3Pcs D1 R2 WiFi ESP8266 Development Board Compatible UNO Program
$43.20
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
The D1 R2 is a mini wifi board based on ESP-8266EX.
11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
1 analog input(3.3V max input)
A Micro USB connection
A power jack, 9-24V power input.
Compatible with
Compatible with nodemcu
Getting Started
Getting Started
NodeMcu
Getting Started
Technical specs
Microcontroller:ESP-8266EX
Operating Voltage
3.3V
Digital I/O Pins:11
Analog Input Pins
1
Clock Speed:80MHz/160MHz
FLash
4M bytes
Length:68.6mm
Width
53.4mm
Weight:25g
Pin
Function
ESP-8266 Pin
TX:TXD:TXD
RX
RXD
RXD
A0:Analog input, max 3.3V input:A0
D0
IO
GPIO16
D1:IO, SCL:GPIO5
D2
IO, SDA
GPIO4
D3:IO,Pull-up:GPIO0
D4
IO,pull-up, BUILTIN_LED
GPIO2
D5:IO, SCK:GPIO14
D6
IO, MISO
GPIO12
D7:IO, MOSI:GPIO13
D8
IO,pull-down, SS
GPIO15
G:Gound:GND
5V
5V
–
3V3:3.3V:3.3V
RST
Reset
RST
*All IO have interrupt/pwm/I2C/one-wire supported(except D0)
Programming
The D1 R2 has a micro USB for auto programming.
Also you can programming it using OTA
Warnings
All IO is work at 3.3V.
Package included
1 x D1 R2 WiFi ESP8266 Development Board
Weight | 0.09 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.