage 0.97V, generating current:225MA
Temperature difference of 40 degrees:open circuit voltage 1.8V, generating current:368MA
Temperature difference of 60 degrees:open circuit voltage 2.4V, generating current:469MA
Temperature difference of 80 degrees:open circuit voltage 3.6V, generating current:558MA
Temperature difference of 100 degrees:open circuit voltage 4.8V, generating current:669MA
The above values are for reference only. There will be loss of current when wiring and booster board in actual use.
Because this product is one piece and a ceramic body, it transfers heat very quickly. The temperature difference between the cold and hot ends needs to be studied and controlled.
Thermoelectric parameters
Thermoelectromotive force (a):>190≠┢V/→
Conductivity (┮):850∥1250┯-1.cm-1
Thermal conductivity (K):15∥16≠10-3-W/→cm
Merit value (Z):2.5∥3.0≠10-3W/→
Package includes
1 x Thermoelectric chip
Weight | 0.021 kg |
---|
Customers Also Viewed
3 Axis GRBL USB Driver offline Controller Control Module LCD Screen w/ Controller Board SD Card for CNC 1610 2418 3018 Wood Router Laser Engraving Machine
$93.14Control BoardAdd to cartDescriptionThis offline controller w/ controller board is designed for the use of Mini CNC router 1610/2418/3018 and even with more advanced function of tool set, limit switch supportive, Laser supportive; Offline and Bluetooth supportive.SpecificationUSB Cable Length:20cmFirmware:GRBL 08, 09, 1.1 and so on Input Voltage:DC 7V- 36VApplicable CNC Router:3 Axis CNC router 1610; 2418; 3018Features1. Support …
20Pcs PS2 Game Joystick Switch Sensor Module
$34.87Other Module BoardAdd to cart20Pcs PS2 Game Joystick Module For Description This is PS2 game joystick module for Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin. …
Ebyte E07-M1101D-TH 10dBm Spring Antenna 433MHz CC1101 Wireless Transceiver SPI 433mhz RF Module
$9.18Smart ModuleAdd to cartSpecificationsInterface:SPIPower:10dBmDistance:520mSupply voltage:1.9 ~ 3.6V DCFrequency:433MHz(387 ~ 464MHz)RF Parameter:Value:RemarkWorking frequency:387~464 MHz:Default:433MHz (26MHz oscillator)Transmitting power:10 dBm:Max. Power (10mW)Receiving sensitivity:-108 dBm:Air data rate:0.6kbpsAir data rate:0.6k~500kbps:Default:0.6kbpsTest distance:600m:In open and clear air, with maximum power, 5dBi antenna gain, height of 2m, air data rate:0.6kbpsHardware Parameter:Value:RemarkSize15 * 30 mm Without Spring antennaAntenna typeSpring antenna Communication interfaceSPI PackageDIP Electronic parameter:Min.:Typ.:Max.:Unit:ConditionPower supply:1.8:3.3:3.6:VCommunication level:1.8:3.3:3.6:VTransmitting …
Waveshare IS62WV51216BLL SRAM RAM Module Storage Memory Board
$28.42Expansion Board & ShieldAdd to cartFeatureFunction:SRAM IS62WV51216BLL (8M Bit), can be directly connected to the corresponding FSMC interface of the Open series development board, and the external expansion interface supports external expansion of SRAM, LAN, USB HOST, etc.Typical application:SRAM external expansion storageMain resources:IS62WV51216BLL (8M Bit), control interfacePackage includes1 x IS62WV51216BLL SRAM Board
3 Megapixel Optical Zoom Cam Module Fixed Focus 3MP OV3660 Camera Module FOV 79
$15.30Other Module BoardAdd to cart>>>Manual:Click here to openSpecificationsModel No.:HBVCAM-3M1917Model Size:30mm ≠ 25mm ≠ 5.0mm÷0.2MMTemperature (Operation):-30C to 70CTemperature (Stable Image):0C to 50CAssembly technique:SMT (ROSH)Focus:FixedObject distance:30CM-infinityResolution:800LW/PH (Center)PCB printing ink:Blackinterface:USB 2.0Power supply:USB bus powersupply voltage:DC 5V÷5%Maximum Power consumption:600WOperating system request:Win XP/win 7,8 / vista /android 4.0/ mac /Linuxwith uvc Sensor:OV3660 (1/5” )Seneor Package:CSP,Bare DieMaximum resolution:2048*1536Sensitivity:670mV /(lux-sec)Pixel Size:1.4┢m x 1.4┢m Maximum Image Transfer …
3 Megapixel Optical Zoom Cam Module Fixed Focus 3MP OV3660 Camera Module FOV 79Read More
Hall Effect Magnetic Sensor Module DC 5V
$4.36Sensor & Detector ModuleAdd to cartDescription This is Hall Effect magnetic sensor module DC 5V for Brand:KEYES Model:KY-003 Magnetic, speed, gap induction Suitable for DIY project Working voltage:DC 5V Material:PCB Feature Small size and high sensitivity. response temperature and good performance. Precision and high reliability 3144 Series Hall principle of Hall effect switch IC, using technology to produce magnetic semiconductor …
Geekcreit Portable Mini Automatic Spot Welding Machine Control Board 12V/5.6V Portable Lithium Battery Spot Welding Circuit Board Accessories
$40.49Driver ModuleAdd to cartInstructions for use of automatic spot welding control board1. Power requirements:In 12V mode, voltage input is 7-15V (12V recommended), in 5.6V capacitor mode, voltage supports 3.7-6V (recommended 5.6V), current requirements:can output actual current 120-360A2. Button function:switch between 1 power level-2 power level-3 power level-4 power level after long press for 3 seconds3. The red light …
Reviews
There are no reviews yet.