Broadband Antenna EMC EMI Antenna Directional Antenna 290M-1.1G EMI Rectification
$106.54
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
The main parameters of SR_LPD001 (290M-1.1G)
Working frequency band:290M-1.1G
Dimensions:330mmX432mm
Power:less than 5W
Weight:150g
The way to improve the sensitivity
1. This antenna is directional (the advantage is that it can reduce the influence of spatial clutter), and the directional angle is about 30 degrees, so that the smaller end of the antenna is aimed at the DUT.
2. The radio wave has a polarization direction. Try placing the antenna horizontally and vertically.
3. Reduce the distance between the antenna and the DUT.
4. Rotate the DUT to find the part with the largest radiation leakage.
5. Some spectrum analyzers have an attenuator at the input port, set the attenuation ATTEN to 0 dB.
6. If your spectrum analyzer integrates a quasi-peak detector, turning it on will help reduce the amplitude of radio disturbances in the environment.
7. Set the reference level of the spectrum analyzer reasonably. It is recommended to set it below -40dBm.
8. Connecting to the RF amplifier has the advantage of amplifying useful signals, but the disadvantage is that it also amplifies noise.
Package included
1 x Broadband Antenna
| Weight | 0.331 kg |
|---|
Related products
Long Wave Medium Wave Short Wave Ultrashort Wave DC Bias DC Isolator Coaxial Feed 100K-150MHz
$19.67RF amplifierAdd to cartUse1. RF power supply for active antenna2. The output of the broadband amplifier is blocked3. Communication data is injected through the RF endWorking parameters1. Frequency range:100K-150MHz2. Insertion loss:0.1dB@100KHz 0.2dB@150MHz3. Maximum voltage:50V4. Maximum current:500mA5. Radio frequency connector:SMA-K (outer screw inner hole)6. System impedance:50 ohm7. Dimensions:33mmx33mm without connectorsWiringDC:External DC power supplyRF:Radio frequency signal terminal (this port can …
Band Pass RF Filter Band Pass 1420MHz BPF
$87.47RF amplifierAdd to cartTechnical index1) Operating frequency:1420÷50MHz2) Insertion loss:1.8db3) Out-of-band suppression:40dB@50MHz4) Input impedance:50 ohm5) Output impedance:50 ohms6) Maximum input signal strength:13dbm (20mw)7) Input interface:SMA-K (SMA female)8) Output interface:SMA-K (SMA female)9) Dimensions:35*22*11mm10) Product weight:22gPackage includes1 x Band Pass RF Filter
1:2 1-56MHz 200W Balun HAM Shortwave Antenna Balun 50 ohm to 100 ohm Unbalanced Balance
$56.85RF amplifierAdd to cartThe main parameters1. The transformation ratio is 1:22. Input impedance:50 ohms (unbalanced)3. Output impedance:100 ohms (balance) suitable for QUAD ANT antenna4. Frequency range:1-56MHz5. Standing wave:less than 1.56. Power resistance:500w7. Dimensions:outer diameter 50x130mm8. Weight:350 grams9. Comes with epoxy resin plate and 304 stainless steel lifting ring, with two copper noses for connecting the vibrator, convenient for …
1:2 1-56MHz 200W Balun HAM Shortwave Antenna Balun 50 ohm to 100 ohm Unbalanced BalanceRead More
433MHZ 5W RF Antenna Power Amplifier Board High Frequency Digital Power Amplifier Board
$41.86RF amplifierAdd to cartSpecificationWorking frequency:433MHzInput power:0.1W (20dBm)Maximum output:2.5W (34dBm) 5.0V power supply5.0W (37dBm) 7.2V power supply8.0W (39dBm) 10.0V power supply (not recommended)Working voltage:5–7.2V (DC)Working current:1–2A (determined by output power)RF connector:standard SMA femaleDimensions:50*50*15mm (length * width * height)Product weight:55g (with heat sink)Package included1 x Amplifier Board
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.