thermoelectric Generator SP1848-27145 40*40MM High thermal Conductivity for industrial Equipment Heat Energy Conversion Power
$6.84
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
The output power in thermoelectric performance test
Temperature difference/→
Resistance
20
30
40
50
60
80
2
0.0459
0.099
0.1866
0.2548
0.4507
0.5999
3
0.0508
0.1033
0.2067
0.2808
0.4988
0.681
5
0.0441
0.1033
0.2028
0.2737
0.4836
0.6811
7
0.0386
0.0916
0.1846
0.2607
0.4528
0.6474
Output power under variable load
Temperature difference/→
Resistance
0.5
1
1.5
2
2.5
3
20
0.0227
0.0342
0.0405
0.0459
0.0455
0.0508
30
0.0499
0.0756
0.0895
0.099
0.104
0.1033
40
0.0916
0.1417
0.169
0.1866
0.201
0.2067
Temperature difference/→
Resistance
5
6
7
8
9
10
20
0.0441
0.042
0.0386
0.04
0.0356
0.0369
30
0.1033
0.103
0.0916
0.0872
0.0819
0.0846
40
0.2028
0.1962
0.1846
0.1683
0.1621
0.1526
Output power under variable load conditions
Cold end/→
Hot end/→
10
20
30
40
30
0.078192
40
0.178462
0.089086
50
0.32891
0.18813
0.064986
0.023112
60
0.500059
0.326759
0.157332
0.081107
70
0.738641
0.508002
0.298401
0.186028
80
1.007529
0.724403
0.493534
0.308973
90
1.32805
0.993603
0.7091
0.476235
100
1.64804
1.312761
0.97671
0.692804
110
2.102329
1.624719
1.247846
0.958769
120
2.517268
1.954394
1.599027
1.22758
130
2.992686
2.32714
1.947085
1.550767
140
3.417593
2.726115
2.297209
1.984817
Note
The experimental data in this group uses a matching resistance of 4.21 ohms to achieve maximum output power.
The side with words is cooling, and the side without words is heat dissipation.
SP1848-27145 parameters are as follows
Temperature difference of 20 degrees:open circuit voltage 0.97V, generating current:225MA
Temperature difference of 40 degrees:open circuit voltage 1.8V, generating current:368MA
Temperature difference of 60 degrees:open circuit voltage 2.4V, generating current:469MA
Temperature difference of 80 degrees:open circuit voltage 3.6V, generating current:558MA
Temperature difference of 100 degrees:open circuit voltage 4.8V, generating current:669MA
The above values are for reference only. There will be loss of current when wiring and booster board in actual use.
Because this product is one piece and a ceramic body, it transfers heat very quickly. The temperature difference between the cold and hot ends needs to be studied and controlled.
Thermoelectric parameters
Thermoelectromotive force (a):>190≠┢V/→
Conductivity (┮):850∥1250┯-1.cm-1
Thermal conductivity (K):15∥16≠10-3-W/→cm
Merit value (Z):2.5∥3.0≠10-3W/→
Package includes
1 x Thermoelectric chip
Weight | 0.021 kg |
---|
Customers Also Viewed
3Pcs CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor Module
$24.62Sensor & Detector ModuleAdd to cart3Pcs CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor ModuleDescriptionCJMCU-219 module is a with I2C interface Bidirectional current / power monitor integrated circuit (IC), and further expand the energy-saving electronic products TI camp. INA219 with the industry’s highest accuracy and smallest size, not only to monitor the voltage drop across a shunt resistor on …
3Pcs CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor ModuleRead More
GDCPH 16V83F Super Farah Capacitor Automotive Electronic Rectifier 2.7v500F Screw Hole Large Capacity Capacitor
$90.34Electronic Accessories & SuppliesAdd to cartDescriptionThis product can be used in electronic devices such as:RAM, smart three-meter, motor drive, clock circuit, toys, CMOS power failure protection, digital camera, hand-cranked rechargeable flashlight, PDA and other fields as a backup power supply.SpecificationBrand:GDCPHModel:16V83FCapacity:83FRated voltage:16 VSize:231*35*65mmPitch:7mmPackage included1 x capacitor
5pcs PWM DC Motor Governor 5V-16V 10A Speed Switch LED Dimmer Speed Controller
$22.64Motor PWM Speed ControllerAdd to cartParameterMaximum voltage:16VMinimum voltage:5VContinuous current:10AShort circuit maximum current:20A (less than 10 seconds)Speed control mode:PWM stepless speed regulation, can also be used to adjust the lightControl mode:speed control potentiometer (clockwise open, continue to rotate clockwise from 1% to 99%)Duty cycle:0%-99% (0% position is the leftmost state of the potentiometer).When the current is on, 0.002A (there is no …
5pcs PWM DC Motor Governor 5V-16V 10A Speed Switch LED Dimmer Speed ControllerRead More
3pcs 7W 9W 12W 15W LED Non Isolated Modulation Light External Driver Power Supply AC90-265V Constant Current Thyristor Dimming Module
$17.33Driver ModuleAdd to cartSpecificationsInput voltage:AC90-265VOutput voltage:DC21-48VOutput current:300mA(adjustable)Product size:68*34*22mmWorking temperature:Ta:50 TC:75Efficiency:≥80%Power factor:0.6Product application:spotlight PAR light / bulb light / candle light / etc.Package Included3 x 7W 9W 12W 15W LED Non Isolated Modulation Light External Driver
5Set Mini Emergency Hand-cranked Dynamotor Charger Portable Hand-cranked Generator 3V 5V for Diy Electronic Production with Clip Lines
$37.08Electronic Accessories & SuppliesAdd to cartDescriptionUnderstand the gear’s speed-increasing transmission conversion and the principle of electric energy generation, and cultivate the manual and brain skills, which is very suitable for manual classes in schools or for adults and children to play together!When shaking slowly for one second or more, the generating voltage can easily reach 3V, and it is easy …
APPJ Single End 6J1 + FU32 Tube Amplifier Board Class A Power AMP Hifi Vintage Audio Assembled Board
$182.24Amplifier BoardAdd to cartNew update:The appearance is updated from March 6, 2021.SpecificationsAssembled, solder freeDriver tubes:6J1x2PCSPower tubes:FU32x2PCSPower output:3W+3W @8ohmFrequency response:30-40KHz(+-1dB)Input sensitivity:550mVSignal-to noise-ratio:-80dB/3WInput power:85-264VACPower consumption:40WInput impedance:10K ohmOutput impedance:16ohm,8ohm,6ohm,4ohmPackage dimension:12*21*17cmPackage weigth:1.5KGNoteThe self-made shell must be opened with sufficient heat dissipation holes, preferably 50% of the shell area, at least 30%, otherwise it will affect the service life.Package Included1 x End 6J1 …
Caturda C2707 4Channel I2C interface Current Voltage Power Monitoring Module for Raspberry Pi
$39.03Raspberry Pi & Orange PiAdd to cartSpecificationsCurrent and power monitor for Raspberry Pi, 4 channels, can monitor the current, voltage, power and voltage across the sampling resistor through the I2C/SMBus interfaceFeaturesRaspberry Pi 40pin GPIO Interface, fit for Raspberry Pi all SeriesSupport 4 Channel I2C/SMBus CommunicationOnboard 1ohm 1% Resistance.Monitor 3.2A Bidirectional current12bit ADC Measuring 0-26V VoltageWorking Voltage:3.3V/5VInterface:I2C/SMBusResistance:1ohm 1%Voltage Range:0-26VCurrent:÷3.2ASize:65mmx30mmPackage Included1* Monitoring Module
Reviews
There are no reviews yet.